Installing The Module - Cisco Catalyst 2900 XL Series Installation And Configuration Manual
Atm modules
Hide thumbs
Also See for Catalyst 2900 XL Series:
- Hardware installation manual (138 pages) ,
- Quick start manual (13 pages) ,
- Brochure (411 pages)
Table of Contents
Advertisement
Installing the Module
Installing the Module
Before you install the ATM module, select an expansion slot on the front panel of the
switch. Figure 2-1 shows a Catalyst 2900 series switch with blank faceplates for expansion
slot A and expansion slot B. If you are replacing an existing module, refer to the "Removing
the Module" section before you begin.
Figure 2-1
Warning
Warning
Caution
the rubber plugs from the fiber-optic connector on the module or the rubber caps from the
fiber-optic connector on the cable until you are ready to connect the cable to the module.
The plugs and caps protect the fiber-optic connectors from contamination and ambient
light.
Caution
metal to avoid electrostatic discharge.
2-4
Catalyst 2900 Series XL ATM Modules Installation and Configuration Guide
Catalyst 2900 Series XL with Blank Faceplates
Thumbscrews
Slot A
Class 1 laser product.
Avoid exposure to the laser beam.
When installing an ATM MM Fiber or ATM SM Fiber module, do not remove
Before you install the ATM module, ground yourself by touching a piece of
Catal yst 2900
XL
SERIES
Slot B
Advertisement
Table of Contents
