Advertisement
Quick Links
s
Combination Starters, Classes 17, 18, 25, 26 and 32
Starter Sizes 0 - 4
Replacement Parts and Instruction Guide
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS IN
EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET IN
CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD
FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE
WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER'S PURPOSES, THE
MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.
THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF OR
MODIFY ANY PRIOR OR EXISTING AGREEMENT, COMMITMENT OR RELATIONSHIP.
THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE
WARRANTY CONTAINED IN THE CONTRACT BETWEEN PARTIES IS THE SOLE
WARRANTY OF SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE
NEW WARRANTIES OR MODIFY THE EXISTING WARRANTY
Siemens Industry, Inc. 3617 Parkway Ln, Peachtree Corners, GA 30092 www.usa.siemens.com
IMPORTANT
.
E87010-A0137-T003-A4
Hazardous voltage.
Will cause death, serious personal injury,
or property damage.
Always de-energize and ground the equipment before
maintenance. Read and understand this manual before
installing, operating or maintaining the equipment.
Maintenance should be performed only by qualified
personnel. The use of unauthorized parts in the repair of
the equipment or tampering by unqualified personnel may
result in dangerous conditions which may cause death or
serious personal injury or equipment or property damage.
Follow all safety instructions contained herein.
Short-Circuit Explosion Hazard. Can cause death, serious
personal injury, or property damage. Fully engage all
door latches and spread ends of door hinge pins
approximately 45 degrees before energizing equipment.
SIGNAL WORDS
The signal words "Danger","Warning" and "Caution"
used in this manual indicate the degree of hazard that
may be encountered by the user.
These words are defined as below:
Danger - Indicates death, severe personal injury or
property damage will result if proper
precautions are not taken.
Warning - Indicates death, severe personal injury, or
property damage can result if proper
precautions are not taken.
Caution - Indicates personal injury or property
damage may result if proper precautions
are not taken.
QUALIFIED PERSON
For the purpose of this manual and product labels a
qualified person is one who is familiar with the installa-
tion, construction, operation, or maintenance of the
equipment and the hazards involved. In addition this
person has the following qualifications:
(a) is trained and authorized to energize,
de-energize, clear, ground, and tag circuits
and equipment in accordance with established
safety practices.
(b) is trained in the proper care and use of
protective equipment such as rubber gloves,
hard hat, safety glasses or face shields, flash
clothing, etc., in accordance with established
safety practices.
(c) is trained in rendering first aid.
August 2020
Supersedes Issue of
June 2015
A5E31166526A-003
Advertisement
Related Manuals for Siemens 17
Summary of Contents for Siemens 17
- Page 1 flash clothing, etc., in accordance with established safety practices. (c) is trained in rendering first aid. Siemens Industry, Inc. 3617 Parkway Ln, Peachtree Corners, GA 30092 www.usa.siemens.com A5E31166526A-003...
-
Page 2: Replacement Parts
ED63A050 ED63A100 ED63A125 FXD63A150L * Type 4X stainless steel only. Does not include fiberglass type enclosures. ** For installation instructions see pages 7 & 8. E and F Siemens Industry, Inc. 3617 Parkway Ln, Peachtree Corners, GA 30092 www.usa.siemens.com A5E31166526A-003... - Page 3 KT_ _ 150 is 150VA (with primary fusing) Enclosure Type Catalog Number 1, 3R, 12 75D46260004 4, 4X 75D46260005 J. Overload Relay Reset Operator Enclosure Type Catalog Number 49MBRS1 3R, 4, 4X, 12 49MBRS2 Siemens Industry, Inc. 3617 Parkway Ln, Peachtree Corners, GA 30092 www.usa.siemens.com A5E31166526A-003...
-
Page 4: Instruction Guide
10. Verify that the door cannot be opened with the handle in Hardware has been provided to mount a new disconnect the ‘ON’ position. switch if necessary. Siemens Industry, Inc. 3617 Parkway Ln, Peachtree Corners, GA 30092 www.usa.siemens.com A5E31166526A-003... - Page 5 ‘ON’ position. Hardware has been provided to mount a new circuit breaker if necessary. * Diagram applies to size 3.5 or 4 starters with E or F frame breaker Siemens Industry, Inc. 3617 Parkway Ln, Peachtree Corners, GA 30092 www.usa.siemens.com A5E31166526A-003...
- Page 6 Verify that the door cannot be opened with the handle in removed to access the mounting screws. the ‘ON’ position. * Diagram applies to size 3.5 or 4 starters with E or F frame breaker Siemens Industry, Inc. 3617 Parkway Ln, Peachtree Corners, GA 30092 www.usa.siemens.com A5E31166526A-003...