Page 1
LED TV ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. 32LT572MBUC ESPAÑOL Guía Rápida de Configuración 43LT572M0UC Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas.
Page 2
ENGLISH Read Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
Page 6
4.85 4,85 32LT572MBUC 43 W (29.0) (29,0) (17.3) (17,3) (3.3) (3,3) (10.6) (10,6) 80.8 80,8 43LT572M0UC 90 W (38.4) (38,4) (22.6) (22,6) (3.1) (3,1) (17.6) (17,6) AC 120 V ~ 50 / 60 Hz...
Important Safety Instruction • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. •...
Page 11
Warning! Safety instructions - Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit). - Near flammable objects such as gasoline CAUTION or candles, or expose the TV to direct air RISK OF ELECTRIC SHOCK...
Page 12
• Grounding (Except for devices which are not • Use only an authorized attachments / accessories grounded.) approved by LG Electronics. Otherwise, this may - TV with a three-prong grounded AC plug must be result in fire, electric shock, malfunction, or product connected to a three-prong grounded AC outlet.
Page 13
Preparing • To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power • When the TV is turned on for the first time after plug completely or wipe dust off.
Number of screws 4 Wall mount LSW140B LSW149 bracket(optional) • Use at least two people to move a large TV. 32LT572MBUC Model • When transporting the TV by hand, hold the TV as 43LT572M0UC shown in the following illustration. VESA (A x B)
• When transporting the TV, keep the TV upright; • Do not apply foreign substances (oils, never turn the TV on its side or tilt towards the left lubricants, etc.) to the screw parts when or right. assembling the product. (Doing so may •...
We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to • When mounting a TV on the wall, make sure connect the cables. When you do not use LG’s wall...
Connections • It is recommended that you use an external USB HDD with a rated voltage of 5 V of less and a rated You can connect various external devices to the TV. current of 500 mA or less. For more information on external device’s connection, refer to the manual provided with each device.
Network setup Method of volume control port (Depending upon model) (Depending upon model) • Cable Spec. Wired network connection Each Up / Down This TV can be connected to a Pro:Centric server pin is pulled to via the port. After making the physical 3.3 V with CPU connection, the TV needs to be set up for network GPIO.
1 Connect the Basic Functions port of the Modem or Router to port on the TV. <Type A> 2 Connect the port of the PC to the port on the TV. (Depending upon model) Power On (Press) • Do not connect a modular phone cable to the Power Off (Press and Hold) port.
TV. Some minute dot performance. The customer is responsible to ensure defects may be visible on the screen, appearing the compatibility of their equipment with any LG as tiny red, green, or blue spots. However, they Electronics software. If needed, please consult with have no adverse effect on the TV’s performance.
Page 21
• [Cinema] / [Game] Displays the optimum picture for • When cleaning the product, be careful not a movie or a game. to allow any liquid or foreign objects to • [Sports] Optimised picture mode for sports enter the gap between the upper, left or matches.
Specifications Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.). Broadcasting Specifications Television system ATSC, NTSC-M, 64 &...
HDMI (PC) supported mode My Media Supported Files (Use HDMI IN 1 for PC mode) * Maximum data transfer rate: 20 Mbps (Mega bit per Horizontal Vertical second) Resolution Frequency (kHz) Frequency (Hz) • External supported subtitle formats: *.srt, *.smi, 640 x 350 31.46 70.09 *.sub (Only for SubViewer 1.0/2.0), *.ass, *.ssa, *.txt...
USB Type (TV) (PC) (PC) (TV) • LG TV supports PL2303 chip-based (Vendor ID: 0 x 0557, Product ID: 0 x 2008) USB to serial converter which is not RS-232C IN (CONTROL & SERVICE) made nor provided by LG. (PC) (TV) •...
Page 26
RS-232C with RS-232C Cable (TV) (PC) DE9 (D-Sub 9pin) Type RS-232C IN (CONTROL & SERVICE) (TV) (PC) (PC) (TV) • You need to purchase the RS-232C (DE9, D-Sub 9 pin female-to-female type) to RS-232C cable required for the connection between the PC and the TV, which is specified in the manual. (PC) (TV) •...
Page 27
RS-232C configurations 7-Wire Configurations 3-Wire Configurations (Standard RS-232C cable) (Not standard) D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID * Remote control is not provided. * For Set ID number, see “Real data mapping (Hexadecimal: Decimal)”. 1 Press (Settings) to access the main menus.
Communication Parameters • Baud rate: 9600 bps (UART) • Stop bit: 1 bit • Data length: 8 bits • Communication code: ASCII code • Parity: None • Use a crossed (reverse) cable. Command reference list * (Depending upon model) COMMAND1 COMMAND2 DATA (Hexadecimal) 1 Power...
TRANSMISSION / RECEIVING PROTOCOL * It has only supported for 32/43LT572M*. Transmission (Command1)(Command2)( )([Set ID])( )(Data)(Cr) (Command 1): First command to control the TV. (j, k, m or x) (Command 2): Second command to control the TV. ([Set ID]): You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99.
Page 30
1 Power (Command: k a) * Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV ► To control power on or off of the set. partially. Transmission 3 Screen Mute (Command: k d) (k)(a)( )([Set ID])( )(Data)(Cr) ►...
Page 31
6 [Contrast] (Command: k g) 10 [Sharpness] (Command: k k) ► To adjust screen contrast. You can also adjust ► To adjust the screen sharpness. You can also adjust contrast in the picture settings. sharpness in the picture settings. Transmission Transmission (k)(g)( )([Set ID])( )(Data)(Cr) (k)(k)( )([Set ID])( )(Data)(Cr)
Page 32
13 [Treble] (Command: k r) 17 [Equalizer] (Command: j v) (Depending upon model) ► Adjust EQ of the set. ► To adjust treble. You can also adjust Treble in the Transmission audio settings. (j)(v)( )([Set ID])( )(Data)(Cr) Transmission (k)(r)( )([Set ID])( )(Data)(Cr) Data Min: 00 to Max: 64 (r)( )([Set ID])( )(OK/NG)(Data)(x) Frequency...
Page 33
19 Tune Command (Command: m a) 2 Tune to the digital antenna (DVB-T) Channel 01. * This command may work differently Depending [Set ID] = All = 00 upon model and signal. Data 00 & 01 = Channel Data is 1 = 00 01 * For Europe, Mid-East, Colombia, Asia except South Data 02 = Digital Antenna TV = 10 Korea and Japan Model...
Page 34
• Analog Antenna/Cable • Tune Command Examples: Data 00: Physical Channel Number 1 Tune to the Analog cable (NTSC) channel 35. - Antenna (ATV): 02~45 (Decimal: 2 ~ 69) [Set ID] = All = 00 - Cable (CATV): 01~87 (Decimal: 1~135) Data 00 = Channel Data is 35 = 23 Data 01 &...
Page 35
• Digital Antenna/Satellite 20 [Channel] Control (Command: m b) Data 00: xx (Don’t care) ► To skip current channel for next time. (Data 01)(Data 02): Major Channel Number Transmission Data 01: High byte Channel Data (m)(b)( )([Set ID])( )(Data)(Cr) Data 02: Low byte Channel Data Data 00: Del(ATSC,ISDB)/Skip(DVB) - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) Data 01: Add...
Page 36
23 Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission (x)(b)( )([Set ID])( )(Data)(Cr) Data 00: DTV Data 01: CADTV Data 02: Satellite DTV ISDB-BS (Japan) Data 03: ISDB-CS1 (Japan) Data 04: ISDB-CS2 (Japan) Data 10: ATV Data 11: CATV Data 20: AV or AV1...
Page 37
If not use the remote-controller with data formats recommended, IR output signals will be suppressed automatically by IR receiver. In this case, LG does not guarantee IR working function. To make sure of this matter, here are two methods as below.
Dolby Atmos, and the double-D symbol are available for download. trademarks of Dolby Laboratories. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
Regulatory FCC Radio Frequency Interference Requirements (for UNII devices) (For USA) FCC Notice High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. (For USA) These radar stations can cause interference with and/ This equipment has been tested and found to or damage this device.
Industry Canada Statement RSS-247 Requirement (For Canada) (For Canada) [For having wireless function (WLAN, Bluetooth,...)] [For product having the wireless function using 5 GHz frequency bands] This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and (1) The device for operation in the band 5150–5250 Economic Development Canada’s licence-exempt MHz is only for indoor use to reduce the potential for RSS(s).
NOTE TO CABLE/TV INSTALLER Symbols (For USA and Canada) Refers to alternating current(AC). This reminder is provided to call the CATV system Refers to direct current(DC). installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines Refers to class II equipment.
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Page 44
Supplier’s Declaration of Conformity Trade Name Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com LG Customer Information Center The model and serial number of the product are located on the back and on one side of the product.