Advertisement
Quick Links
thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. Safety
WarninG! Read instructions before use. Suitable for 12V operation only.
‰
WarninG! This compressor is capable of producing a high pressure. do not inflate any item beyond its maximum capacity.
‰
do not leave the unit unattended while in operation.
8
Check capacity and maximum pressure of inflatable before commencing inflation.
9
monitor the pressure gauge while in operation.
9
The gauge should be used as an indication of pressure only. We recommend the use of a dial pressure gauge for definitive reading.
9
locate compressor on an appropriate surface for use.
9
The 12V auxiliary plug (MAC04) must not be substituted with any other type of plug or electrical supply.
9
do not direct inflation hose connector head at yourself, others or animals.
8
do not carry by the hose, or pull the hose sharply from a valve.
8
do not pull the power cable from the vehicle accessory socket or battery terminal by the power lead.
8
do not get the compressor wet or use in the rain.
8
do not use the compressor for a task it was not designed to perform.
8
do not operate the compressor when you are tired, under the influence of alcohol, drugs or intoxicating medication.
8
do not operate the compressor if any parts are missing as this may cause failure or possible personal injury.
8
do not open the unit.
8
Keep children and non essential persons away from the inflation area.
9
Keep the compressor clean and in good condition.
9
Replace or repair damaged parts. Use recommended parts only. non authorised parts may be dangerous and will invalidate the
9
warranty.
2. introduCtion
A range of heavy-duty mini air compressors with delivery between 25ltr and 95ltr/min. Air output hose features quick release coupling. Suitable for
inflating tyres on lawnmowers, motorcycles, cars, vans and 4x4s and commercial vehicles. Supplied in a storage bag with high pressure hose with
screw-on connector and accessory kit including ball needle and adaptors for inflatables.
3. SPeCifiCation
e
Model no
Hose length
Power cord length
operating voltage
Tyre Inflation time
(175/70/R13 tyre)
maximum current
Air delivery
Power connection
Applications
maximum pressure
Weight
4. oPeration
WarninG! Ensure you have read and understood the safety instructions. Place the compressor on a sound, flat surface ensuring that
‰
the inflation air hose can reach the tyre valve.
4.1.
Remove the valve cap and screw the air hose onto the tyre valve.
iMPortant: Inflation will only be effective if the connector head is fully fitted and secured onto the valve.
© Jack Sealey limited
tyre inflator/Mini air CoMPreSSorS 12V
heaVy duty
model no'S:
MaC04
1500mm
3mtr
12V
0-30psi in 139sec
13A
25ltr/min
Accessory plug
cars
lawnmowers, motorcycles,
100psi
1.85kg
Original Language Version
MaC04, MaC05, MaC06, MaC07
MaC05
4500mm
3mtr
12V
0-30psi in 104sec
20A
50ltr/min
Battery clamps
cars, vans
150psi
2.91kg
MaC06
7500mm
3mtr
12V
0-30psi in 60sec
0-30psi in 45sec
33A
75ltr/min
Battery clamps
Battery clamps
cars, vans, 4x4s
cars, vans,4x4s
commercial vehicles
150psi
4.65kg
mAC04, MAC05, MAC06, MAC07
Issue:2 (H) - 08/03/19
MaC07
7500mm
3mtr
12V
40A
95ltr/min
150psi
6.58kg
Advertisement
Related Manuals for Sealey MAC04
Summary of Contents for Sealey MAC04
- Page 1 MaC04, MaC05, MaC06, MaC07 model no’S: thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 All the compressors are protected by an automotive style blade fuse. The fuse on the MAC04 is situated in the connector plug, whereas the larger three models have their fuses housed in the rubber holder which is part of the supply lead. do not replace the fuse with any not of the same specification as the original.