Table of Contents
Advertisement
1-11. How to Take Out the Cassette Whose Tape is Slacked
1-11. How to Take Out the Cassette Whose Tape is Slacked
1. Open the display panel.
2. Insert a driver or similar item into the rectangular hole and unhook as shown in the figure. Open the
control panel.
3. Turn the manual eject knob counterclockwise.
n
Operating procedure for manual eject knob differs depending on the serial number of the VTR.
4. Tape starting to slack, turn the capstan cap portion counterclockwise to take up the tape to the T reel.
5. Repeat procedures 3 and 4 until the cassette compartment is opened.
m
. Stop turning the manual eject knob just when the cassette compartment is opened.
. If the cassette compartment cannot be closed after taking the tape out by the above procedure, try to
turn the manual eject knob clockwise two or three turns.
Driver
Hole
Hook
Cassette compartment
DNW-A220 (SY)
S/N 31001 through 31090
1-38
Control panel
Manual eject
knob (white)
Capstan cap
portion
DNW-A220P (SY)
S/N 31001 through 31080
51001 through 51090
51001 through 51080
Display panel
Manual eject
knob (red)
Capstan cap
portion
DNW-A220 (SY)
DNW-A220P (SY)
S/N 31091 and higher
S/N 31081 and higher
51091 and higher
51081 and higher
DNW-A220
DNW-A220P
Hide quick links:
Advertisement
Chapters
Table of Contents
