Table of Contents
Advertisement
08.99
05.00
Status word ZSW2
Table 5-16
Status word ZSW2
Bit
15
14
13
12
Integrator inhibit, speed controller
Note:
From the perspective of SIMODRIVE 611 universal, status signals are output signals and are described
in Chapter 6.4.6.
Also refer in the index under "Output signal, digital ...").
1) Only available in the n–set mode
Status word
For closed–loop speed controlled operation, the speed actual value is
NIST_A
displayed as follows:
NIST_B
Note
The speed actual value is signaled in the same format as the speed
setpoint is specified
(refer to control word NSOLL_A (nsoll–h) and NSOLL_B (nsoll–(h+l)).
E Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
Slave sign–of–life
(from SW 3.1)
Motor being changed over (from SW 3.3)
Actual motor 1st signal (from SW 2.4)
Actual motor 1st signal (from SW 2.4)
Suppress fault 608 active (from SW 3.1)
11
10
9
8
7
Parking axis selected
Open holding brake
Ramp–function gen. inactive
First speed setpoint filter inactive
NIST_B
ZSW
1
NIST_A
nist–h
NIST_A (nist–h)
NIST_B (nist–(h+l))
5 Communications via PROFIBUS DP
5.6
Net data (PKW and PZD area)
1)
1)
6
5
4
3
Bit 2
Parameter set
Bit 1
ZSW
2
nist–l
––> lower resolution
––> higher resolution
ZSW
2
1)
2
1
0
Bit 0
5-235
5
Advertisement
Chapters
Table of Contents
