Table of Contents
Advertisement
OWNER'S MANUAL
LAUNDRY CENTER
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that the
product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
ENGLISH
WK22**S6
MFL71728958
Rev.05_041421
Copyright © 2020-2021 LG Electronics Inc. All Rights Reserved.
www.lg.com
Advertisement
Table of Contents
Related Manuals for LG WK2 S6 Series
Summary of Contents for LG WK2 S6 Series
- Page 1 This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference. ENGLISH WK22**S6 www.lg.com MFL71728958 Rev.05_041421 Copyright © 2020-2021 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
Adding Detergents and Softeners ..............36 Control Panel and Programme Table............38 Extra Options and Functions ................44 OPERATION-DRYER Operation Overview..................46 Preparing the Laundry ..................46 Control Panel and Programme Table............48 Extra Options and Functions ................53 SMART FUNCTIONS Using LG ThinQ Application................56 Smart Diagnosis ....................58... - Page 3 MAINTENANCE Washer ......................60 Dryer ........................63 TROUBLESHOOTING Washer ......................65 Dryer ........................72 Common......................78...
-
Page 4: Safety Instructions
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. Safety Messages This symbol is displayed to indicate matters and operations that can cause risk. - Page 5 SAFETY INSTRUCTIONS WARNING: FIRE OR EXPLOSION HAZARD Failure to follow safety warnings exactly could result in serious injury, death or property damage. • Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. •...
-
Page 6: Warning
SAFETY INSTRUCTIONS WARNING - Risk of Fire Install the clothes dryer according to the manufacturer’s instructions and local codes. • Clothes dryer installation must be performed by a qualified installer. • Do not install a clothes dryer with flexible plastic venting materials. - Page 7 SAFETY INSTRUCTIONS • Use a new hose or hose-set supplied with the appliance. Reusing old hoses can cause a water leak and subsequent property damage. • Ventilation openings must not be obstructed by a carpet. • Do not dry unwashed items in the appliance. •...
- Page 8 SAFETY INSTRUCTIONS Leaving clothes that has been dried in the appliance unattended could result in fire. Clothes not removed from the appliance after drying could result in fire. Remove clothes immediately after drying, and then hang or lay the clothes flat to cool. •...
- Page 9 SAFETY INSTRUCTIONS service personnel if you are in doubt as to whether the appliance is properly grounded. • This appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the appliance, in such a way that a full opening of the appliance door is restricted.
- Page 10 • Do not touch the door during a high temperature programme. • In case of a water leak from the appliance or flood, disconnect the power plug and contact the LG Electronics customer information centre. • Turn off water taps to relieve pressure on hoses and valves and to minimize leakage if a break or rupture should occur.
- Page 11 • Only qualified service personnel from LG Electronics service centre should disassemble, repair, or modify the appliance. Contact an LG Electronics customer information centre if you move and install the appliance in a different location.
-
Page 12: Installation Parts And Specifications
INSTALLATION INSTALLATION Parts and Specifications NOTE • Appearance and specifications may change without notice to improve the quality of the appliance. Front View Washer Door Magnet Drain Hose Drain Pump Filter Drain Pump Filter Cover Leveling Feet Rear View Control Panel Lint Filter Dryer Drum Dryer Door... - Page 13 INSTALLATION malfunction, property damage or bodily injury Terminal Block Access Panel (for Electric caused by the use of separately purchased Models) unauthorized components, parts, or non-LG Cold Water Inlet products. Exhaust Duct Outlet Gas connection (for Gas Models) Hot and Cold Water Inlets...
- Page 14 INSTALLATION Specifications Model WK22**S6 Power supply 120 V~ 60 Hz Dimensions (Width X Depth X Height) 700 mm X 770 mm X 1890 mm Product weight 142 kg Washing : 22 kg Max. capacity Drying : 11 kg (Dry Clothes) / 22 kg (Wet Clothes) Maximum Power 1320 W (washing) / 400 W (drying) Permissible Inlet Water pressure...
-
Page 15: Installation Place Requirements
INSTALLATION Installation Place Dimensions and Clearances Requirements 10 cm Before installing the appliance, check the following 2.5 cm information to make sure that the appliance should be installed in a correct place. 70 cm Flooring 189 cm • To minimize noise and vibration, install the 2.5 cm washer on a level, solidly constructed floor capable of supporting the appliance without... - Page 16 NOTE • No other fuel-burning appliance can be installed in the same closet as an appliance. • You can purchase rubber cups (part No. 4620ER4002B) from the LG service centre. Wooden Floors (Suspended Electrical Connection Floors) • Do not use an extension cord or double adapter.
-
Page 17: Unpacking The Appliance
Contact your local Starting with the bottom two transit bolts authorised LG repairer. use the spanner (included) to fully loosen all • The power plug must be plugged into an transit bolts by turning them counterclockwise. -
Page 18: Connecting Electric Dryer
INSTALLATION Connecting Electric Dryer • Do not modify the plug and internal wire provided with the dryer. • The dryer should be connected to a 4-hole outlet. WARNING • If the plug does not fit the outlet, a proper outlet •... - Page 19 INSTALLATION Thread a 30-amp, 240-volt, 4-wire, UL-listed Hot Leads of Power Cord (Black and Red) power cord with #10 AWG-minimum copper Neutral Wire (White) conductor through the strain relief. Power Cord Ground Wire Ground Screw (green) Four-Wire Direct Wire • A UL-listed strain relief is required.
- Page 20 INSTALLATION Thread the 4-wire #10 AWG minimum copper Neutral Wire (White) power cable prepared in step 1 through the Power Cord Ground Wire strain relief. Ground Screw (green) Three-Wire Power Cord • A 3-wire connection is NOT permitted on new construction after January 1, 1996.
- Page 21 INSTALLATION Attach the neutral (white) wire to the center Bend the ends of the three wires into a hook terminal block screw. shape. 1’’ (2.5 cm) Connect the external ground (if required by local codes) to the green ground screw. Tighten all screws securely.
-
Page 22: Installing The Vent Kit Of Dryer
3.8 cm to connect the • An adapter kit, part number 383EEL9001B, may remaining ductwork. Attach the cover plate be purchased from your LG retailer. This kit to the back of the dryer with the included contains duct components necessary to change screw. -
Page 23: Venting The Dryer
INSTALLATION Venting the Dryer • If connecting to existing ductwork, make sure it is suitable and clean before installing the dryer. • Venting must conform to local building codes. WARNING • Use only 10 cm rigid, semi-rigid or flexible metal •... -
Page 24: Connecting Gas Dryer
INSTALLATION NOTE • Deduct 1.8 m for each additional elbow. Do not use more than four 90° elbows. Connecting Gas Dryer Routing and Connecting Ductwork WARNING Follow the guidelines below to maximize drying performance and reduce lint buildup and • To reduce the risk of fire or explosion, electric condensation in the ductwork. - Page 25 INSTALLATION • DO NOT use an open flame to inspect for gas WARNING leaks. Use a noncorrosive leak detection fluid. • DO NOT use old connectors. • Gas pressure must not exceed 20.4 cm water column for NG, or 33.1 cm water column for LP. •...
-
Page 26: Connecting The Water Supply Hose
INSTALLATION that the curved end of the water supply hose is NOTE connected to the appliance. • If necessary, the correct nozzle (for the LP nozzle kit, order part number 383EEL3002D) should be installed by a qualified technician and the change should be noted on the dryer. - Page 27 INSTALLATION Push the adapter onto the end of the tap so watertight. Tighten the 4 fixing screws and the that the rubber seal is connected to be adapter ring plate. watertight. Tighten the 4 fixing screws. Pull the connector latch plate down, push Push the inlet hose vertically upwards so...
-
Page 28: Installing The Drain Hose
INSTALLATION Attach the inlet hoses to the back of the microorganisms could spread to the inside appliance and secure the cold water inlet hoses of the washer. with tie straps For the Washer • Attach the hot water inlet hose to the hot water inlet on the back of the washer. -
Page 29: Levelling The Appliance
INSTALLATION Levelling the Appliance Using the Laundry Tub to Drain Checking the Level Clip the end of the hose into the elbow bracket. • Connect the elbow bracket within 10 cm When pushing down the edges of the top plate of the end of the drain hose. - Page 30 Incorrect levelling may cause malfunction through stand or elevated surface unless it is noise and vibration. If this occurs, install the anti- manufactured by LG Electronics for use with this slip sheets under the levelling feet and adjust the model.
- Page 31 INSTALLATION NOTE • Additional anti-slip sheets are available at LG Electronics service centre.
-
Page 32: Disassembly
INSTALLATION Disassembly Pull the control panel forward to remove it. Disassembling the Washer and Dryer The washer and dryer cannot be disassembled and installed for use side by side. If it is necessary to disassemble the appliance in order to move or reinstall it, follow these instructions. - Page 33 INSTALLATION Lift the dryer and separate it from the washer. WARNING • Protect your hands and arms from sharp edges of the panel frame exposed on the top of the washer. • To avoid strain injuries, use 2 or more people to lift the dryer.
-
Page 34: Operation-Washer Operation Overview
OPERATION-WASHER OPERATION-WASHER Operation Overview CAUTION Using the Washer • Remove items from the flexible door seal gasket to prevent clothing and door seal damage. Before the first wash, select the Normal wash programme and add a half amount of the detergent. -
Page 35: Preparing The Wash Load
OPERATION-WASHER • When the cycle is finished, a melody will Symbol Wash / Fabric type sound. Immediately remove your clothing from the appliance to reduce wrinkling. • Do not wash Preparing the Wash Load NOTE • The dashes under the symbol give you Sorting the Clothes information about the type of fabric and the maximum allowance of mechanical stress. -
Page 36: Adding Detergents And Softeners
OPERATION-WASHER Adding Detergents and NOTE Softeners • Do not let the detergent harden. Doing so may lead to blockages, poor rinse performance or Detergent Dosage odour. • Full load: According to manufacturer’s • Detergent should be used according to the recommendation. - Page 37 OPERATION-WASHER Adding Detergent Tablets Fabric Softener Compartment This compartment holds liquid fabric softener, Detergent tablets can also be used when washing. which is automatically dispensed during the final rinse cycle. Either powdered or liquid fabric Open the door and put detergent tablets into softener may be used.
-
Page 38: Control Panel And Programme Table
• To use the extra functions, press and hold the corresponding button for 3 seconds. The corresponding symbol lights up in the display. Remote Start With the LG ThinQ app, you can use a smartphone to control your appliance remotely. • In order to use this function, refer to SMART FUNCTIONS. Wi-Fi Press and hold the Temp. - Page 39 Beep sound can be turned on or off only through the LG ThinQ application.
- Page 40 OPERATION-WASHER Washing Programme Turn the knob or press the button to select the desired cycle. When you select a wash cycle, the light for the corresponding wash cycle will turn on. NOTE • Whenever load weights are mentioned, assume 1 lb (0.45 kg) = 1 thick bath towel (dry). •...
- Page 41 Use a smartphone to download a specialized cycle to this cycle position. • The default cycle is Enjuague+Centrifugado (Rinse+Spin). This cycle is also available for download. • Refer to the LG ThinQ application to see the cycles available for download. Wash Temp. Default: Cool...
- Page 42 OPERATION-WASHER Cycle Ciclo Descargado (Enjuague+Centrifugado) (Downloaded (Rinse+Spin)) Soil Level Default: - Available: -...
- Page 43 OPERATION-WASHER Selectable Washing Options *1 This option is automatically included in the cycle and cannot be deselected. NOTE • If the Turbo Wash option is on, you cannot set the spin level to No Cent. (No Spin). Enjuague Extra Prelavado (Pre Cycle Steam Turbo Wash...
-
Page 44: Extra Options And Functions
OPERATION-WASHER Extra Options and Select a washing programme. Functions Customize the washing programme (Temp., Centrifugado (Spin), and Suciedad (Soil)) as Customizing a Washing necessary. Programme Each programme has default settings that are Press the Start/Pause button. selected automatically. You may also customize these settings using these buttons. - Page 45 OPERATION-WASHER Change the washing programme (Temp., NOTE Centrifugado (Spin) or Suciedad (Soil)) as necessary. • Once this function is set, all buttons are locked except the Power button. Press the Steam or Turbo Wash button. • When the controls are locked, and the remaining time are alternatively shown on the display during the wash while this function is...
-
Page 46: Operation-Dryer Operation Overview
OPERATION-DRYER OPERATION-DRYER Operation Overview time of being paused, the dryer will shut off and the settings will be lost. Using the Dryer End of programme Clean the Lint Filter. • When the programme is finished, the chime • If the lint filter has not already been cleaned, will sound. - Page 47 OPERATION-DRYER Checking the Fabric Care Label • Make sure to empty all pockets. Items such as nails, hair clips, matches, pens, coins and keys can damage both your appliance and clothes. The symbols on the fabric care label tell you about the fabric content of your clothes and how it should •...
-
Page 48: Control Panel And Programme Table
• Use these buttons to select the desired options for the selected programme. Not all options are available in each programme. Remote Start • With the LG ThinQ app, you can use a smartphone to control your appliance remotely. • In order to use the Remote Start function, refer to SMART FUNCTIONS. Wi-Fi •... - Page 49 This time will change when you set the extra options for the programme. • Error messages will appear when the appliance diagnose problems. lights up when the beep is on. This function can be turned on or off only through the LG ThinQ application.
- Page 50 OPERATION-DRYER Description lights up while the Flow Sense duct blockage sensing system detects and alerts you to blockages in the ductwork that reduce exhaust flow from the dryer. Maintaining a clean exhaust system improves operating efficiency and helps minimize service calls, saving you money.
- Page 51 Use a smartphone to download a specialized programme to this programme position. • The default programme is Planchado permanente (Perm. Press). This programme is also available for download. • Refer to the LG ThinQ application to see the programmes available for download. Temp. Default: Medium...
- Page 52 OPERATION-DRYER Selectable Drying Options *1 This option is automatically included in the programme and can be deselected. NOTE • The Ahorro de Energía (Energy Saver) option is set to on by default. If you turn on the dryer and set the Ahorro de Energía (Energy Saver) option to off, the Ahorro de Energía (Energy Saver) option is turned off when you turn on the dryer.
-
Page 53: Extra Options And Functions
OPERATION-DRYER Extra Options and Select a drying programme. Functions Customize the drying programme (Temp., Nivel de Secado (Dry Level), and Tiempo de Customizing a Drying Secado (Time Dry)) as necessary. Programme Each programme has default settings that are Hold the Start/Pause button. selected automatically. - Page 54 OPERATION-DRYER Follow the next steps to use a special • Press and hold the Steam button for 3 seconds before you start a drying programme. option. NOTE Press the Power button. • Steam may not be clearly visible during the steam programmes.
- Page 55 OPERATION-DRYER Press and hold the Tiempo de Secado (Time Dry) button for 3 seconds to deactivate this function. Señal (Signal) The dryer plays a melody when the dry programme is finished. The buttons make a sound each time a button is pressed. Use this button to turn the melody and button tones on or off.
-
Page 56: Smart Functions
LG ThinQ application and connect it again. • Remote Start • This information is current at the time of - Control the appliance remotely from the LG publication. The application is subject to change ThinQ application. for product improvement purposes without •... - Page 57 You can also monitor your cycle operation so you know how much time is left in the • LG ThinQ is not responsible for any network connection problems or any faults, cycle. malfunctions, or errors caused by network Using this function connection.
-
Page 58: Smart Diagnosis
Use this feature to help you diagnose and solve washing time. problems with your appliance. NOTE Start a cycle from the LG ThinQ application on your smartphone. • For reasons not attributable to LGE’s negligence, the service may not operate due to external... - Page 59 SMART FUNCTIONS Hold the mouthpiece of your phone in front of the appliance. • Washer: Hold the phone to the right of the Start/Pause button. • Dryer: Hold the phone to the left of the Power button. Press and hold the Steam + Enjuague Extra (Steam + Extra Rinse) (Washer) / Steam + Reducir Estática (Steam + Reduce Static) (Dryer) buttons for 3 seconds or until the...
-
Page 60: Maintenance
MAINTENANCE MAINTENANCE WARNING • Unplug the appliance before cleaning to avoid the risk of electric shock. Failure to follow this warning may result in serious injury, fire, electric shock, or death. • Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They may damage the finish. - Page 61 MAINTENANCE weeks in addition to the regularly prompted time (e.g. holiday), especially if there is no floor intervals. drain (gully) in the immediate vicinity. • error message will be displayed on the NOTE control panel when the water is not entering the detergent drawer.
- Page 62 MAINTENANCE Open the cover cap and pull out the drain tube. check for build-up of cleaning products once or twice a month. Remove the detergent dispenser drawer by pulling the drawer straight out until the drawer stops. • Then gently pull the drawer outward while pressing hard the disengage button.
-
Page 63: Dryer
MAINTENANCE Dryer for obstructions and blockages and contact a qualified technician or service provider. WARNING Cleaning the Lint Filter • Remove the power plug when you clean the appliance. Not removing the plug may result in Always clean the lint from the filter after every electric shock. - Page 64 MAINTENANCE If the lint filter has become very dirty or clogged with fabric softener, wash the lint filter in warm, soapy water and allow it to dry thoroughly before reinstalling. NOTE • NEVER operate the appliance without the lint filter in place.
-
Page 65: Troubleshooting
Operation of your appliance can lead to errors and malfunctions. The following tables contain possible causes and notes for resolving an error message or malfunction. It is recommended to read the tables carefully below in order to save your time and money that may cost for calling to LG Electronics service centre. - Page 66 • Close the door and make sure that nothing is caught under the door preventing it from closing completely. Door sensor malfunctions. • Close the door. Please call LG service centre. You can find your local LG service centre phone number in the warranty card. This is a control error.
- Page 67 TROUBLESHOOTING Symptoms Possible Cause & Solution Thumping sound Heavy clothes may produce a thumping sound. This is usually normal. • If the sound continues, the appliance is probably out of balance. Stop and redistribute the clothes. The clothes may be out of balance. •...
- Page 68 TROUBLESHOOTING Symptoms Possible Cause & Solution Appliance does not Control panel has powered off due to inactivity. operate. • This is normal. Press the Power button to turn the appliance on. Appliance is unplugged. • Make sure that the cord is plugged securely into a working outlet. Water supply is turned off.
- Page 69 TROUBLESHOOTING Symptoms Possible Cause & Solution Appliance is not filling Inlet filter clogged. properly. • Make sure the inlet filters on the fill valves are not clogged. Inlet hoses may be kinked. • Check that inlet hoses are not kinked or clogged. Insufficient water supply.
- Page 70 TROUBLESHOOTING Performance Symptoms Possible Cause & Solution Poor stain removal Previously set stains. • Articles that have been previously washed may have stains which have been set. These stains may be difficult to remove and may require hand washing or pre-treating to aid in stain removal. Staining Bleach or softener is dispensed too soon.
- Page 71 TROUBLESHOOTING Odour Symptoms Possible Cause & Solution Musty or mildewy Inside of drum is not cleaned properly. odour in appliance • Run the Limpieza de Tina (Tub Clean) function regularly. Odours can occur if the drain hose is not properly installed, causing siphoning (water flowing back inside of the appliance).
-
Page 72: Dryer
TROUBLESHOOTING Dryer Error Messages Symptoms Possible Cause & Solution Temperature sensor failure. through TEMPERATURE SENSOR • Turn off the appliance and call for service. ERROR Power cord is connected incorrectly. POWER ERROR • Check the connection of the power cord to the terminal block. The duct work is about 75% - 95% blocked. - Page 73 TROUBLESHOOTING Symptoms Possible Cause & Solution Clothes take too long Exhaust ducts are blocked, dirty, or duct run is too long. to dry. • Confirm that the exhaust duct is properly configured and free of debris, lint, and obstructions. Make sure that the outside wall damper can open properly and is not blocked, jammed, or clogged.
- Page 74 TROUBLESHOOTING Symptoms Possible Cause & Solution The appliance will not Power cord is not properly plugged in. turn on. • Make sure that the plug is securely plugged into a grounded outlet matching the appliance's rating plate. House fuse is blown, circuit breaker has tripped, or power outage has occurred.
- Page 75 TROUBLESHOOTING Symptoms Possible Cause & Solution Greasy or dirty spots Fabric softener used incorrectly. on clothes. • Check and follow the instructions provided with your fabric softener. Clean and dirty clothes are being dried together. • Use your dryer to dry only clean items. Soil from dirty clothes can transfer to the clean clothes in the same or later loads.
- Page 76 TROUBLESHOOTING Symptoms Possible Cause & Solution Excess static in clothes Fabric softener is not used or is used incorrectly. after drying. • Use a fabric softener or the Reducir Estática (Reduce Static) option, if available, to reduce static electricity. Be sure to follow the manufacturer’s instructions.
- Page 77 TROUBLESHOOTING Symptoms Possible Cause & Solution Steam is not visible This is normal. during Steam cycle. • Steam vapor is difficult to see when the door is closed. However, condensation will normally form on the inside of the dryer door if the steam system is operating normally.
-
Page 78: Common
• Find the Wi-Fi network connected to your smartphone and remove it, then not connected to the register your appliance on LG ThinQ. Wi-Fi network. Mobile data for your smartphone is turned on. • Turn off the Mobile data of your smartphone and register the appliance using the Wi-Fi network. - Page 79 Memo...