Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear Protective
instructions
Footwear
1. SAFETY
Disconnect jack from air supply before changing parts, servicing or performing any maintenance.
9
WARNING! ensure correct air pressure is maintained and not exceeded.
‰
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use, and ensure that all connections are secure.
9
Ensure the jack is in sound condition and good working order. Take action for immediate repair or replacement of damaged parts.
9
Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
9
Use jack on level and solid ground, preferably concrete. Avoid tarmacadam as jack may sink in.
9
Place wedges under wheels of vehicle.
9
Ensure the vehicle handbrake is engaged, engine is switched off and transmission is in gear (or "Park" if automatic).
9
Ensure minimum distance of 0.5m between vehicle and static objects such as doors, walls, etc., to allow for vehicle tilting.
9
Only place jack under those lifting points recommended by vehicle manufacturer (see vehicle handbook).
9
Check that the jacking point is stable and centred on the jack saddle and is free from grease and oil.
9
Locate the jack in a suitable, well lit work area.
9
Keep work area clean and tidy and free from unrelated materials.
9
Use a qualified person to maintain or repair the jack's hydraulic system.
9
DO NOT top up hydraulic system with brake fluid. Use hydraulic jack oil only.
8
Ensure there are no passengers in the vehicle.
9
Ensure all non-essential persons keep a safe distance whilst the jack is in use.
9
▲
DANGER: Use the jack for lifting only, NOT for supporting the lifted load.
Use suitable capacity axle stands under the vehicle before proceeding with any task.
9
DO NOT allow untrained persons to operate the jack.
8
DO NOT operate the jack if parts are missing or damaged.
8
DO NOT exceed the rated capacity of the jack.
8
DO NOT allow the vehicle to move while supported by the jack, or use the jack to move the vehicle.
8
DO NOT jack the vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous substances.
8
DO NOT work under the vehicle until axle stands have been correctly positioned.
8
DO NOT use the jack for purposes other than that for which it is intended.
8
DO NOT adjust the safety overload valve.
8
DO NOT apply your body weight to the handle during jacking. The handle is only for moving the jack to and from the jacking location.
8
DO NOT yank the hose from the air supply, and DO NOT direct air from the air hose at yourself or others.
8
DO NOT use the jack if believed to have been subjected to abnormal load or shock. Inspect and take appropriate action.
8
Ensure that there are no persons or obstructions beneath the vehicle before lowering.
9
When not in use disconnect jack from the air supply, and store, fully lowered, in a safe, dry, childproof area.
9
WARNING! turn off air supply and de-pressurise the control nozzle before removing the pump unit from any installation or mobile system.
‰
Failure to comply with this instruction may damage the unit and will invalidate your warranty.
2. INTRODUCTION
Powerful and reliable, ideal for workshop or roadside use. At modest cost, it takes the effort out of lifting heavy plant, tractors or commercial
vehicles. Features dead man's controls and multi-position locking handle. Supplied with 20/60/90mm extensions to close the gap between the
between the saddle of the jack and the jacking point.
© Jack Sealey Limited
INSTRUCTIONS FOR
AIR OPERATED TROLLEY JACK 20TONNE
YAJ20B.V3
MODEL NO:
Original Language Version
YAJ20B.V3
Issue 3(S) - 21/06/17
Advertisement
Related Manuals for Sealey YAJ20B.V3
Summary of Contents for Sealey YAJ20B.V3
- Page 1 YAJ20B.V3 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 3. SPECIFICATION Model no: ............YAJ20B.V3 Max. capacity: ............20tonne Min. height: ..............228mm Max. height(including extension)/capacity: Stage 1 (mm/tonne): ........... 548/20 Stage 2 (mm/tonne): ............n/a Piston stroke: ............. 120mm Screw extension: ............110mm Extensions: ............20/60/90mm Chassis length: ............575mm Length including handle: ..........
- Page 3 Confirm that the piston can rise to the highest position. 7.8. If the air system does not have an oiler, lubricate the air pump once or twice a month with a few drops of Sealey air tool oil dripped into the air inlet to prolong air pump life. 7.9.
- Page 4 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...