Table of Contents
Advertisement
Langer & Laumann Ingenieurbüro GmbH
8.3 Stop input
The TSG electronic board has a separate input for stop. If the connection on terminal strip X5 between
terminals 1 and 2 is opened, the motor is stopped (electronic brake applied).
After the connection is restored, the TSG door control device resumes normal operation.
In normal operation, there is a wire bridge present between X5.1 and X5.2.
CAUTION:
No external voltage may be connected to terminals X5.1 and/or X5.2. Doing so will cause
irreparable damage to the TSG electronic board and may result in uncontrolled door
movements!
WARNING:
The stop function does not correspond to the requirements of Standard EN954 and is
therefore not subject to any safety category! The function must not be used in safety-relevant
control applications!
8.4 Restart after power failure and restoration of mains power
After a power failure, when power is restored, the TSG door control unit searches for the programmed end
position at the speed set by parameter h6. If parameter h7 is utilized the door control unit will search for the
second position at the speed is set in parameter h7.
CAUTION:
Please ensure that the path of the door is free from obstruction during the referencing journey
after power failure.
Geschäftsführer
/ Managing Director
Dipl.- Ing. Michael Laumann
Dipl.- Ing. Matthias Langer
48356 Nordwalde
Wallgraben 30
Bankverbindung
/ Bank Account
Sparkasse Steinfurt
BLZ: 40351220 Kto: 7024631
BIC
WELADED1STF
IBAN
De52 4035 1060 0007 0246 31
Volksbank Greven EG
BLZ: 40061238 Kto: 8623333000
BIC
GEBODEM1GRV
IBAN
De66 4006 1238 8623 3330 00
29
Langer & Laumann
I n g e n i e u r b ü r o
+49 (02573) 9 55 99 0
+49 (02573) 9 55 99 5
Handelsregister
Amtsgericht Steinfurt HRB 2943
Ust.-Id.Nr.
Steuer-Nr. 311 5870 1056
G m b H
http://www.LuL-Ing.de
Email: Info@LuL-Ing.de
appears in the display.
/ Comercial Register
/ Vat-No.
De195553428
Hide quick links:
Advertisement
Table of Contents
