Installing The Cpu Fan And Heatsink Assembly; Installing A Dimm - Asus P3 Series Installation Manual

Desktop barebone

Hide thumbs Also See for P3 Series:

Table of Contents

Available languages

Installing the CPU fan and heatsink assembly

Installing an Intel

Place the heatsink on top of the installed

CPU, making sure that the four fasteners

match the holes on the motherboard.

Push down two fasteners at a time in a

diagonal sequence to secure the heatsink

and fan assembly in place.

When the fan and heatsink assembly is in

place, connect the CPU fan cable to the

connector on the motherboard.

NOTE: Your boxed CPU should come with installation instructions for the CPU and fan/

heatsink assembly. If the instructions in this section do not match the CPU documentation,

follow the latter.

CAUTION: Do not forget to connect the CPU fan connector! Hardware monitoring error

can occur if you fail to plug this connector.

Locate the DIMM sockets in the motherboard.

Unlock a DIMM socket by pressing the retaining clips outward.

Align a DIMM on the socket such that the notch on the DIMM matches the

break on the socket.

Push the DIMM to the socket until the retaining clips snap inward.

CAUTION:

•

Unplug the power supply before adding or removing DIMMs. Failure to do so may

cause damage to the motherboard and/or components.

•

A DIMM is keyed with a notch so that it fits in only one direction. Do not force

a DIMM into a socket to avoid damaging the DIMM.

CPU heatsink and fan

Installation manual

Table of Contents