Sony STR-DH540 Service Manual page 2
Multi channel av receiver
Hide thumbs
Also See for STR-DH540:
- Operating instructions manual (80 pages) ,
- Quick setup manual (2 pages) ,
- Limited warranty (1 page)
Table of Contents
Advertisement
STR-DH540
Ver. 1.1
1)
Measured under the following conditions:
Area
Power requirements
US, CND
120 V AC, 60 Hz
AEP, UK, AUS
230 V AC, 50 Hz
2)
Reference power output for front, center and surround speakers.
Depending on the sound field settings and the source, there may be no
sound output.
Frequency response
Analog
10 Hz – 100 kHz, +0.5/–2 dB (with
sound fi eld and equalizer bypassed)
Input
Analog
Sensitivity: 500 mV/50 kilohms
S/N
Digital (Coaxial)
Impedance: 75 ohms
S/N: 100 dB (A, 20 kHz LPF)
Digital (Optical)
S/N: 100 dB (A, 20 kHz LPF)
Output (Analog)
SUBWOOFER
Voltage: 2 V/1 kilohm
Equalizer
Gain levels
±10 dB, 1 dB step
INPUT SHORT (with sound field and equalizer bypassed).
3)
4)
Weighted network, input level.
FM tuner section
Tuning range
87.5 MHz – 108.0 MHz
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
AM tuner section
Tuning range
Area
Tuning scale
10 kHz step
US, CND
530 kHz –
1,710 kHz
AEP, UK, AUS
Antenna (aerial)
Loop antenna (aerial)
Video section
Inputs/Outputs
Video:
1 Vp-p, 75 ohms
iPod/iPhone section
DC 5V 1.0 A MAX
USB section
Supported format*
MP3 (MPEG 1 Audio Layer-3): 32 kbps – 320 kbps, VBR
WMA:
48 kbps – 192 kbps
AAC:
48 kbps – 320 kbps
WAV:
8 kHz – 48 kHz 16 bit PCM
* Compatibility with all encoding/writing software, recording devices and
recording media cannot be guaranteed.
Transfer speed
Full-speed
Supported USB device
Mass Storage Class
Maximum current
500 mA
2
3)
4)
: 105 dB (A, 500 mV
)
9 kHz step
531 kHz –
1,710 kHz
–
531 kHz –
1,602 kHz
General
Power requirements
Area
Power requirements
US, CND
120 V AC, 60 Hz
AEP, UK
230 V AC, 50/60 Hz
AUS
230 V AC, 50 Hz
Power consumption
200 W
Power consumption (during standby mode)
0.3 W (When "Control for HDMI" and
"Pass Through" are set to "Off".)
Dimensions (width/height/depth) (Approx.)
430 mm × 156 mm × 329.4 mm
(17 in × 6
projecting parts and controls
Mass (Approx.)
7.7 kg (16 lb 16 oz)
Design and specifications are subject to change without notice.
Supplied accessories
• Operating Instructions
• Quick Setup Guide (1)
• Remote control (RM-AAU168) (1)
• R6 (size AA) batteries (2)
• FM wire antenna (aerial) (1)
• AM loop antenna (aerial) (1)
• Optimizer microphone (ECM-AC2) (1)
Design and specifications are subject to change without notice.
• Halogenated flame retardants are not used in the certain
printed wiring boards.
Abbreviation
AUS : Australian model
CND : Canadian model
in × 13 in) including
1/4
Hide quick links:
Advertisement
Table of Contents
