Siemens SITRANS P Operating Instructions Manual page 48
Pressure transmitter
Hide thumbs
Also See for SITRANS P:
- Brochure & specs (234 pages) ,
- Compact operating instructions (94 pages) ,
- Operating instructions manual (25 pages)
Table of Contents
Advertisement
Installing/mounting
5.2 Installing
Lay the pressure tubing with a constant gradient to the pressure sampling point so that any gas
pockets can escape in the main line.
Mounting location
Verify that the mounting location meets the following conditions:
● Accessible
● Close to the measuring point
● Vibration-free
● Within the permitted ambient temperature values
Protect the pressure transmitter from:
● Direct heat radiation
● Rapid temperature fluctuations
● Heavy contamination
● Mechanical damage
● Direct sunlight
Requirement
● You have compared the desired operating data with the data on the nameplate.
● You have adhered to the information on the remote seal during its installation.
Procedure
1. Attach the pressure transmitter to the process connection.
Use an appropriate tool (e.g. open-ended wrench with width across flats 36). Otherwise, the
measuring cell may be damaged.
2. Turn only on the key area above the process connection.
Caution: If you turn the pressure transmitter on the housing, the measuring cell may be
damaged.
48
SITRANS P320/P420 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E44852162-AC
- Quick Links:
- Commissioning the Device with Display
- Buttons
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
