Page 1
Epson ® Quick Setup U npack the projector You should have the following items: Projector Projector remote control User’s Guide CD-ROM PowerLite Power cord Batteries Password protect sticker ® Computer cable Carrying case...
Computer/Component Video, S-Video, and Video.) • A computer cable is included. You can purchase optional video cables through Epson or at local electronics stores. See the next page for accessory information. • You can connect up to 3 video devices and use the remote control to switch between them.
Choosing a location The projector supports 4 viewing setups. Choose the best one for your environment. If you install the projector in a rear or overhead position, you’ll need to choose the correct projection option, identified below, from the Extended menu. See the User’s Guide on your CD-ROM for instructions.
The Power light turns orange. Press the You hear a beep, the Power light flashes green, and the projector lamp comes on in about 4 seconds. The Power light stays green. Start your video or presentation. If you have connected more than one video source, use the Source buttons on the remote control to select the one you want to watch.
Then, if necessary, press the buttons on the projector’s control panel until the image is corrected. If the projector cannot be placed directly in front of the screen, you can use the Image Shift feature to move the image over the screen. See your User’s Guide on the CD-ROM.
Select VGA Display or Color LCD, click Arrangement or Arrange, and click Mirror Displays. Epson is a registered trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks and Epson Store is a service mark of Epson America, Inc.