Table of Contents
Advertisement
Steps
1. Align and place the base cover on the chassis, and snap the base cover into place.
2. Tighten the seven captive screws to secure the base cover to the chassis.
Next steps
1. Exit the
service
mode.
2. Install the microSD-card.
3. Follow the procedure in
Solid-state drive
Removing the M.2 2230 solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Enter the
service
mode.
4. Remove the
base
cover.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
17
Advertisement
Table of Contents
