Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear protective
instruction
gloves
manual
1. SAFETY
i
WARNING! Ensure Health & Safety, and local authority regulations are adhered to when assembling and using this racking system.
‰
Locate the racking in a suitable area where it will not be an obstruction.
9
Keep the general area clean, uncluttered and ensure there is adequate lighting.
9
WARNING! Use the racking on a level and solid surface such as concrete.
‰
Keep children and unauthorised persons away from the storage area.
9
DO NOT use the racking for any purpose other than that for which they are designed.
8
DO NOT get the racking wet or use in damp or wet locations or areas where there is condensation.
8
DO NOT clean the cross beams with any solvents which may damage the coated surface.
8
DO NOT overload the racking.
8
DO NOT allow others to ride on the racking.
8
DO NOT push loaded racking over edges, rough surfaces etc. as the whole unit may overturn.
8
Ensure that the racking is properly assembled before loading with heavy tyres.
9
Maximum load for each level is 200kg. Load must be evenly distributed.
9
Place heavier items on the lower racks.
9
Maintain correct balance and footing when moving the racking and ensure that the floor surface is not slippery.
9
Where possible heavier items should be evenly distributed across the racks.
9
2. INTRODUCTION
Two level mobile tyre rack helps keep working area clear. Unit is on wheels for easy manoeuvrability when needing to take the tyres
to point of work, ideal for use track side. Steel construction with a powder coated finish giving corrosion resistance. Stores up to twelve
tyres, six per level, with a total capacity of 400kg (200kg/Level).
3. SPECIFICATION
Model no.: ................................................................ STR007
Overall size (W x D x H) ........................915 x 455 x 1700mm
Capacity ................................................. 400 kg (200kg/level)
4. CONTENTS
Carefully unpack the product and check the contents (fig.1) against the list below. Should any items be missing or damaged, immediately
contact your Sealey stockist.
Part
Description
A
Upright
B
Horizontal Brace
C
Diagonal Brace
D
Spacer
E
Castor*
F
Bolt M6 x 50mm
G
Nut M6
H
Safety Bolt M6 x 20mm
I
Cross Beam
J
Bolt M10 x 20mm
K
Nut M10 and Spring Washer
* 2 x Swivel Castors and 2 x Fixed Castors
© Jack Sealey Limited
TWO LEVEL MOBILE TYRE RACKING
200KG CAPACITY PER LEVEL
MODEL NO:
Wear
safety footwear
Qty
4
8
4
4
4
14
26
12
6
16
16
Original Language Version
STR007
fig.1
STR007
Issue 1
10/07/19
Advertisement
Related Manuals for Sealey STR007
Summary of Contents for Sealey STR007
- Page 1 STR007 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 (H) and M6 nut (G). fig.3 fig.2 Original Language Version STR007 Issue 1 10/07/19 © Jack Sealey Limited...
- Page 3 Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505.