Epson Stylus Pro 7400 Notice Sheet
Hide thumbs
Also See for Stylus Pro 7400:
- Service manual (428 pages) ,
- Unpacking and setup manual (27 pages) ,
- User manual (393 pages)
Advertisement
Quick Links
About installing the printer software
In the Installing the Printer Software section of the Setup Guide, the step "Select Local or Network." is
not necessary. Skip step 5 (For Windows) or step 6 (For Mac OS 9.x and Mac OS X).
About paper margin
In the Control Panel and Product Information section of the Reference Guide, the supported paper margins
are incorrect. The correct paper margins should be DEFAULT, T/B 15 mm,
T/B 25 mm, 15 mm, and 3 mm.
Margin settings
DEFAULT
T/B 15 mm
T/B 25 mm
15 mm
3 mm
The following table shows the default paper margin for the paper.
Roll Paper
Plain Paper
Singleweight Matte Paper
Enhanced Matte Paper
Premium Semimatte Photo Paper (250)
Premium Luster Photo Paper (250)
Photo Paper Gloss 250
Photo Glossy Paper
Photo Semigloss Paper
Textured Fine Art Paper
UltraSmooth Fine Art Paper
Proofing Paper Semimatte
Premium Glossy Photo Paper (250)
Premium Semigloss Photo Paper (250)
Note:
When you set the margin once, the margin applies to all media. To change the paper margin, select the target
margin setting again.
Try T/B 25 mm when smear may result in the top and bottom areas.
When you select the paper margin setting except DEFAULT, the following number appears on the right
side of the paper mark on the printer's control panel.
Margin settings
T/B 15 mm
T/B 25 mm
15 mm
3 mm
NOTICE SHEET
Top
Bottom
See the list below.
15 mm
15 mm
25 mm
25 mm
15 mm
15 mm
3 mm
3 mm
Top/Bottom
15 mm
20 mm
Number
1
2
1
0
Copyright © 2005 Seiko Epson Corporation. All rights reserved.
Printed in Japan 05. xx-xx
Left/Right
3 mm
3 mm
3 mm
15 mm
3 mm
Left/Right
3 mm
3 mm
Advertisement
Related Manuals for Epson Stylus Pro 7400
Summary of Contents for Epson Stylus Pro 7400
- Page 1 When you select the paper margin setting except DEFAULT, the following number appears on the right side of the paper mark on the printer’s control panel. Margin settings Number T/B 15 mm T/B 25 mm 15 mm 3 mm Copyright © 2005 Seiko Epson Corporation. All rights reserved. Printed in Japan 05. xx-xx...
- Page 2 About Platen Gap In the Control Panel section of the Reference Guide, the description about Platen Gap on the Custom Paper menu is incorrect. WIDEST is not supported, so read it as below. You can adjust the distance between the print head and paper. Normally, leave this set to STANDARD. If you find that printed images are smeared, select WIDE.
- Page 3 2. Open the top cover and then use a soft, clean cloth to carefully remove any dust or dirt inside the printer. Wipe the gray part by following the directions of the arrows. If there is a serious problem of dirt on the inside of the printer, clean it using a soft, clean cloth dampened with mild detergent.
- Page 4 About the Black Ink Conversion Kit The Black Ink Conversion Kit is packed with the printer. Epson does not sell it as a consumable anymore. Note: Contact your dealer if the Black Ink Conversion Kit is needed.