hit counter script
Download Print this page

Advertisement

LFV 80, LFV 100
EN
Operator's manual
2-19

Advertisement

loading

Summary of Contents for Husqvarna LFV 80

  • Page 1 LFV 80, LFV 100 Operator's manual 2-19...
  • Page 2: Table Of Contents

    With the optional water tank, the product can also product can also be used for block paving. Do not use be used for compaction of asphalt. the product for other tasks. Product overview LFV 80, LFV 100 1. Water tank (optional) 7. Vibration damping units 2. Water valve 8.
  • Page 3 13. Operator's manual Engine overview Honda Hatz 1. Muffler 2. Fuel tank Unleaded gasoline with a maximum of 10% 3. Fuel tank cap ethanol. 4. Spark plug 5. Air filter 6. Throttle control 7. Starter rope handle Ultra-low-sulfur diesel fuel only 8.
  • Page 4 1. Product type 2. Product number 3. Product weight 4. Serial number 5. Manufacturer Lifting point on the safety frame. 6. Rated power 7. Production year Product liability Do not attach the lifting equipment at this point. (L) As referred to in the product liability laws, we are not liable for damages that our product causes if: Noise emission to the environment as referred to in the EC directive.
  • Page 5 • Do not let a person operate the product unless they • Before you go away from the product, stop the read and understand the contents of the operator's engine and make sure that there is no risk of manual. accidental start.
  • Page 6 • Keep your hands on the handle or handles only. • Do not use a combustion engine product indoors or Keep all other body parts away from the product. in areas that do not have sufficient airflow. • Stop the product immediately if strong vibrations •...
  • Page 7 Do a check of the safety devices regularly. If the • Replace the vibration damping units if it is safety devices are defective, speak to your necessary. Husqvarna service agent. Fuel safety Muffler The muffler keeps the noise levels to a minimum and WARNING: Read the warning instructions sends the exhaust fumes away from the operator.
  • Page 8: Introduction

    Operation Introduction Water tank For LFV 80, LFV 100 there is an optional water tank for compaction of asphalt. WARNING: Read and understand the safety chapter before you use the product. CAUTION: Do not add other fluids than water to the water tank.
  • Page 9 To start the product (Honda) 5. Pull the starter rope handle slowly until you feel resistance. 1. Open the fuel valve. 2. Set the throttle control to ⅓ throttle. 6. Release the starter rope handle to let the starter rope go back. 7.
  • Page 10 To start the product (Hatz) 6. Set the throttle control (A) to full throttle. 1. Set the throttle control (A) to half throttle. To do if the engine does not start 2. Pull the starter rope handle slowly until you feel If the engine does not start and white smoke shows, do resistance.
  • Page 11: Maintenance

    1. Make sure that the throttle control is set to full 3. To change direction, turn the product around. throttle. a) To turn the product with a minimum turning 2. Carefully push the product forward. radius, lift the handle to a 90 degrees angle. Use this function in small spaces and on ground that CAUTION: Do not push the product is not level.
  • Page 12 Engine maintenance, Honda Before use, After the Weekly, Yearly, each each 10 h first 20 h each 100 h 300 h Replace the spark plug. Clean the fuel valve of the carburetor. Clean the spark arrester screen on the muffler. Adjust the valve head clearance for the air intake and the exhaust valves.
  • Page 13 To replace the engine oil (Honda) 1. Put a container below the oil drain plug (A) or (B). If the engine is cold, start the engine for 1–2 minutes before you drain the engine oil. This makes the engine oil warm and easier to drain. WARNING: Engine oil is very hot directly after the engine stops.
  • Page 14 2. Remove the paper filter element and the foam filter 2. Remove the air filter (A). element (A). 3. Clean the air filter housing with a brush. 4. Examine the air filter for damage. 5. Tap the air filter against a hard surface or use a vacuum cleaner to remove the particles.
  • Page 15: Transportation, Storage And Disposal

    b) Move the engine rearward. c) Make sure that the V-belt pulleys align and tighten the 4 bolts. 6. Install the V-belt cover. Transportation, storage and disposal Transportation 1. Attach the lifting equipment at the lifting point of the safety frame. A label on the product identifies the correct position.
  • Page 16: Accessories

    This closes the valves and makes • When the product is no longer in use, send it to a sure that moisture cannot go into the engine Husqvarna dealer or discard it at a recycling cylinder. location. •...
  • Page 17 Technical data LFV 80 LFV 100 Honda Honda Hatz Engine oil capacity *, l/qts 0.6/0.63 0.6/0.63 0.9/0.95 Fuel consumption, l/h or qts/h 1.21 or 1.28 1.21 or 1.28 0.57 or 0.6 Water tank for asphalt, l/gal (optional) 13/3.4 13/3.4 13/3.4...
  • Page 18 Product dimensions Length including handle, Bottom plate contact area, 926/36.5 0.116/1.25 mm/in. /sq. ft. Length bottom plate, LFV 80 Handle height, mm/in. 942/37.1 570/22.4 mm/in. Height at lifting point on the 598/23.5 Width, mm/in. 420/16.5 safety frame, mm/in. Length including handle, Bottom plate contact area, 926/36.5...
  • Page 19 EC Declaration of Conformity EC Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Forward Plate Compaction Machine Brand Husqvarna Type/Model LFV 80, LFV 100 Identification Serial numbers dating from 2019 and onwards...
  • Page 20 www.husqvarnacp.com Original instructions 1142121-26 2020-02-24...

This manual is also suitable for:

Lfv 100