Finisher; Part Names; Supplies - Sharp MX-C380 Operation Manual

Digital full colour multifunctional system

Hide thumbs Also See for MX-C380:

Table of Contents

FINISHER

The finisher is equipped with the offset function, which offsets each set of output from the previous set.

In addition, each set of sorted output can be stapled.

The following parts can be accessed when the finisher is open.

Stapled and offset output is delivered to this tray.

The tray is slidable. Extend the tray for large output

(8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 13-1/2", and

8-1/2" x 13-2/5" sizes).

Use this to move the finisher in order to remove a paper

misfeed, replace staples, or remove a staple jam.

Use caution when you turn on the power and when printing is taking place, as the tray may move up and down.

The finisher requires the following staple cartridge:

Staple cartridge

(approx. 5000 staples per cartridge x 3 cartridges)

BEFORE USING THE MACHINE

Open this cover to remove a paper misfeed, replace

staples, or remove a staple jam.

This holds the staple cartridge. Pull the case out to

replace the staple cartridge or remove a staple jam.

Staple case release lever

Use this to remove the staple case.

Table of Contents

Mx-c310 Mx-c400