Free Assignment Of D Numbers, Cutting Edge Numbers; Free Assignment Of D Numbers, Cutting Edge Numbers (Ce Address) - Siemens SINUMERIK 840D sl Programming Manual

Job planning

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Free assignment of D numbers, cutting edge numbers

The D numbers can be used as contour numbers. You can also address the number of the

cutting edge via the address CE. You can use the system variable $TC_DPCE to describe

the cutting edge number.

Default: compensation no. == tool edge no.

Machine data are used to define the maximum number of D numbers (cutting edge numbers)

and the maximum number of cutting edges per tool (→ machinery construction OEM). The

following commands are only practical if the maximum cutting edge number (MD18105) was

specified to be greater than the number of cutting edges per tool (MD18106). See machine

manufacturer's specifications.

In addition to relative D number allocation, the D numbers can also be assigned as "flat" or

"absolute" D numbers (1-32000) without a reference to a T number (within the "Flat D

number structure" function).

Function Manual Basic Functions; Tool Offset (W1)

Job Planning

Programming Manual, 06/2009, 6FC5398-2BP20-0BA0

7.7 Free assignment of D numbers, cutting edge numbers

Tool offsets

Show Quick Links

Table of Contents

Sinumerik 828d Sinumerik 840de sl