Related Manuals for NEC MultiSync E243F
Summary of Contents for NEC MultiSync E243F
- Page 1 User’s Manual Desktop Monitor MultiSync E243F MODEL: E243F Please find your model name in the label on the rear side of the monitor.
-
Page 2: Table Of Contents
E243F .................27 OSD Controls List Appendix A Picture ................29 Setup ..................30 Sound .................29 Information ................30 Manufacturer’s Recycling and Energy Information Appendix B Disposing of your old NEC product ........32 WEEE Mark (European Directive 2012/19/EU and amendments) ..............32 Energy Saving ..............32... -
Page 3: Registration Information
The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. - Page 4 (4) The image shown in this manual is indicative only. If there is inconsistency between the image and the actual product, the actual product shall govern. (5) Notwithstanding articles (3) and (4), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using this device.
-
Page 5: Important Information
Important Information Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: About the Symbols To ensure safe and proper use of the product, this manual uses a number of symbols to prevent injury to you and others as well as damage to property. - Page 6 Please use the power cord provided with this product in accordance with the power cord table. If a power cord is not supplied with this product, please contact NEC. For all other cases, please use the power cord with the plug style that matches the power socket where the product is located.
- Page 7 WARNING Prevent tipping and falling for earthquakes or other shocks. To prevent personal injury or damage to the product caused by tipping over due to earthquakes or other shocks, make sure to install the product in a stable location and take measures to prevent falling.
- Page 8 CAUTION Handling the power cord. Handle the power cord with care. Damaging the cord could lead to fire or electric shock. • When connecting the power cord to the product’s AC IN terminal, make sure the connector is fully and firmly inserted. •...
- Page 9 OOTEN: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle, or turn off the monitor when not in use.
- Page 10 • Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue due to insufficient contrast. • Suitable for entertainment purposes at controlled luminous environments, to avoid disturbing reflections from the screen. For more detailed information on setting up a healthy work environment, write to the American National Standard for Human Factors Engineering of Computer Workstations - ANSI/HFES 100-2007 - The Human Factors Society, Inc.
-
Page 11: Product Features
Product Features • USB Type-C ith Power Delivery Supports video & audio input, USB hub function and supplies power to connected devices by a single cable, which provides flexible connectivity in a tidy work environment. • USB Hub 3.1 Nen.1 The USB hub adds flexibility to your computing by providing easy access to USB SuperSpeed data transfer and charging via USB. -
Page 12: Installation
Installation Chapter 1 This Chapter Includes: > “Parts Name and Functions” on page 11 > “Connections” on page 13 > “Setup” on page 15 > “Flexible Arm Installation” on page 18 English−10... -
Page 13: Parts Name And Functions
Parts Oame and Functions Control Panel Item Function A LED Indicates that the power is on. Turns the monitor on and off. B Power C EXIT button When the OSD menu is not displayed on the screen, it opens the VIDEO INPUT menu (When selecting AUTO input, the monitor selects the active signal input automatically). -
Page 14: Terminal Panel
Terminal Panel Headphone USB Downstream (Type-A) Security Slot Label AC IN Connector USB Downstream (Type-A) DisplayPort IN HDMI IN USB-C AC IO Connector USB Downstream Port (Type-A) Connects with the supplied power cord. Connects with USB devices. Connects with external equipment such as a computer HDMI IO compliant with USB. -
Page 15: Connections
Connections Video Input Connections • HDMI – High definition digital video and audio signal connection to a computer, streaming media player, Blu-ray player, game console, etc. • DisplayPort – High definition digital video and audio signal connection to a computer. •... - Page 16 Connecting to a Computer with DisplayPort • Please use a DisplayPort cable with the DisplayPort compliance logo. • It may take a moment for the signal to appear after turning on the computer. • When connecting a DisplayPort cable to a component with a signal conversion adapter, an image may not appear. •...
-
Page 17: Setup
Setup For box contents, please refer to the printed contents sheet provided in the box. The accessories included depends on the location where the monitor was shipped. To attach the base stand to the monitor standN: 1. Place monitor face down on a non-abrasive surface (Figure 1). 2. - Page 18 3. Connect devices to the monitor. Headphone USB Downstream (Type-A) HDMI DisplayPort USB-C USB Downstream (Type-A) Power cord HDMI DisplayPort Type-C CAUTIOON: • Use the provided specified cables with this product so as not to interfere with radio and television reception.
-
Page 19: Adjustable Stand With Pivot Capability
5. Please check that you can still raise and lower the monitor screen after you have installed the cables (Figure 5 and Figure 6). Power Cord USB Cable USB Cable Power Cord DisplayPort Cable DisplayPort Cable Figure 5 Figure 6 6. -
Page 20: Flexible Arm Installation
Flexible Arm Installation This monitor is designed for use with a flexible arm. Contact NEC for more information. Follow the instructions provided by the manufacturer of the display mount. Remove the monitor stand before mounting. AROIONN: Please refer to “WARNING 8”. -
Page 21: Re-Attaching The Original Stand
Re-attaching the Original Stand Reverse the process in the previous section to re-attach stand. OOTEN: Match “TOP SIDE” mark on stand to top side of the monitor when re-attaching stand. “TOP SIDE” mark Please match top side of the monitor Attaching VESA Plate for Thin Client Computer This LCD monitor is designed for mounting a thin client computer by using a VESA plate and screws. -
Page 22: Basic Operation
Basic Operation Chapter 2 This Chapter Includes: > “Using the OSD (On-Screen Display) Controls” on page 21 > “Changing the Input” on page 22 > “Power management function LED indicator patterns” on page 22 English−20... -
Page 23: Using The Osd (On-Screen Display) Controls
Using the OSD (On-Screen Display) Controls OSD (On-Screen Display) control button on the front of the monitor function as follows: • To open the OSD menu, press the EOTER button. PICTURE BRIGHTNESS SOUND ECO MODE SETUP CONTRAST INFOMATION COLOR USER GREEN BLUE SHARPNESS... -
Page 24: Changing The Input
Changing the Input Changing the Input To change the signal input, press the EXIT button. OOTEN: When selecting [AUTO] input, the monitor selects the active signal input automatically. For HDCP Content HDCP is a system for preventing illegal copying of video data sent over a digital signal. If you are unable to view material via the digital inputs, this does not necessarily mean that the monitor is not functioning properly. -
Page 25: Troubleshooting
Troubleshooting Chapter 3 This Chapter Includes: > “Screen Image and Video Signal Issues” on page 24 > “Hardware Issues” on page 25 > “Image Persistence” on page 26 English−23... -
Page 26: Screen Image And Video Signal Issues
Screen Image and Video Signal Issues Oo picture • Make sure the signal cable is fully connected to the monitor and the computer. • Make sure there is no DisplayPort converter adapter connected. The monitor does not support DisplayPort converter adapter. •... -
Page 27: Hardware Issues
Hardware Issues button does not respond • Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor. Message “OUT OF RAONE” is displayed (screen is either blank or shows rough images only) •... -
Page 28: Image Persistence
OOTEN: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle, or turning off the monitor when not in use. -
Page 29: Specifications
Specifications Chapter 4 E243F Monitor Specifications MultiSync E243F Ootes LCD Module Diagonal: 60.47 cm/23.8 inches Active matrix; thin film transistor (TFT) liquid crystal Viewable Image Size: 60.47 cm/23.8 inches display (LCD); 0.275 mm dot pitch; 250 cd/m white Native Resolution: 1920 x 1080 60 Hz luminance;... -
Page 30: Osd Controls List
OSD Controls List Appendix A This Chapter Includes > “Picture” on page 29 > “Sound” on page 29 > “Setup” on page 30 > “Information” on page 30 Default values can be provided on request. English−28... -
Page 31: Picture
Picture Picture Menu BRIGHTNESS Adjusts the overall image and background screen brightness. ECO MODE Decreases the amount of power consumption by reducing the brightness level. OOTEN: When [DV MODE] is [ON], [ECO MODE] is set to [OFF] and cannot be changed. Sets brightness variable from 0% to 100%. -
Page 32: Setup
Setup Setup Menu EXPANSION Sets the Zoom method. FULL The image is expanded to full screen regardless of the resolution. ASPECT The image is expanded without changing the aspect ratio. RESPONSE IMPROVE Turns the [RESPONSE IMPROVE] function [ON] or [OFF]. This function may reduce blurring that occurs in some moving images. - Page 33 > “WEEE Mark (European Directive 2012/19/EU and amendments)” on page 32 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help define and comply with the latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).
-
Page 34: Disposing Of Your Old Nec Product
Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.