Page 2
The EASTWOOD ELITE BEAD ROLLER FENCE is specifically designed to fit the Eastwood Elite 27” Bead Roller to create precise, perfectly straight line beads and offsets in metal panels up to 40” wide. Quick and easy to install, adjust and remove.
• Save for future reference. PINCH AND CRUSH HAZARD! • The Eastwood Elite Bead Roller Fence consists of metal components which can present a hand/finger pinch hazard. Avoid pinching hands while han- dling and keep fingers and hands away from moving parts when operating.
Page 4
• Loosen the Adjustable Handle Bolt Lock Screw and the Roller Tensioning Adjustable Handle Screw to raise the Upper Shaft fully then lock it in place. FIG. 2 Lock Roller Tensioner Lock Screw Raise Up Lower Bearing Block Bolt Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
Page 5
20-1/2” Max. (Fig 6) and adjust by turning the Bolts in and out slightly as needed. FIG. 5 Tighten all bolts firmly with a 16mm wrench after squareness is achieved. FIG. 6 90° To order parts and supplies: 800.343.9353 >> eastwood.com...
Use the Bead Roller normally while keeping the edge of the metal panel against the face of the Fence with an even pressure (FIG 7) which will produce a consistently straight bead or offset parallel to the edge of the metal panel. FIG. 7 Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
Page 7
NOTES To order parts and supplies: 800.343.9353 >> eastwood.com...
Eastwood 24” Slip Roll If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/21328manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.343.9353 Outside US: 610.718.8335...