hit counter script
Download Print this page
D-Link DSL-100D Quick Install Manual
D-Link DSL-100D Quick Install Manual

D-Link DSL-100D Quick Install Manual

Pci adsl modem
Hide thumbs Also See for DSL-100D:

Advertisement

Quick Links

®
D-Link
DSL-100D/CZ
PCI ADSL Modem
Quick Install Guide
1

Advertisement

loading

Summary of Contents for D-Link DSL-100D

  • Page 1 ® D-Link DSL-100D/CZ PCI ADSL Modem Quick Install Guide...
  • Page 2: Before You Begin

    This guide is for installation only. For more detailed information regarding the product and its features, please refer to the user manual located on the included CD-Rom. Before you begin: 1. If you have had a service technician install your DSL Line, please skip to Step 1 “Review Package Contents.”...
  • Page 3 Sharing your phone jack with the modem and another device. If you would like to share your phone jack with the modem and your phone, then use a standard 2-line adapter. Install the 2-line adapter into the wall jack. Plug the RJ-11 cable into one adapter jack.
  • Page 4 Installing the “Z-Blocker” filter on a wall-mounted telephone, using the wall-mount filter. Remove the phone. On some phone you must pull out a locking lever before removing the phone. Then push up on the phone and pull it out from the wall. Slide the filter locking tabs (located at the top and bottom on the front of the filter) to the UNLOCKED position.
  • Page 5 Plug the filter directly into the wall jack using only the attached short cord. If this cannot be done, then use a twisted-pair cable like the data cable for the modem (i.e., NOT a flat phone cord) to connect the filter to the wall jack.
  • Page 6 Disconnect its power, and remove its case. (Follow your PC manufacturer’s instructions to prevent damage or injury.) Place the DSL-100D/CZ into an available PCI slot. Replace the cover and POWER ON your computer. DSL-100D/CZ Driver Installation At boot up, Windows will recognize t DSL-100D/CZ modem and prompt for drivers.
  • Page 7 DSL-100D/CZ Driver Installation Continued… At the following screen, make sure that “Search for the best driver for your device…” is selected. Click Next. At this window, check “Specify a location.” Click Browse. In the Browse for Folder window, please highlight the folder that corresponds to both your Operating System.
  • Page 8 DSL-100D/CZ Driver Installation Continued… After you have selected the correct folder, Click Next. Once the correct version of the drivers are found, Click Next. If this screen appears, p lace your Windows Operat System CD into your CD drive. Click OK.
  • Page 9 DSL-100D/CZ Driver Installation Continued… Click Yes and the computer will restart automatically. DSL-100D/CZ Modem Configuration Right click on this icon, pictured above, located in the lower right hand corner of your computer screen, in the systray box. Select “Configuration.”...
  • Page 10 DSL-100D/CZ Driver Installation Continued… In the configuration window, make sure that PVC Setup is selected to ADSL Service Provider. The default ADSL Mode is set to ANSI T1.413 Issue 2. Remove the Check Mark from ANSI T1.413 Issue 2. Check ITU G.992.1 Annex A (G.dmt)
  • Page 11 DSL-100D/CZ Driver Installation Continued… To make changes to your VPI and VCI Settings, Your setup should look like the window on the right with these settings. VPI: 0 VCI: 35 Protocol: 2364 (PPPoA) Framing: VC MUX If changes were made in the Edit...
  • Page 12 DSL-100D/CZ Logging On Continued… The “Connect To” windows will show. Enter User name and Password. Click Connect. You can now access the Internet using your DSL-100D/CZ ADSL modem! Setting up Dial-Up Networks Go to Start > Programs > Accessories >...
  • Page 13 DSL-100D/CZ Setting up Dial-Up Networks Continued… Enter “0” in the telephone number section. Click Next. Click Finish After “My Connection” setup is configured, go to Start > Programs > Accessories > Communications > Dial-Up Networking. There, you will see an icon that says “My Connection.”...
  • Page 14 DSL-100D/CZ Setting up Dial-Up Networks Continued… The “Connect To” windows w show. Enter User name and Password. Click Connect. You can now access the Internet using your DSL-100D/CZ ADSL modem!
  • Page 15 NOTES...
  • Page 16 ® D-Link DIGITAL HOME SOLUTIONS Printed in Taiwan Version 2.0...

This manual is also suitable for:

Dsl-100d/cz