Ports
Front
1 COPY indicator light
7 CONNECT button
Indicates the state of a USB device
Press this button to obtain a
or a memory card and the status of
permission code for adding a Data
data imported from the device or
Sync (receiving) profile.
card.
8 COPY button
2 NETSERVER indicator light
Press this button to import data
Indicates the server test status or
from a USB device or a memory
the state of the Home Server.
card.
3 1 (POWER) indicator light
9 SD (SD memory card) slot
Indicates the state of the power
Insert an SD memory card.
supply or the state of the Home
q;
(USB) port
Server.
Connect a USB mass storage
4 1 (POWER) button
class device, such as a digital still
Press this button to turn on and off
camera or a digital camcorder.
the Home Server.
This port is also labeled as Front
USB on the Home Server Settings
5 INFO indicator light
Page.
Indicates the state of the Home
qa Display
Server.
Displays information on the Home
6 HDD indicator light
Server.
Indicates the remaining capacity or
the state of the hard disk drive.
Back
1 Air vents
2 DC IN port
Connect to the AC adapter.
3 Network (LAN) port
4
(USB) port 1
Connect a network (LAN) cable.
Connect a USB mass storage
class device, such as a digital still
Note
camera or a digital camcorder.
This port is also labeled as Rear
Be sure not to connect any
USB1 on the Home Server Settings
unsupported networks or any
Page.
telephone lines to the Network
port.
qs DISPLAY button
Press this button to turn on the
display on the Home Server and
select the required information.
qd Memory Stick slot
Insert a "Memory Stick" media.
This slot can also accommodate
the Duo-type media without an
adapter.
qf OK button
Press this button to confirm the
information displayed on the
display.
qg CANCEL button
Press this button to cancel the on-
going operation. You can also
press and hold this button for 10
seconds to clear the administrator
registration and the IP address
settings.
qh MEMORY CARD access indicator
light
Blinks while access to the memory
card is in progress.
qj CF (CompactFlash) slot
qk CF (CompactFlash) media eject
button
ql Front door
To open the front door, put your
fingertip on the left end of the door
and slide it half way to the right. To
close the door, slide it half way to
the left.
w; ID label
Shows the model name of the
Home Server.
5
(USB) port 2
Connect a USB mass storage
class device, such as a digital still
camera or a digital camcorder.
This port is also labeled as Rear
USB2 on the Home Server Settings
Page.
4-121-976-01(1)
Getting to know your VGF-HS1 Home Server
The information provided here is designed to help you become familiar with your Home Server.
Note
Some of the above products may not be available, depending on the country or region of residency.
Unpacking
❑ Home Server
❑ Network (LAN) cable (straight-
through Ethernet cable, 2 m)
❑ Rear cover
❑ User Guide
❑ Setup Guide
❑ Quick Start Guide
❑ AC adapter
(this document)
❑ Warranty sheet or Guarantee
and Service Support booklet
(depending on the country or
region of residency)
❑ Power cord
© 2008 Sony Corporation / Printed in Japan
VGF-HS1 Series
Store
Share
❑ CD-ROM disc
• Software
– PC Link
– VAIO Media
• Contents
Sample contents
(also stored on your Home
Server at the time of delivery)