Programming The Interface; Introduction 简介 - Honeywell HF680 User Manual
Hand-free area-imaging scanner
Hide thumbs
Also See for HF680:
- User manual (190 pages) ,
- Quick start manual (14 pages) ,
- User manual (51 pages)
Table of Contents
Advertisement
Programming the Interface
Introduction
This chapter describes how to program your system for the desired interface.
Currently the scanner support three kinds of communication interface, RS232, USB HID and USB Serial.
You can scan the following barcodes to switch the scanner into specific interface.
You should also change the cable after that.
本章主要介绍如何对系统中使用的接口进行编程设置。
目前读码器支持三种通信接口，分别是 RS232、USB HID 和 USB 串行接口。
扫描以下条码即可将读码器切换为相应的接口。
接口设置改动之后，请务必更换相应的连接线。
(1)
RS232
(2)
USB HID
(3)
USB Serial USB 串行接口
接口编程设置
简介
RS232 Interface
RS232 接口
USB HID Interface
USB HID 接口
USB Serial Interface
USB 串行接口
3 – 4
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
