Table of Contents
Advertisement
v Voltage: 48 V DC max
v Current: 25 mA max
v Power: 1.2 W
Replacing the communication card
About this task
Follow these steps to replace the UPS Network Management Card.
32
Installation and User's Guide
1. Turn off the UPS.
1
2. Disconnect the network cable.
3. Remove the connector panel blank (
which is secured by two screws.
4. Insert the UPS Network Management
Card into the slot.
5. Secure the panel by tightening the two
screws.
),
- Quick Links:
- Battery Pack Replacement
Hide quick links:
Advertisement
Table of Contents
