Advertisement
Quick Links
Configure Static Internet Protocol (IP)
Address Settings on a Cisco IP Phone 7800
or 8800 Series Multiplatform Phone
Objective
By default, a Cisco IP Phone 7800 or 8800 Series Multiplatform Phone is assigned its IP
address through Dynamic Host Configuration Protocol (DHCP). The network device that
manages the phone chooses the IP address that the IP phone will use. The same IP phone
may or may not have a different IP address every time it connects to the network. In order for
an IP phone to have the same IP address each time it connects to the network, DHCP can
be disabled and an IP phone can be manually assigned a static IP address. With a single IP
address, configuration is easier because it provides a single known IP to access with, while a
dynamic IP makes it harder to locate and gain access to configure the phone.
The static IP address of the Cisco IP Phone 7800 or 8800 Series Multiplatform Phone can be
manually configured through the web-based utility or the Graphical User Interface (GUI). You
must configure the IP address, subnet mask, Domain Name System (DNS) server, and
default router settings manually on the phone.
This article provides instructions on how to configure the static IP address of the Cisco IP
Phone 7800 or 8800 Series Multiplatform Phone through the GUI or the web-based utility.
Applicable Devices
7800 Series
8800 Series
Software Version
11.0
Configure the Static IP Address Settings of the IP Phone
Configure Static IP Address Through the Web-based Utility
In this scenario, the Cisco IP Phone 8861 Multiplatform Phone is set up without the
availability of a DHCP server. Follow the steps below to configure a static IP address through
the web-based utility of the IP Phone:
Step 1. Access the web-based utility of your IP Phone then log in as Admin.
Note: To learn how to configure the password on your 7800 or 8800 Series Multiplatform
Phone, click here.
Advertisement
Related Manuals for Cisco IP Phone 7800 Series
Summary of Contents for Cisco IP Phone 7800 Series
- Page 1 IP makes it harder to locate and gain access to configure the phone. The static IP address of the Cisco IP Phone 7800 or 8800 Series Multiplatform Phone can be manually configured through the web-based utility or the Graphical User Interface (GUI). You must configure the IP address, subnet mask, Domain Name System (DNS) server, and default router settings manually on the phone.
- Page 2 Step 2. Click Voice > System. Step 3. In the IPv4 Settings area, choose Static IP from the Connection Type drop-down list. Step 4. Enter the IP address of the IP Phone in the Static IP field. Note: In this example, 192.168.100.116 is used.
- Page 3 Step 5. Enter the gateway address in the Gateway field. Note: In this example, 192.168.100.1 is used. Step 6. Enter the subnet mask in the NetMask field. Note: In this example, 255.255.255.0 is used. Step 7. Enter the primary DNS address in the Primary DNS field. Note: In this example, 192.168.100.1 is used.
- Page 4 IP Phone then choose Info > Status. The IPv4 Information area should display the updated configuration settings. You should now have successfully configured the static IP address settings on your Cisco IP Phone through the web-based utility.
- Page 5 Step 1. Press the Settings button on your IP Phone. Step 2. Choose Network Configuration using the circle navigation button. Step 3. Choose IPv4 address settings.
- Page 6 Step 4. Press the left or right arrows of the navigation button to choose Static IP. Step 5. Enter the IP address of the IP Phone in the Static IP address field.
- Page 7 Note: In this example, the IP address is 192.168.100.116. Step 6. Enter the subnet mask in the Subnet mask field. Note: In this example, the subnet mask is 255.255.255.0. Step 7. Enter the gateway address in the Gateway address field. Note: In this example, the gateway address used is 192.168.100.1.
- Page 8 Note: In this example, the primary DNS used is 192.168.100.1. Step 9. (Optional) Enter the secondary DNS address in the DNS 2 field. In this scenario, the Secondary DNS is left blank. Step 10. (Optional) Press the left or right arrows of the navigation button to toggle the DHCP address released setting to On or Off.
- Page 9 IP Phone then choose Status > Network Status. The Network status page should display the updated configuration settings. You should now have successfully configured the static IP address settings through the GUI of your Cisco 7800 or 8800 Multiplatform IP Phone.