Removing the Memory Modules
1. Perform the
"Removing the Back
2. Push out the latches on both sides of the memory slot until the module tilts upward.
Figure 3-18. Memory Module Latches
3. Remove the memory module from the slot.
Figure 3-19. Memory Modules
NOTE:
NOTE:
A circuit board that is > 10cm
Figure
3-19. Follow the local regulations for disposing this type of circuit board.
4. Repeat Steps 2 & 3 to remove the remaining memory module.
Machine Maintenance
Cover" procedure described on page 3-12.
2
has been highlighted with a yellow rectangle in
0
3-17