Cisco SPA509G How To Configure

Hide thumbs Also See for SPA509G:

Download this manual

How to Configure your Cisco SPA509G Phone

BRIEFING

Zang Office supports the Cisco SPA509G desktop telephone. Before it can be used with Zang Office, the

phone must be connected and configured for the Cloud.

Before you begin, you need to know (from your administrator):

•

CONNECTIONS

Assemble the telephone and connect it to your network using an Ethernet cable (included).

20180802

Your SIP Username.

Your SIP Password (click in this field to make the password visible).

Your company's Zang Office realm.

Navigation button

AC Power

(5VDC)

Setup button

Handset connector

Network connector

1 of 4

Page 1 How to Configure your Cisco SPA509G Phone BRIEFING Zang Office supports the Cisco SPA509G desktop telephone. Before it can be used with Zang Office, the phone must be connected and configured for the Cloud. Before you begin, you need to know (from your administrator): •...
Page 2 On your computer, open a web browser and enter the IP Address of the telephone in the address line. This will launch the Cisco Configuration Utility for this phone. Choose Admin Login. On the Regional tab, set your time zone.
Page 3 Open the Ext 1 tab. SIP Port: Set this value to 7000. The Cloud servers only operate through this port. Message Waiting: Set to yes. Proxy: Enter the value for your Zang Office Realm (e.g. company.office.zang.io:7000). User ID: Enter the Zang Office SIP Username. Password: Enter the Zang Office SIP Password.
Page 4 For all lines that are in use, give each a Short Name. This will appear beside the line button in the display. Click Submit All Changes. The telephone configuration is complete. The configuration is complete. Please refer to the Cisco manual for additional features and details. 4 of 4...