Table of Contents Model FR-CN-0160-R / Model FR-CN-0260-R / Model FR-CN-0360-R Model FR-CN-0460-R / Model FR-CN-0560-R Section Page Disclaimer -------------------------------------------------------------------------------------------- 3 General Information --------------------------------------------------------------------------- 4 - 5 Safety and Warranty --------------------------------------------------------------------------- 5 - 7 Technical Specifications -------------------------------------------------------------------------- 7 Operation ----------------------------------------------------------------------------------------- 7 - 8...
Disclaimer OMCAN IS NOT RESPONSIBLE FOR ANY DAMAGES DUE TO WATER LEAKS. WARRANTY FOR WATER LEAKS IS VOID IF THE AMBIENT ROOM TEMPERATURE EXCEEDS 75°F AND 55% RELATIVE HUMIDITY, AND THE APPLIANCE DRAIN IS NOT CONNECTED DIRECTLY TO A FLOOR...
If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents.
Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia.
Page 6
1 YEAR PARTS AND LABOUR WARRANTY Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized service technician to repair the equipment locally. Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms. DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT! Technical Specifications Model FR-CN-0160-R FR-CN-0260-R FR-CN-0360-R FR-CN-0460-R FR-CN-0560-R Compressor HP...
Operation beverage with freezing point above the temperature in the cabinet when it is below zero. • For foods that should be moisture-free or lose water easily, wrap them up with hermetical food bags or fresh films before putting in the cabinet for the sake of avoiding smell-mixing and reducing frosting. •...
Page 9
Troubleshooting The compressor stops a minute The power voltage is >132V. Put a power-regulater more than after start, and restart after a few 1000W power together. minutes, and so repeatedly. The compressor works normally, The door is opened too frequently. Reduce open times.
Page 11
Parts Breakdown Model FR-CN-0260-R 46493...
Page 12
Parts Breakdown Model FR-CN-0360-R 46494...
Page 13
Parts Breakdown Model FR-CN-0460-R 46495...
Page 14
Parts Breakdown Model FR-CN-0560-R 46730...
Page 15
Parts Breakdown Model FR-CN-0160-R 46492 Item No. Description Position Item No. Description Position Item No. Description Position 69421 Upper Glass Door for 46492 28445 Caster with Lock for 46492 64768 Fan Motor Support for 46492 41162 Key/Lock for 46492 28449...
Page 16
Parts Breakdown Model FR-CN-0460-R 46495 Item No. Description Position Item No. Description Position Item No. Description Position AE120 Upper Glass Door for 46495 69431 Casters with Brakes for 46495 69438 Fan Motor Support for 46495 69426 Key for 46495 69432 Thermostat for 46495 69439 Casters without Brakes for 46495...
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d’avoir acheté...
Page 20
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers.