Table of contents Safety .......... 4 Etagere ........... 23 General information...... 4 Folding prongs ....... 23 Intended use........ 4 Knife shelf........ 23 Restriction on user group.... 4 Extra Clean Zone ...... 24 Safe installation ........ 5 Basket heights........ 25 Safe use ........... 6 Before using for the first time .. 25 Damaged appliance ...... 8 Performing the initial configura- Risk to children ........ 9...
Page 3
Customer Service...... 59 Starting the programme .... 34 Product number (E-Nr.), produc- Interrupting programme .... 34 tion number (FD) and consecut- Terminate programme.... 34 ive numbering (Z-Nr.) ..... 60 Switching off appliance .... 35 AQUA-STOP guarantee .... 60 Basic settings........ 36 Technical specifications.... 61 Overview of basic settings ..... 36 Information regarding Free and Changing basic settings.... 38...
en Safety Safety Please read the safety information to ensure that you use the ap- pliance safely. General information You can find general information for this instruction manual here. ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡...
Safety en Keep children under the age of 8 years away from the appliance and power cable. Safe installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of injury! Improper installation may cause injury. ▶ When installing and connecting the appliance, follow the in- structions in the manual and installation instructions.
en Safety WARNING ‒ Risk of fire! It is dangerous to use an extended power cord and non-ap- proved adapters. ▶ Do not use extension cables or multiple socket strips. ▶ If the power cord is too short, contact Customer Service. ▶ Only use adapters approved by the manufacturer. WARNING ‒ Risk of injury! Hinges move when opening and closing the appliance door and can cause injury.
Page 7
Safety en ¡ Highly caustic alkaline or highly acidic cleaning agents in con- junction with aluminium parts in the interior of the appliance may cause explosions. ▶ Never use highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial products, in conjunction with aluminium parts (e.g.
en Safety ¡ If the insulation of the power cord is damaged, this is danger- ous. ▶ Never let the power cord come into contact with hot appli- ance parts or heat sources. ▶ Never let the power cord come into contact with sharp points or edges.
Safety en Risk to children Follow the safety instructions if there are children in your home. WARNING ‒ Risk of suffocation! ¡ Children may put packaging material over their heads or wrap themselves up in it and suffocate. ▶ Keep packaging material away from children. ▶...
Page 10
en Safety WARNING ‒ Risk of injury! Children may get their fingers caught in the slots of the tablet collecting tray and injure themselves. ▶ Keep children away from the appliance when open. WARNING ‒ Risk of suffocation! Children may become trapped in the appliance and suffocate. ▶...
Preventing material damage en ¡ Modified or damaged water hoses Preventing material damage Preventing material dam- may result in material damage and damage to the appliance. Never kink, crush, modify or cut ▶ through water hoses. Follow these instructions to prevent Preventing material damage Only use the water hoses sup- material damage to your appliance,...
en Environmental protection and saving energy ¡ Unsuitable cleaning agents may Saving energy damage the appliance. If you follow these instructions, your Do not use a steam cleaner. ▶ appliance will use less electricity and So as not to scratch the finish ▶...
Installation and connection en ¡ Warranty Efficient Dry ¡ Installation material The appliance door opens automatic- ¡ Steam guard plate ally during the drying phase. This en- ¡ Mains cable sures a particularly economical dry- ¡ Quick reference guide ing result. For best drying results wait until the Installing and connecting the end of programme before unloading...
en Installation and connection Drainage connection Electrical connection Connect your appliance to drainage Connect your appliance to the power connection so dirty water is dis- supply. charged via the wash cycle. Connecting the appliance to the Installing the drainage connection electricity supply Consult the installation instructions Notes supplied for the steps required...
Familiarising yourself with your appliance en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarise yourself with the parts of your appliance. Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number"...
en Familiarising yourself with your appliance "Detergent" → Page 29 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 21 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 25 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket.
Page 17
Familiarising yourself with your appliance en 3 4 5 6 "Switching on the appliance" → Page 33 ON/OFF button and reset button "Switching off the appliance" → Page 35 "Terminating the programme" → Page 34 "Programmes" → Page 18 Programme buttons "Water softening system" → Page 25 Special salt refill indicator "Rinse aid system"...
en Programmes Programmes Programmes You can find an overview of the pro- ted. The running time will change if Programmes grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending...
en Additional functions Press the right programme button. Additional func- → "Programmes", Page 18 tion Press the button for the relevant ¡ Switch on with small additional function. loads. Half Load → "Additional functions", Page 20 ¡ It is recommended Press for approx. 3 seconds. adding less detergent a The selected programme and the to the detergent dis- additional function will flash.
Features en The basket can then slip down Top basket slightly. Arrange cups and glasses in the top Raise or lower the basket evenly to basket. the right level. → "Basket heights", Page 25 Knife shelf Check that the basket is level on You can adjust the height of the top both sides.
en Features 3rd basket Use the 3rd basket to wash large items of cutlery that are lightly soiled as well as small items of tableware, e.g. small cups, bowls or cooking spoons. Cutlery basket Arrange cutlery in the cutlery basket, always without sorting it and with the sharp points downwards.
Features en Push the lever forwards and fold Etagere down the prongs . Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. To use the prongs again, fold them back up.
en Features Note: Always operate the appliance Extra Clean Zone with the Extra Clean Zone fitted. Use the Extra Clean Zone in the top Pull out the top basket. basket to clean soiled tableware thor- Pull the tab on the Extra Clean oughly, e.g.
Before using for the first time en Basket heights Set the baskets at the right height. Level Top basket Bottom basket 1 max. ø 18.5 cm 27.5 cm 2 max. ø 21 cm 25 cm "Add rinse aid." → Page 28 Before using for the first time Before using for the "Switch on the appliance."...
en Water softening system Water hardness °E Hardness range mmol/l Setting value 16 - 20 Medium 2.2 - 2.9 21 - 26 Hard 3.0 - 3.7 27 - 38 Hard 3.8 - 5.4 39 - 62 Hard 5.5 - 8.9 Note: Set the water hardness determ- gramme starts.
Water softening system en To open the basic settings, press for 3 seconds. a The display shows Hxx. a The display shows . Press repeatedly until the dis- play shows H00. To save the settings, press for 3 seconds. a The water softening system is switched off and the salt refill indic- ator is deactivated.
en Rinse aid system The consumption values specified are laboratory measurements determ- ined in accordance with the currently applicable standard and using the Eco 50° programme and the factory value of the water hardness is set to 16 - 20°E. Rinse aid system Rinse aid system You can use the rinse aid system Rinse aid system...
Detergent en based bleaching agents are generally Switching the rinse aid sys- used to remove coloured marks, e.g. tem off tea or ketchup. If you find the rinse aid refill indicator Note: Follow the manufacturer's in- irritating, e.g. when using combined structions for each detergent. detergents with a rinse aid compon- Detergent Description...
en Detergent Separate detergents Unsuitable detergents Separate detergents are products Do not use detergent which could that do not contain components other cause damage to the appliance or than detergent, e.g. powder deter- present a risk to health. gent or liquid detergent. With powder and liquid detergent the Detergent Description...
Tableware en ¡ The function of rinse aid is limited with combined detergents. You will generally get better results using rinse aid. ¡ Use tablets with a special drying performance. Adding detergent To open the detergent dispenser, press the locking latch. Add the detergent to the dry deter- a The lid clicks into position.
en Tableware Damage to glass and table- Cause Recommendation ware The water temperat- Select a programme ure of the programme with lower temperat- Avoid damage to glass and table- is too high. ures. ware. After the programme has ended, take glass- Cause Recommendation ware and cutlery out...
Basic operation en To save resources, do not pre- Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin.
en Basic operation If you do not perform any actions Starting the programme on the appliance for 10 minutes, Press the appliance will automatically ▶ a The programme has ended when switch off. the display shows "0h:00m". Setting a programme Notes ¡...
Basic operation en Press for approx. 4 seconds. Close the appliance door. a All displays light up. a As soon as the displays are off, the display shows "0h:01m" and the residual water is pumped out. a The programme is cancelled and ends after approx.
en Basic settings Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07 Set the water softening system to your water hardness.
Page 37
Basic settings en Basic setting Display text Selection Description InfoLight I00 - I01 Switch InfoLight on or off. While the programme is running, a spot of light is projected onto the floor below the appliance door. This light will not be visible if the appli- ance is installed at eye level with the cabinet front fitted flush.
en Home Connect Basic setting Display text Selection Description Remote Start rc0 - rc2 Activate or deactivate → "Remote Start ", Page 39. The following settings are possible: ¡ With the setting "rc0", the func- tion is permanently deactivated. ¡ With the setting "rc1", the func- tion can be selected via the button.
Home Connect en Tips ¡ Please consult the documents sup- plied by Home Connect. ¡ Please also follow the instructions in the Home Connect app. Note: Please note the safety precau- tions in this instruction manual and make sure that they are also ob- Follow the instructions in the served when operating the appliance Home Connect app.
You can use this function to update the software of your appliance, e.g. Declaration of Conformity for optimisation, troubleshooting or safety-relevant updating. Robert Bosch Hausgeräte GmbH The Home Connect app informs you hereby declares that the appliance about available software updates. with Home Connect functionality...
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.bosch-home.com/ mend cleaning your appliance at reg- store or from customer service. ular intervals. Machine Care is a programme which...
en Cleaning and servicing Phase Removal of Detergent Placement Food remnants and deposits Machine cleaner Detergent dispenser To ensure optimum cleaning perform- Remove any coarse soiling in the ance, the programme doses the de- interior with a damp cloth. tergents independently of each an- Clean the filters.
Cleaning and servicing en Cleaning filters Soiling in the dishwashing water may block the filters. After each wash check the filters for residue. Turn the coarse filter anticlockwise and remove the filter system . Check that no foreign objects ‒ fall into the sump.
Page 44
en Cleaning and servicing Pull up the lower spray arm to re- move. Check the outlet nozzles on the spray arms for blockages under running water and remove any for- eign bodies. Insert the lower spray arm. a The spray arm clicks into position. Insert the upper spray arm and screw it firmly in place.
Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
en Troubleshooting Fault Cause troubleshooting Appliance door opens too Door is not correctly adjus- Adjust the appliance door as de- ▶ wide at the end of the pro- ted. scribed in the installation instruc- gramme. tions. The door gap must be at least 70 mm - 100 mm.
Page 47
Troubleshooting en Fault Cause troubleshooting E:32-00 will light up altern- ately or indicator for water supply lights up. Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks. Restore the power supply. Switch the appliance on.
en Troubleshooting Fault Cause troubleshooting A different error code ap- A technical fault is present. Press . pears in the display window. Unplug the appliance or switch off the fuse. E:01-00 to E:90-10 Wait at least 2 minutes. Insert the mains plug of the appli- ance in a socket or switch on the fuse.
Page 49
Troubleshooting en Fault Cause troubleshooting Tableware is not dry. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- Activate Extra Dry. ▶ prove drying performance. Tableware removed too Wait until the programme ends. early or drying process not Only remove tableware 30 minutes yet ended.
Page 50
en Troubleshooting Fault Cause troubleshooting Remnants of food on table- Tableware is placed too Arrange tableware with sufficient ware. close together or basket is space in between. overfilled. The spray jets must reach the sur- faces of the tableware. Avoid points of contact. Spray arm rotation is Arrange tableware so that it does ▶...
Page 51
Troubleshooting en Fault Cause troubleshooting Detergent residue in the ap- Tabs are used in the quick Select a more intensive "Pro- ▶ gramme" → Page 18 or use pliance or short programme. Dissolv- "Powder detergent" → Page 29. ing time of the tab is not at- tained.
Page 52
en Troubleshooting Fault Cause troubleshooting Stubborn white coatings are Too little detergent is being Increase the amount of detergent ▶ present on tableware, inside used. used or change "Detergent " → Page 29. the appliance or the door. Washing programme selec- Select a more intensive washing ▶...
Page 53
Troubleshooting en Fault Cause troubleshooting Coloured deposits (yellow, The formation of films is due Check the setting of the water orange, brown) that are easy to ingredients of food rem- softening system. to remove are present inside nants and tap water (limes- Add special salt.
Page 54
en Troubleshooting Fault Cause troubleshooting Irreversible clouding of Glasses are not dishwasher- Use dishwasher-proof glasses. ▶ glassware. proof, only suitable for dish- Glasses are usually only suitable for washers. use in a dishwasher, i.e. long-term wear or long-term changes must be expected.
Troubleshooting en Home Connect problem Fault Cause troubleshooting Connection to home net- WLAN on router is not act- Check the wireless network con- ▶ work is not established. ive. nection of your router. WLAN display is flashing. Connection to home net- Activate the wireless network con- ▶...
en Troubleshooting Fault Cause troubleshooting Water is left in the appliance Programme has not yet Wait until the programme ends or ▶ at the end of the pro- ended. cancel the programme with Reset. gramme. → "Terminate programme", ▶ Page 34 Appliance cannot be Software update is taking Wait until the software update has ▶...
Troubleshooting en Fault Cause troubleshooting Appliance door cannot be Door cannot be closed due Check whether the appliance has ▶ closed. to installation method. been installed properly. When closed, the appliance door, its decor or attached parts should not knock against adjacent cabin- ets or the worktop.
en Transportation, storage and disposal Clean wastewater pump Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. WARNING Risk of injury! Sharp and pointed objects or frag- ments of glass may block the waste a The pump cover clicks into posi-...
Customer Service en Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely.
en Customer Service We will always find an appropriate Product number (E-Nr.), pro- solution and try to avoid unnecessary duction number (FD) and con- visits being made by a Customer Ser- secutive numbering (Z-Nr.) vice technician. With any warranty claims, we will You can find the product number (E- make sure that your appliance is re- Nr.), the production number (FD) and...
Technical specifications en needs to be turned off if you are Capacity 13 place settings away from home for a long period, More information about your model e.g. on holiday for several weeks. can be found online at https://en- ergylabel.bsh-group.com . This web address is linked to the official EU Technical specifications Technical specifications...
Page 62
en Technical specifications Reference "OSSREQUEST" The cost of performing your request will be charged to you. This offer is valid three years from the date of pur- chase or at least as long as we offer support and spare parts for the re- spective appliance.
Page 64
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.