Advertisement
Quick Links
Installing Communication Modules
WARNING: The antenna(s) used for this transmitter must be installed to provide a separation distance of
at least 20 cm from all persons and must not be co-located or operating in conjunction with any other
antenna(s) or transmitter.
Installing the GSMVLP5 in the LYNX Touch Series Control
Ensure that SIM card and the connector board are securely installed in the GSMVLP5 before installing the
module in the LYNX Touch.
1. Install the provided FCC/IC label (P/N 800-08334) on the control's case back (refer to Figure 1).
2. Release the LYNX Touch front case from the back case by depressing the two locking tabs at the top of the
unit with the blade of a medium size screwdriver (Refer to Figure 2).
3. Install the GSMVLP5 into the LYNX Touch control front case. Ensure that the connector board is properly
seated into the receptacle on the control (Refer to Figure 2).
4. Secure the GSMVLP5 with the three provided screws (Refer to Figure 2).
5. Enable the GSMVLP5 device, configure alarm reporting and module supervision and register the device.
Refer to the "Program the Radio" and "Diagnostics" sections in the LYNX Touch Series Installation and
Setup Guide (P/N 800-06834 or higher).
For Documentation and Online Support:
Installation and Setup Guide
RF Exposure
LYNX TOUCH SERIES
FCC ID: CFS-8DLLYNXTOUCH1
IC: 573F-LYNXTOUCH1
THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES AND RSS 210 OF INDUSTRY
CANADA. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS
DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
COMPLIES WITH FCC RULES, PART 68 FCC REGISTRATION NO.: AC3AL05BL5000
RINGER EQUIVALENCE: 0.1B
Figure 1. FCC/IC Label Location
http://www.security.honeywell.com/hsc/resources/MyWebTech
GSMVLP5 GSM and
Communications Modules
LYNX TOUCH SERIES
FCC ID: CFS-8DLLYNXTOUCH1
IC: 573F-LYNXTOUCH1
CONTAINS TRANSMITTER MODULE
FCC ID: QIPMC55I
IC MODEL: LYNXTOUCH1
800-08126 1/11
Rev A
800-08115 1/11 Rev. B
ILP5 Ethernet
IC MODEL: LYNXTOUCHG1
IC: 7830A-MC55I
800-08334 2/11
Rev A
5000-100-186-V0
Advertisement
Related Manuals for Honeywell GSMVLP5
Summary of Contents for Honeywell GSMVLP5
- Page 1 (Refer to Figure 2). 3. Install the GSMVLP5 into the LYNX Touch control front case. Ensure that the connector board is properly seated into the receptacle on the control (Refer to Figure 2).
- Page 2 LYNX TOUCH LOCKING TABS 5000-100-151-V1 Figure 2. Installing the GSMVLP5 in the LYNX Touch Installing the ILP5 in the LYNX Touch Series Control Ensure that the connector board and cable are securely installed in the ILP5 before installing the module in the LYNX Touch.
- Page 3 ETHERNET CABLE TO ILP5 RJ45 RECEPTACLE LYNX TOUCH ALTERNATE INSTALLATION REMOVE ILP5 REMOVE ILP5 KNOCKOUT SPACER ILP5 SPACER RJ45 RECEPTACLE CONNECTOR BOARD ROTATED WRAP WRAP POINT CONNECTOR BOARD SCREW ILP5 RECEPTACLE LYNX TOUCH LOCKING TABS 5000-100-154-V1 Figure 3. Installing the ILP5 in the LYNX Touch...
- Page 4 Voltage Input Current: 83 mA, 100 Base T with traffic 41 mA, 10 Base T with traffic 2 Corporate Center Drive, Suite 100 P.O. Box 9040, Melville, NY 11747 Copyright © 2011 Honeywell International Inc. www.honeywell.com/security Ê800-08115!Š 800-08115 1/11 Rev. B...