Advertisement
Quick Links
WEEE Disassembly Instructions
EU2SPE
EU2SPE WEEE Disassembly Instructions
302-004-114
REV 01
July 2017
This document provides clear guidance for end-of-life recyclers on how to identify and
disassemble reportable materials in compliance with the Waste Electrical and Electronic
Equipment (WEEE) directive. The document does not replace disposal instructions in
contracts, or those included in Product and Residuals Disposal Guidelines. It contains
the following sections:
purpose..................................................................................................2
documentation...........................................................................................2
Acronyms................................................................................................................2
identification............................................................................................. 3
information.................................................................................. 4
materials.................................................................................................. 5
product......................................................................................6
(PCBs).................................................................................6
Advertisement
Related Manuals for Dell EU2SPE
Summary of Contents for Dell EU2SPE
-
Page 1: Table Of Contents
WEEE Disassembly Instructions EU2SPE EU2SPE WEEE Disassembly Instructions 302-004-114 REV 01 July 2017 This document provides clear guidance for end-of-life recyclers on how to identify and disassemble reportable materials in compliance with the Waste Electrical and Electronic Equipment (WEEE) directive. The document does not replace disposal instructions in contracts, or those included in Product and Residuals Disposal Guidelines. -
Page 2: Document Purpose
Chlorofluorocarbons Central Processing Unit Cr Vl Hexavalent Chromium Copper Disk Array enclosure DIMMs Dual in-line Memory Modules Disk Processor Enclosure Device Regulatory Label Electromagnetic Interference Electrostatic discharge European Union Global Warming Potential Hydrocarbons HCFC Hydrochlorofluorocarbons Mercury EU2SPE WEEE Disassembly Instructions... -
Page 3: Product Identification
Locate the product regulatory model name on the Device Rating Label (DRL) affixed to a rectangular recess on the top of the product chassis. Table 2 Product Regulatory Model Name and Specifications Product EU2SPE Regulatory Model Name Product 2U, Disk Processor Enclosure (DPE) that supports 12, 3.5"... -
Page 4: Product Material Information
Brominated compounds in combination with antimony compounds 16 aromatic Brominated compounds (excluding Brominated diphenyl ether and biphenyls) 17 aromatic Brominated compounds (excluding Brominated diphenyl ether and biphenyls) in combination with antimony compounds 22 aliphatic/alicyclic chlorinated and EU2SPE WEEE Disassembly Instructions... -
Page 5: Locating Materials
Does not use capacitors with PCB Electrolyte capacitors Electrolytic capacitors (height and/or diameter greater than 25mm) (height > 25mm, are not used on Dell motherboards. However, these capacitors are diameter > 25mm) often present in power supply units (silver box) Asbestos and its... -
Page 6: Printed Circuit Boards (Pcbs)
Always use the tool specified in the removal procedures; Follow standard industry best practices, including all applicable health and safety regulations. Disassembly sequence Disassemble the product according to the following disassembly sequence. 1. Remove Power supplies (2) EU2SPE WEEE Disassembly Instructions... - Page 7 WEEE Disassembly Instructions 2. Remove I/O assemblies (varies according to configuration) 3. Remove 3.5" disk drives (12) 4. Remove 2.5" disk drive 5. Remove Storage processor 6. Remove Fans (6) 7. Remove DIMMs (varies according to configuration) 8. Disassemble SP: a.
- Page 8 1. From the rear of the chassis, pull the handle on the I/O assembly handle to release it. The ejector button should release. 2. Pull the assembly from the chassis. 3. Place the I/O assembly on a clean, ESD-protected surface. EU2SPE WEEE Disassembly Instructions...
- Page 9 WEEE Disassembly Instructions Remove a 3.5" disk drive Procedure 1. Attach an ESD wristband to your wrist and the enclosure. 2. Slide the disk's latch button the right to release the latch. 3. Rotate the latch outward (1) and slowly pull the disk from its slot (2). Place the disk on a padded, static-free surface.
- Page 10 WEEE Disassembly Instructions 2. Remove the 2.5" disk drive cover. 3. Slide the disk's orange release button downward to release it from its slot (1). The latch will rotate outward (2). EU2SPE WEEE Disassembly Instructions...
- Page 11 WEEE Disassembly Instructions Figure 2 Sliding the 2.5" disk drive orange release button down 4. Grasp the latch and pull the disk from its slot to remove it. Remove a storage processor This procedure describes how to remove a storage processor. Procedure 1.
- Page 12 Remove the DIMMs one at a time from the current storage processor and install them in the same location on the replacement storage processor. c. When the last DIMM has been moved, replace the air duct in the replacement storage processor. EU2SPE WEEE Disassembly Instructions...
- Page 13 WEEE Disassembly Instructions Remove a fan This procedure describes how to remove a fan. Before you begin The SP must be removed from the chassis to remove the fans. Procedure 1. Identify the failed fan. The SP fault LED, located at the bottom left rear of the chassis, will show an amber color if there is a fan failure.
- Page 14 1. Attach an ESD grounding strap to your wrist and to the instrument that is being worked on. 2. Press the tabs of the DIMM slot out to remove the DIMM. 3. Remove the DIMM from the slot. EU2SPE WEEE Disassembly Instructions...
- Page 15 WEEE Disassembly Instructions Disassemble SPS assembly Procedure 1. Remove four screws securing the SLIC cage lever handle to the chassis. 2. Pull up on the SLIC cage lever handle. Pull the SLIC cage forward and remove the SLIC cage. 3. Remove eight screws from the side of the chassis (four each side) and remove the fan cage.
- Page 16 FITNESS FOR A PARTICULAR PURPOSE. USE, COPYING, AND DISTRIBUTION OF ANY DELL SOFTWARE DESCRIBED IN THIS PUBLICATION REQUIRES AN APPLICABLE SOFTWARE LICENSE. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property of their respective owners. Published in the USA.