hit counter script
D-Link DSS-24 User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Switch
  5. DSS-24+
  6. User manual
D-Link DSS-24 User Manual

D-Link DSS-24 User Manual

Auto negotiation switch
Hide thumbs Also See for DSS-24:
Table of Contents

Advertisement

Quick Links

DSS-24 Auto Negotiation Switch User's
Guide
Rev. 02 (Oct, 2004)
651DS24..K15
i

Advertisement

Table of Contents
loading

Related Manuals for D-Link DSS-24

Summary of Contents for D-Link DSS-24

  • Page 1 DSS-24 Auto Negotiation Switch User’s Guide Rev. 02 (Oct, 2004) 651DS24..K15...
  • Page 2 The one-year period of warranty on complete products (or such longer period of warranty as may be offered as to your purchase) applies on condition that the product’s Registration Card is filled out and returned to a D-Link office within ninety (90) days of purchase. A list of D- Link offices is provided at the back of this manual, together with a copy of the Registration Card.
  • Page 3 No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as stipulated by the United States Copyright Act of 1976.

  • Page 4: Wichtige Sicherheitshinweise

    Wichtige Sicherheitshinweise Bitte lesen Sie sich diese Hinweise sorgfältig durch. Heben Sie diese Anleitung für den spätern Gebrauch auf. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. Um eine Beschädigung des Gerätes zu vermeiden sollten Sie nur Zubehörteile verwenden, die vom Hersteller zugelassen sind.

  • Page 5: Table Of Contents

    Copper Cable ... 12 ... 15 ORTS RS-232 Port... 15 MDI-II Uplink Port... 15 MDI-X Ports... 15 ... 16 LEDS ... 16 ... 18 MANAGING THE DSS-24 ... 18 ... 19 ANEL ONVENTIONS ... 20 ANELS ... 21 ONFIGURATION XAMPLES ...
  • Page 6 APPENDIX A ... 25 DSS-24 TECHNICAL SPECIFICATIONS ... 25 Switch Specifications ... 25 Port Specifications... 25 INDEX ... 29...

  • Page 7: About This Guide

    DSS-24 on a network. Refer to other sources for information about networking in general. All the information you need to install the DSS-24 is contained in this user guide. Organization Chapter 1, Introduction, gives and physical a functional overview of the DSS-24.

  • Page 8: Introduction

    The chapter is divided into several sections. Each section describes the features of the DSS-24. Many of the topics covered will be dealt with in more detail later in the manual.

  • Page 9: Front Panel

    The DSS-24 is designed for management at a glance. The LEDs on the front panel of the DSS-24 allow you to monitor performance at a glance. It is not necessary to connect to the DSS-24 in order to check performance or verify that a port is working.

  • Page 10: Side Panels

    DSS-24 10/100 Auto Negotiation Switch User’s Guide Side Panel There are two fans. The fans come on when the DSS-24 is powered on. The three holes on each side of the DSS-24 are used to attach the mounting brackets. There are heat vents located on the side opposite the fans. The fans and the heat vents help to cool the DSS-24.

  • Page 11: Management

    The only way of changing the default settings is through a physical connection with an RS- 232 cable. The DSS-24 does not have an IP address. It can not be monitored using SNMP and RMON. Introduction...

  • Page 12: Installing The Dss-24

    Unpacking the DSS-24 Installation options and instructions Powering on the DSS-24 Unpacking the DSS-24 Open the box and carefully unpack the DSS-24. You should have all the items on the following checklist: DSS-24 10/100 Auto Negotiation Switch RS-232 DCE serial cable...

  • Page 13: Installation Options

    Crimpers to crimp cable as needed. RJ-45 connectors as needed. Desktop/Shelf Installation The dimensions of the DSS-24 are: 441 mm (17.44 inches) x 235 mm (9.25 inches) 63 mm (2.44 inches). The measurements include the 8 mm (.31 inch) rubber feet.
  • Page 14 DSS-24 10/100 Auto Negotiation Switch User’s Guide Figure 4: Install Feet on Bottom Figure 5: Attach Feet Installing the DSS-16 and DSS-24...

  • Page 15: Rack Installation

    DSS-24 10/100 Auto Negotiation Switch User’s Guide Rack Installation The DSS-24 can be mounted in an EIA standard size 19 inch rack. The dimensions are: 441 mm (17.44 inches) x 235 mm (10.03 inches) x 55 mm (2.16 inches), 1.25 U. DSS-24 can be placed in a wiring closet along with other equipment.
  • Page 16 DSS-24 10/100 Auto Negotiation Switch User’s Guide Figure 7: Insert into Rack Installing the DSS-16 and DSS-24...

  • Page 17: Power On

    24 may be plugged in without having any or with all LAN segment cables connected. The power plug is located at the rear of the DSS-24. Plug the cable into the wall socket and plug the other end into the DSS-24. There is no on/off switch. The DSS-24 powers on when you plug the power cord into the three pronged power connector.

  • Page 18: Network Connections

    Crossover cable has a different pin arrangement at each end. Fast Ethernet does not tolerate incorrect pin arrangements. You must use the correct pin arrangement in order for the DSS-24 to work properly. See Figure 8 for an example of straight through and crossover cable.
  • Page 19 DSS-24 10/100 Auto Negotiation Switch User’s Guide Table 1: Cable Specifications Ethernet Type 10BASE-T 100-TX Network Connections Cable Requirements Category 3, 4, 5 UTP or Category 5 UTP or STP Maximum Length 100 m (328 feet) 100 m (328 feet)
  • Page 20 DSS-24 10/100 Auto Negotiation Switch User’s Guide Figure 8: Cable Diagram Network Connections...

  • Page 21: Ports

    The MDI-II Uplink port allows you to use a straight through cable when connecting another switch to the DSS-24. If the MDI-II Uplink port is in use, you must use a crossover cable when connecting another switch or other device that requires a crossover connection, to the DSS-24.

  • Page 22: Leds

    DSS-24 10/100 Auto Negotiation Switch User’s Guide The LED panel of the DSS-24, displayed in Figure 9, is designed to give you critical information at a glance. The LEDs indicate the following: Power Link Activity Collision Speed All LEDs are described in detail. See Table 2: Per Port LEDs, to determine the meaning of each LED.
  • Page 23 DSS-24 10/100 Auto Negotiation Switch User’s Guide Power Link Collision Link/ 100Mbps/ 10Mbps Link/ Collision 100Mbps/ 10Mbps 100Mbps/ 10Mbps Figure 9: DSS-24 LED Panel Table 2: Per Port LEDs Dark (Off) Link/ Act/ No Link Collision 100Mbps/ Port is running...

  • Page 24: Managing The Dss-24

    The connection times out after five minutes. Press Enter to reestablish the connection. This setting cannot be changed or disabled. If you have not done anything on the DSS-24 for more than five minutes, it will time out. Press Enter one time to refresh the screen.

  • Page 25: Panel Conventions

    DSS-24 10/100 Auto Negotiation Switch User’s Guide Panel Conventions The following panel conventions are used on the DSS-24: The Arrow and Tab keys can be used to select items. The Spacebar is used to toggle to different settings. The Backspace key allows you to move backwards through the panels.

  • Page 26: Panels

    DSS-24 10/100 Auto Negotiation Switch User’s Guide Panels Each panel of the DSS-24 covers eight ports. You will have either two or three panels. There are no other menus or panels available. Each panel has four columns: Port, Physical, Flow Control and Link Status.

  • Page 27: Configuration Examples

    Configuration Examples The following figures give examples of possible configurations. The figures are examples. They are intended to illustrate the functions of the DSS-24. The settings displayed on your switch may be different. Remember that the DSS-24 is an unmanaged switch. The DSS-24 can be connected to the network with no configuration and it will automatically negotiate all speed and duplex settings.
  • Page 28 DSS-24 10/100 Auto Negotiation Switch User’s Guide Ports 1 and 2 have been connected to the network. The DSS-24 has auto negotiated the proper speed and duplex mode, displayed in Figure 11. No further configuration is necessary. Figure 11: Auto Negotiation The speed and duplex mode on port 1 has been manually set.

  • Page 29: Troubleshooting

    Check the LEDs on the DSS-24 to verify settings. The port settings on the DSS-24 and the port settings on the device you are connecting to must be the same in order for them to communicate. Check the speed and duplex setting on both the port and the device you are connecting to.
  • Page 30 DSS-24 10/100 Auto Negotiation Switch User’s Guide default value is that all ports auto negotiate the proper speed and duplex mode. If the port has been manually configured for a particular speed and duplex mode, verify that the speed and duplex mode of the port match the speed and duplex mode of the device you are connecting to.

  • Page 31: Appendix A

    DSS-24 10/100 Auto Negotiation Switch User’s Guide DSS-24 Technical Specifications Switch Specifications Complies with IEEE 802.3 CSMA/CD 10BASE-T Ethernet Complies with IEEE 802.3u 100BASE-TX Fast Ethernet NWAY Auto-negotiation for each 10/100-TX network port providing auto-detection of connected cable types, auto-sensing of full and half duplex signaling and auto-configuration IEEE 802.3x compliant Full Duplex Flow Control...
  • Page 32 DSS-24 10/100 Auto Negotiation Switch User’s Guide Standards: Protocol: Data Transfer Rate: Topology: Network Cables: Number of Ports: (depending on model) Appendix A General IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100-TX Fast Ethernet ANSI/IEEE Std 802.3 NWAY™ Auto Negotiation IEEE 802.3 Frame types: Transparent IEEE 802.3 MAC layer frame size: 64-1518...
  • Page 33 DSS-24 10/100 Auto Negotiation Switch User’s Guide Physical and Environmental AC inputs: Maximum Power Consumption: DC fans: Operating Temperature: Storage Temperature: Humidity: Dimensions: Weight: EMI: Safety: Appendix A 100 – 240 VAC, 50/60 Hz (internal universal power supply) 33 watts...
  • Page 34 DSS-24 10/100 Auto Negotiation Switch User’s Guide Transmission Method: RAM Buffer: Filtering Address Table: Packet Filtering/ Forwarding Rate: Appendix A Performance Store-and-Forward 1.5 M bytes per device 8 K entries per device 148810 pps per port (for 100 Mbps)

  • Page 35: Index

    100Mbps/ 10Mbps...16 Configuration Examples ...21 dimensions...7 features ...2 Flow Control...20 front panel...3 installation ...7 link ...16 Link Status...20 management...5 MDI-X port...15 Index Panel Conventions ... 19 Panels... 20 Physical... 20 Port ... 20 ports ... 15 power ... 16 rear panel... 4 RS-232 port...

Table of Contents