Siemens SITRANS P Operating Instructions Manual page 45
Pressure transmitter
Hide thumbs
Also See for SITRANS P:
- Brochure & specs (234 pages) ,
- Compact operating instructions (94 pages) ,
- Operating instructions manual (25 pages)
Table of Contents
Advertisement
Vibrations in the plant
Risk of injury or damage to device.
Vibration leads to material fatigue, for example, cracks and weld seams breaks.
Hot, toxic and corrosive process media can emerge.
● Make sure that you have mounted the pressure transmitter (including accessories)
Hot surfaces resulting from hot process media
Risk of burns resulting from surface temperatures above 65 °C (149 °F).
● Take appropriate protective measures, for example contact protection.
● Make sure that protective measures do not cause the maximum permissible ambient
External stresses and loads
Damage to device by severe external stresses and loads (e.g. thermal expansion or pipe
tension). Process media can be released.
● Prevent severe external stresses and loads from acting on the device.
Note
Material compatibility
Siemens can provide you with support concerning selection of sensor components wetted by
process media. However, you are responsible for the selection of components. Siemens
accepts no liability for faults or failures resulting from incompatible materials.
SITRANS P320/P420 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E44852162-AC
WARNING
protected against vibration.
Refer to the information on vibration resistance in the section Technical specifications.
CAUTION
temperature to be exceeded. Refer to the information in Technical data (Page 199).
CAUTION
Installing/mounting
5.1 Basic safety instructions
45
- Quick Links:
- Commissioning the Device with Display
- Buttons
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
