Advertisement
Quick Links
Model TE1/TE1R for Windows and Linux
EC Declaration of Conformity
FarSite Communications Limited declare that the product FarSync TE1/TE1R is in conformity with the
following standards and other documents:
Electromagnetic compatibility (EMC Directive 2004/108/EC): EN55022, EN61000-6-2
Safety (LVD Directive 2006/95/EC): EN60950
This equipment is intended for attachment to public or private leased lines.
This equipment meets Class A EMC requirements. To meet Class B requirements when the RJ48C interface is used, a
ferrite clamp (supplied with the product) must be fitted to the cable within 75mm of the RJ48C card connector.
Federal Communications Commission (FCC) Statement
Radio Frequency Interference (RFI) (FCC 15.105)
The FarSync TE1/TE1R has been tested and found to comply with the limits for Class B digital devices pursuant to
Part 15 Subpart B, of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential environment. This equipment generates, uses and can radiate radio frequency energy, and
if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment causes harmful interference to radio or television reception, which can be determined by switching the
equipment off and on, the user is encouraged to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and the receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
•
Consult the dealer or and experienced radio/TV technician for help
Labelling requirements (FCC 15.19)
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
which may cause undesired operation.
Modifications
Changes or modifications to this equipment not expressly approved by FarSite may void the user's authority to
operate this equipment.
FCC Declaration of Conformity
(In accordance with FCC dockets 96-208 and 95-19)
Manufacturer's name: FarSite Communications Limited
Tempus Business Centre, 60 Kingsclere Road, Basingstoke
Hampshire, RG21 6XG, United Kingdom
FarSite Communications Limited declares that the product FarSync TE1/TE1R to which this declaration relates, meet
the requirements specified by the Federal Communications Commission as detailed in the following specifications
• Part 15, Subpart B, for Class B Equipment
• FCC Docket 96-208 as it applies to Class B Personal Computers and Peripherals
The products have been tested at an external laboratory certified per FCC rules and has been found to meet the FCC,
Part 15, Class B emission limits. Documentation is on file and available from FarSite.
Industry Canada
This Class B digital apparatus meets the requirements of the Canadian Interference Causing Equipment regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le máteriel brouilleur du
Canada.
Page 4
FarSync Quick Start Guide
Regulatory Notices
www.farsite.com
FarSync Quick Start Guide
Thank you for choosing FarSync for your synchronous data communications needs. The FarSync product family
provides a full range of synchronous data communications solutions. The models covered by this guide are:
FarSync TE1
FarSync TE1R
The installation of the FarSync TE1/TE1R product has five basic steps.
•
Select cable connector type (TE1 only)
•
Install the hardware
•
Connect the cables
•
Install the FarSync driver software
•
Configure the FarSync drivers
Refer to page 2 of this guide for more instructions on each step. Note that Administrator privilege is required to
install the software under Windows. Installation under Linux should be performed as root. Use a web browser to
view the file \install.html file for further assistance on the software installation process.
Manuals on the FarSync CD are in HTML or Adobe Portable Document Format (PDF). If you do not already have
a suitable PDF reader installed a selection of readers can be found in the Acrobat directory on the FarSync CD.
Further readers for other platforms are available from Adobe.
N0323M-02 V1.1.4
N0323M-02 V1.1.4
FarSync TE1/TE1R
Q
S
UICK
TART
F
W
OR
INDOWS AND
An intelligent single port Universal PCI adapter for synchronous data communications over
an E1 interface. The card provides a physical connector for both BNC and RJ48C cables.
An intelligent single port Universal PCI adapter for synchronous data communications over
an E1 interface. The card provides a physical connector for RJ48C cables only.
www.farsite.com
Model TE1/TE1R for Windows and Linux
G
UIDE
L
INUX
Page 1
Advertisement
Summary of Contents for FarSite Communications FarSync TE1
- Page 1 INDOWS AND INUX The FarSync TE1/TE1R has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 Subpart B, of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment.
- Page 2 2, if you have a FarSync TE1 you may need to select the cable type as described below. The default configuration of the FarSync TE1 card is to use the RJ48C interface. If you wish to use a BNC cable,...