Page 1
[eHELP] (Built-in Operating Instructions). How to use [eHELP] (p. 18) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. Please carefully read the “Safety Precautions” of this manual before use.
For information about the trademarks, refer to [eHELP] (Support > Licence). The illustration for TX-40DSW504 is used in this manual unless otherwise mentioned. Illustrations shown may be different depending on the model. Contents Be Sure to Read Important Notice··················································· 3 Safety Precautions ···············································...
Panasonic has no authority to and does not grant you that permission and explicitly disclaims any right, ability or intention to obtain such permission on your behalf.
If you detect anything unusual, Do not use an unapproved pedestal / mounting immediately remove the mains equipment. Be sure to ask your local Panasonic plug. dealer to perform the setup or installation of approved wall-hanging brackets. This TV is designed to operate on AC...
Page 5
TV. Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic dealer immediately. (cm) During setup, make sure that all screws are securely tightened.
Page 6
LED TV Declaration of Conformity (DoC) “Hereby, Panasonic Corporation declares that this TV is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC.” If you want to get a copy of the original DoC of this TV, please visit the following website: http://www.ptc.panasonic.eu/doc...
Accessories Operating Instructions Pan European Guarantee Card Remote Control Accessories may not be placed all together. Take care (p. 14) not to throw them away unintentionally. N2QAYB001009 TX-32DSW504 Assembling / Removing the pedestal TX-40DSW504 TX-49DSW504 32-inch model TX-55DSW504 Assembly screw (3) N2QAYB001010 TX-32DSW504S M3 ×...
Page 8
Assembling the pedestal 40-inch model Assembly screw (4) M5 × 10 Assembly screw (4) M4 × 12 Bracket (2) Base English...
Page 9
49-inch model 55-inch model Assembly screw (4) M5 × 15 Assembly screw (4) M4 × 12 Bracket (2) Base 49-inch model 55-inch model Assembling the pedestal Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the 1 Remove the assembly screws from the TV.
6 Satellite terminal (p. 11) Connections 7 Terrestrial / cable terminal (p. 10) 8 AV2 (COMPONENT / VIDEO) (p. 12) 9 ETHERNET terminal (p. 12) External equipment and cables shown are not supplied with this TV. 10 AV1 (SCART) (p. 11) Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any Basic connections...
Page 11
network condition and broadcast. Satellite dish For information about the connections, read the manual of the DVB-via-IP server. DVB-S For details, refer to [eHELP] (Functions > DVB-via- IP). AV devices DVD Recorder / VCR Satellite cable Satellite dish To ensure your satellite dish is correctly installed, please consult your local dealer.
Page 12
Network Camcorder / Game equipment (VIDEO equipment) A broadband network environment is required to be able to use internet services. If you do not have any broadband network services, please consult your retailer for assistance. Prepare the internet environment for wired connection or wireless connection.
Page 13
Normally encrypted channels will appear. (Viewable channels and their features depend on the CI module.) If encrypted channels do not appear [Common Interface] in the Setup Menu There might be some CI modules in the market with older firmware versions that do not work fully interoperable with this new CI+ v1.3 TV.
Adjust using the slide bar How to Use Menu Sharpness Moved Functions change store Various menu items allow you to make settings for the picture, sound, and other functions. Go to the next screen Child Lock Display the menu access Displays the functions that can be set (varies according to the input signal).
Sound Changing Picture Display the menu and select [Sound] and Sound settings select Sound access Picture Display the menu and select [Picture] Select [Mode] select select Picture access access Select the sound mode Select [Viewing Mode] select You can select your favourite mode for each input. [Standard]: access Provides the suitable sound quality for all types of...
Retuning from Setup Set [Search Mode] / [Scan Mode] After settings, select [Start scan]. Menu A confirmation screen is displayed and press the OK button to start Auto Automatically retunes the channels received in the area. Setup (Settings are made automatically) This function is available if channel tuning is already performed.
Tuning and Editing DVB-via-IP Channels Select DVB-via-IP You can retune channels, edit channel lists, create your Display the menu and select [Setup] favourite channel lists, etc. For details, refer to [eHELP] (Watching > Tuning and select editing channels). Setup access Select the mode Select [DVB-via-IP Tuning Menu] select...
To sort channel names in alphabetical order (red) How to change the code To jump to the head of the next channel / input group Each Panasonic product has its own remote control (blue) code. Change the code according to the product for operation.
Viewing Teletext Enter the appropriate code, see table below Change Teletext services are the text information provided by the broadcaster. Type of the equipment, features Code The features may vary depending on the broadcaster. DVD Recorder, DVD Player, For details, refer to [eHELP] (Watching > Teletext). Blu-ray Disc Player TOP mode (For TOP text broadcasting) Player theatre, Blu-ray Disc...
Using TV Guide Select the page Coloured buttons TV Guide - Electronic Programme Guide (EPG) provides (Corresponds to the colour an on-screen listing of the programmes currently bar) broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcaster). Watch TV and teletext in two windows at When this TV is turned on for the first time, or the once...
To check / change / cancel a timer event (p. 28) USB HDD Recording To return to TV You can record the digital TV programmes to the connected USB HDD and enjoy playing back in various ways. For details, refer to [eHELP] (Recording). Preparation Prepare the USB HDD for the exclusive use of recording with this TV.
Page 27
To operate [REW LIVE TV] select To pause start setup Follow the on-screen instructions. To search backward (up to 90 minutes) Recording After pausing or searching backward, the following buttons are available for operation. Display the menu and select [Setup] Search backward select Playback / Pause...
Timer Programming Timer Programming Wed 21.10.2015 10:46 Function Channel Name Date Start Wed 21.10.2015 7 BBC7 STTL 17:00 18:30 Reminder <TIMER> (90 min.) This function allows you to select programmes that you USB HDD Rec. Wed 21.10.2015 18:00 20:00 BBC ONE Red Cap want to be reminded to watch or record to the USB (120 min.)
Example: [APPS List] Using Media Player select access Media Player allows you to enjoy photo, video or music recorded on the USB Flash Memory / network device, and content recorded with this TV to the formatted USB HDD. For details, refer to [eHELP] (Media Player). Select the device Photo mode: Still pictures recorded with digital cameras are...
Hub / Router Using Home Network DLNA Certified media server (PC, etc.) DLNA Network settings ® This TV is a DLNA Certified™ product. Ensure the connections are completed before starting Network Setup. DLNA (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network.
Page 31
name of another TV from the displayed media server list. To display / hide information of the highlighted media server Select the file select access Depending on the condition of media server, you may need to select the folder before selecting the file. To display / hide information of the highlighted file Note Non-playable files are also listed but cannot be...
When pushed with a finger, the display panel moves FAQs slightly and makes a noise There is a little gap around the panel to prevent damage to the panel. This is not a malfunction. Before requesting service or assistance, please follow these simple guides to solve the problem.
Maintenance Specifications First, remove the mains plug from the mains socket. Model No. : TX-32DSW504, TX-32DSW504S 32-inch model Display panel, Cabinet, Pedestal : TX-40DSW504, TX-40DSW504S 40-inch model Regular care: : TX-49DSW504, TX-49DSW504S 49-inch model Gently wipe the surface of the display panel, cabinet, : TX-55DSW504 55-inch model or pedestal by using a soft cloth to remove dirt or...
Page 34
PAL B, G, H, I Connection terminals SECAM B, G AV1 input / output SECAM L, L’ SCART (Audio/Video in, Audio/Video out, RGB in) VHF E2 - E12 VHF A - H (ITALY) AV2 input (COMPONENT / VIDEO) CATV (S01 - S05) VIDEO CATV S11 - S20 (U1 - U10) RCA PIN Type ×...
Page 35
When using the wall-hanging bracket To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use. Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket. Holes for wall-hanging bracket installation...