Page 1
Nokia Customer Care RH-37 Cellular Phones 4 - Service Tools 2004 Nokia Corporation Issue 1 07/04 Page 1 Company Confidential...
Page 2
RH-37 Company Confidential Service Tools Nokia Customer Care This page has been intentionally left blank 2004 Nokia Corporation Page 2 Issue 1 07/04...
Page 4
RH-37 Company Confidential Service Tools Nokia Customer Care This page has been intentionally left blank 2004 Nokia Corporation Page 4 Issue 1 07/04...
Service Tools Service Tools List of service tools The table below gives a short overview of service tools that can be used for testing, error analysis and repair of product RH-37, refer to various set-ups. Type Description Part Code Designator...
Page 6
1pc Wing screw M3x20 for MJ-22 module jig 6290801 10pcs Test pins for SF-17 POS flash adaptor 0770450 10pcs Flash interface pins for DA-16 docking station adaptor 0770754 10pcs SIM interface pins for DA-16 docking station adaptor 0780447 2004 Nokia Corporation Page 6 Issue 1 07/04...
• Flash OK/FAIL indication In calibration mode JVB-1 is powered by external power supply 11-16V DC. In flashing power for the phone can be taken from FPS-8 or external power supply 11-16V DC. 2004 Nokia Corporation Issue 1 07/04 Page 7...
Nokia Customer Care DA-16 Docking Station Adapter (Product Code: 0770770) Docking station adapter for assembled RH-37 phones. The docking station adapter sup- ports testing, flashing, energy management calibration. If used in conjunction with the RF-coupler SA-25, also RF function testing is possible.
• easy attachment to DA-16 without use of tools • reliable RF connection to phone module under test • low attenuation and small “ripple” over the width of each GSM band View of SA-25 2004 Nokia Corporation Issue 1 07/04 Page 9...
Page 10
Nokia Customer Care Installing instructions for RF Coupler to Docking Station Adapter Open the housing by pressing the housing apart. Now you can remove the bottom plate of the docking station adapter. 2004 Nokia Corporation Page 10 Issue 1 07/04...
Page 11
Remove the four screws fixing the PWB by using Torx T6 screw driver. These screws are too short, therefore four longer screws are delivered together with the coupler. Install the coupler and use the new screws. 2004 Nokia Corporation Issue 1 07/04 Page 11...
Page 12
RH-37 Company Confidential Service Tools Nokia Customer Care Close the docking station adapter by attaching the bottom plate. Ready. 2004 Nokia Corporation Page 12 Issue 1 07/04...
Service Tools SF-17 CCS POS Flash Adapter (Product Code: 0770844) Point of sales flash adapter for RH-37 phones. SF-17 establishes a simple environment for SW update purposes and connects to the same flash test pattern and the phone battery contacts.
Service Tools Nokia Customer Care MJ-22 Module Repair Jig (Product Code: 0770843) Repair Jig for RH-37 phone module that allows full phone function. General features include: • easy phone module insertion and removal, proven jig locking mechanism • ESD-proof base material and jig design •...
Page 15
• FM ANT (X7) is not applicable for RH-37. • On left hand side there is a slit for IrDa which is not applicable for RH-37. • When shielding lids are removed from the shielding frame on the PWB, new shielding lids must be used for proper closing of the shielding.
• four (optional mount) rubber feet allow usage also on repair benches • fixation of phone module in both ways possible (bottom or top side up) • ESD proof material • standard uBGA jig thickness and outer dimensions View of RJ-17 2004 Nokia Corporation Page 16 Issue 1 07/04...
RH-37 Nokia Customer Care Service Tools SS-42 Camera Removal Tool (Product Code: 0780449) Used to unlock and lift out camera module. Note: Replaces SRT-10 which can only be used for unlocking. 2004 Nokia Corporation Issue 1 07/04 Page 17...
0770471 Note: For RH-37, another stencil than the one included in the rework kit SK-9 is needed, because another PWB pad layout is used. Therefore, ensure that for RH-37 the stencil ST-13 is used for PA repairs. 2004 Nokia Corporation...
2 Once the best fit location has been found, leave the PA there and put the stencil on top of the jig and PA. 3 Put soldering paste on the PA properly. 2004 Nokia Corporation Issue 1 07/04 Page 19...
Page 20
RH-37 Company Confidential Service Tools Nokia Customer Care 4 Remove the stencil and the PA from the jig. 5 Start the soldering process. 2004 Nokia Corporation Page 20 Issue 1 07/04...
View of FPS-11 ACF-8 Universal Power Supply (Product Code: 0680032) ACF-8 universal power supply is used to power FPS-8. ACF-8 has 6 V DC and 2.1 A out- put. View of ACF-8 2004 Nokia Corporation Issue 1 07/04 Page 23...
AXS-4 Service Cable (Product Code: 0730090) The AXS-4 D9-D9 service cable is used to connect two 9 pin D connectors e.g. between PC and FPS-8. Cable length is 2 meters. View of AXS-4 2004 Nokia Corporation Page 24 Issue 1 07/04...
Make sure that you have switched off the PC and the printer before making connections! Caution: Do not connected the PKD-1 to the serial port. You may dam age your PKD-1! View of SW Security Device 2004 Nokia Corporation Issue 1 07/04 Page 25...
Sales Pack - APAC 0080542 Sales Pack- US 0080543 View of FLS-4S PCS-1 Power Cable (Product Code: 0730012) The PCS-1 power cable (DC) is used to connect e.g. JVB-1 to FPS-8. View of PCS-1 2004 Nokia Corporation Page 26 Issue 1 07/04...
View of XRF-1 DAU-9S MBUS Cable (Product Code: 0730108) The MBUS cable DAU-9S has a modular connector, and is used with be tween PC's serial port and e.g. module jig. View of DAU-9S 2004 Nokia Corporation Issue 1 07/04 Page 27...
The DC cable SCB-3 is used to connect e.g. JVB-1 to the phone. View of SCB-3 XCS-4 Modular Cable (Product Code: 073017) XCS-4 is a shielded cable (one specially shielded conductor) modular cable for flashing and service purposes. View of XCS-4 2004 Nokia Corporation Page 28 Issue 1 07/04...
Company Confidential Service Tools Nokia Customer Care DAU-9T Service Cable (Product Code: 0730267) Pop-Port to D9 connector service cable, used for testing correct operation of phone and XPress-on Funshell. View of DAU-9T 2004 Nokia Corporation Page 30 Issue 1 07/04...