Table of Contents
Advertisement
Mounting
2
2 Mounting
6 | 14
Building Technologies
Siemens Industry, Inc.
The releasing module XCI2001 is installed on the periphery board as shown and
screwed onto the back box. Slot X901 is also used for the NAC module (1A/2B).
Figure 1: Installing the releasing module on the periphery board
1
Periphery board (250p) or periphery board (500p)
2
Threaded standoffs on back box
3
Releasing module XCI2001
4
2x fixing screw
X901
Slot in periphery board
X5
Connection terminal on releasing module
1. Plug the releasing module (3) into slot X901 on the periphery board.
2. Fasten the releasing module to the threaded standoffs (2) in the back box using the
two fixing screws (4).
3. Wire up the releasing module according to the pin assignment.
A6V10315050_e_en_--
2016-10-27
Advertisement
Table of Contents
