Related Manuals for Access Security Products DJ4M
Summary of Contents for Access Security Products DJ4M
- Page 1 DJ4M Audio Handset User Manual Read this manual carefully before using the product, and keep it well for future...
-
Page 2: Parts And Functions
1. Parts and Functions Handset Unlock button Call button/Unlock 2nd button Speaker handset curve Side View Key functions Handset Pick up to communicate with the visitor Handset cord Connect receiver with handset base Unlock button Press to release the door lock In standby mode, pick up the receiver, then press Call Call button/Un- button to activate the inner call;... -
Page 3: Terminal Descriptions
2. Terminal Descriptions SW+,SW- L1, L2 DIP2 DIP1 SW+,SW-: External door bell connection port L1,L2: Bus line connection K4: To change ring tone setting K3: To change ring tone volume DIP1(Bit1-6): To set the User Code of each handset DIP2(Bit1-3): To set Slave Handset Address 3. -
Page 4: Setup Instructions
4. Operation Instructions 1) Door release function: When a visitor calls from the door panel, the handset rings, pick up the receiver to talk with the visitor, then press the Unlock button to open the door. If the system is connected with 2 lock releases, press Unlock 2nd button to open the second door release 2) Inner call: (Intercom) Pick up the receiver, then press CALL button to activate... - Page 5 Bit state User Code Bit state User Code Bit state User Code Code=6 Code=17 Code=28 3 4 5 3 4 5 3 4 5 Code=7 Code=18 Code=29 3 4 5 3 4 5 3 4 5 Code=8 Code=19 Code=30 3 4 5 3 4 5 3 4 5 Code=9...
- Page 6 5.3 Ring Tone Setting There are four groups ring tones to choose from: Group name Items Tunes Door Panel DINGDONG Group 1 Intercom Call TELEPHONE_RING Door Bell DINGDONG Door Panel JINGLE_DELL Group 2 Intercom Call CARMAN Door Bell FOR_ALICE Door Panel HAPPY_BIRTHDAY Group 3 Intercom Call...
-
Page 7: Specification
2) Pick up the receiver in standby mode and press the K4 switch to replace a group of ring tones. Four groups of ring tones cycle: press K4 press K4 press K4 Group1 Group2 Group3 Group4 press K4 3) Put the receiver down to exit the settings 5.4 Ring tone Volume Setting 1) There are three kinds of ring tone volume (low-range, mid-range and high-range) to choose from...