Summary of Contents for JFL Alarmes LZ-530 SF
- Page 1 USER MANUAL LZ-530 SF Congratulations, You have just acquired a product with JFL Alarmes quality, produced in Brazil with the highest manufacturing technology. This manual presents the main functions and characteristics of the equipment. www.jfl.com.br...
-
Page 2: Table Of Contents
Í NDICE 1 INTRODUCTION..................................3 1.1 OVERALL CHARACTERISTICS............................3 2 MAIN COMPONENTS................................4 3 INSTALLATION..................................4 4 DETECTION RANGE................................5 5 PRECAUTIONS/RECOMMENDATIONS..........................6 www.jfl.com.br... -
Page 3: Introduction
INTRODUCTION The LZ-530 SF is a motion detection sensor that has low current consumption, being managed by a micro-controlled circuit that digitally analyzes the signal of the double-element pyroelectric sensor. This digital treatment uses the information of amplitude, width, and polarity of the signal, besides the repetition interval, to ascertain the real intrusion and thus avoid unwanted triggerings. -
Page 4: Main Components
8) Battery: 3V CR123 Lithium. INSTALLATION The LZ-530 SF sensor may be programmed in all the JFL central units and receivers that work at the 433.92 MHz frequency in the Hopping Code system. www.jfl.com.br... -
Page 5: Detection Range
30 seconds. Press and release the LEARN button of the central unit or receiver; just after, press and hold the TEST button of the LZ-530 SF sensor. With this, it will be programmed. With the front lid closed, walk slowly in front of the sensor observing the trigger (the Trigger LED turns on for 3 seconds) in the entire area you wish to protect. -
Page 6: Precautions/Recommendations
Figure 3 PRECAUTIONS/RECOMMENDATIONS Follow the instructions below to avoid unwanted triggerings. Do not install the detector pointed towards a staircase/stairway on which a pet could access. DO NOT install the sensor directed towards reflective surfaces, infrared light sources, or close to objects that cause abrupt temperature changes such as windows, fans, or heaters. - Page 7 DO NOT place objects or furniture with heights over 0.8 m that a pet may escalate (for example, a cat and a sofa). DO NOT install the sensor in open areas VERIFY the distance between the sensor and the central alarm unit. AVOID installing the sensor on metallic surfaces, close to radiofrequency equipment, or in...
- Page 8 JFL EQUIPAMENTOS ELETRÔNICOS IND. COM. LTDA Rua João Mota, 471 - Jardim das Palmeiras CEP 37.540-000 - Santa Rita do Sapucaí / MG Fone: (35) 3473-3550 www.jfl.com.br LZ-530 SF REV.:01 30/07/2020 www.jfl.com.br ECR-18 cloud, ECR-18i cloud e ECR-18 lite rev. 00 04/05/2018...