Table of Contents
Advertisement
.
D-ILA
PROJECTOR
DLA-NX9
DLA-NX7
DLA-NX5
.
http://manual3.jvckenwood.com/projector/mobile/global/
The Mobile User Guide can be viewed on mobile internet devices including
smartphones and tablets.
.
For Customer use :
Enter below the serial No. which is
located on the side of the cabinet.
Retain this information for future
reference.
DLA-NX9 K,
DLA-NX7 K,
Model No.
DLA-NX5 K,
Serial No.
.
Not suitable for household room illumination.
Mobile User Guide
Pour utilisation par le client :
Entrerci-dessous le N°de série qui
est situé sous le boîtier. Garder
cetteinformation comme référence
pour le futur.
DLA-NX9 K,
DLA-NX7 K,
N° de modèle
DLA-NX5 K,
N° de série
INSTRUCTIONS
Instrucción para el cliente :
Introduzca a continuación el nº de
serie que aparece en la parte
inferior lateral de la caja. Conserve
esta información como referencia
para uso ulterior.
DLA-NX9 K,
DLA-NX7 K,
Modelo Nº
DLA-NX5 K,
Nº de serie
B5A-2809-01
Advertisement
Chapters
Table of Contents
Related Manuals for JVC DLA-NX5
Summary of Contents for JVC DLA-NX5
- Page 1 DLA-NX9 K, DLA-NX9 K, DLA-NX9 K, DLA-NX7 K, DLA-NX7 K, DLA-NX7 K, Model No. N° de modèle Modelo Nº DLA-NX5 K, DLA-NX5 K, DLA-NX5 K, Serial No. N° de série Nº de serie Not suitable for household room illumination. B5A-2809-01...
-
Page 2: Safety Precautions
This product has a High Intensity CAUTION: Dis-charge (HID) lamp that contains mercury. Manage in accord with Changes or modification not approved by JVC could void the user’s authority to operate the equipment. disposal laws. NOTE: Disposal of these materials may be... - Page 3 IMPORTANT SAFEGUARDS Power source indicated on the label. If you are not sure of the type of power supply to your home, consult your Electrical energy can perform many useful functions. product dealer or local power company. This unit has been engineered and manufactured to This product is equipped with a three-wire plug.
- Page 4 For replacement, please consult your dealer, or the nearest Do not use optical instruments (such as magnifying glass or authorized JVC service center. reflector) viewing the laser output. It may pose an eye hazard.
- Page 5 THIS APPARATUS MUST BE EARTHED. Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of JVC KENWOOD Corporation is: JVCKENWOOD Deutschland GmbH Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY...
- Page 6 ENGLISH Information for Users on Disposal of Old Equipment and Batteries [European Union only] These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product or battery, please consider the collection systems or facilities for appropriate recycling.
- Page 7 IEC62471-5 Location information of the mark As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015...
-
Page 8: Table Of Contents
DLA-NX7. Setting the Picture Mode ........29 m indicates a function that is supported by DLA-NX5. Setting the Color Profile ........30 Items not marked with any of the above symbols are Adjusting to your Preferred Color (Color supported by all models. -
Page 9: Accessories/Optional Accessories
Accessories/Optional Accessories Check the Accessories Lens cover ................1 piece * It is attached to the main unit at the time of shipment. Remote control ............... 1 piece AAA-size batteries (for operational check) ......2 pieces Power cord (for USA) (about. 2 m (about. 78.7 in)) ....1 piece Quick User Guide, safety precautions, warranty card, and other printed material are also included. -
Page 10: Controls And Features
Controls and Features Main Unit - Front A Lens C Indicator This is a projection lens. Do not look through the lens Refer to “Indicator Display on the Main Unit”P. 84. while an image is projected. D Exhaust vent B Remote Sensor (front) Warm air is discharged to cool down the internal Please aim the remote control at this area when using temperature. -
Page 11: Main Unit - Side
Main Unit - Side F Lamp Cover When replacing the light source lamp, remove this cover. (P. 64) Main Unit - Rear G Input terminals J Power input terminal In addition to the video input terminal, there are also Connect the supplied power cord to this terminal. other connection terminals for devices such as K Air Inlets controllers and optional equipment. -
Page 12: Main Unit - Input Terminals
Operation panel [J INPUT K]: Switches the input A: Turns “on”/“off” the [BACK]: Returns to the previous menu power [MENU]: Displays the menu [OK]: Confirms a selection [JKH I] keys: Selects an item Main Unit - Input Terminals A [3D SYNCHRO] terminal E [SERVICE] terminal By connecting a 3D Synchro Emitter (sold separately) For updating the software using a commercially... -
Page 13: Remote Control
Remote Control A B [STANDBY] L [PICTURE MODE] Displays the picture mode Turns off the power. (P. 23) selection menu. (P. 29) B C [ON] M [COLOR PROFILE] Turns on the power. (P. 22) Displays the color profile selection C [INPUT] menu. -
Page 14: Loading Batteries Into The Remote Control
Loading Batteries into the Remote Control If the remote control has to be brought closer to the unit Loading the batteries to operate, it means that the batteries are wearing out. Replace the batteries with new ones (AAA). Insert the batteries according to the t s marks. Be sure to insert the s end first. -
Page 15: Menu
Menu Select the icon at the top of the menu to display its corresponding setting item as shown below. A Picture Adjust B Input Signal C Installation D Display Setup E Function F Information... -
Page 16: Installing The Projector
Installing the Projector Precautions during Installation Please read the following carefully before installing this Using the unit unit. This unit uses a projection lamp, which will heat up when in use. When carrying this unit Please refrain from projecting in the following circumstances. -
Page 17: Precautions During Mounting
Take the necessary actions to prevent the main unit from falling off such as during an earthquake. Regardless of the warranty period, JVC is not liable for When this unit is to be mounted to a fixed position for any product damage caused by mounting the unit with use, install it horizontally. -
Page 18: Adjusting The Position
Adjusting the Position Adjusting the elevation angle of the projector The height and inclination of the unit (0 to 5 mm (0 to 0.2 in)) can be adjusted by turning the feet. Lift the unit and adjust the four feet. 4 Locations Extend Contract... -
Page 19: Connecting The Projector
Connecting the Projector Do not turn on the power until connection is complete. The connection procedures differ according to the device used. For details, please refer to the instruction manual of the device to be connected. This projector is used for projecting images. To output the audio of connected devices, please connect a separate audio output device, such as an amplifier or speaker. -
Page 20: Connecting To The Lan Terminal
Connecting via HDMI-DVI conversion cable Desktop PC, etc. This Unit To [HDMI 1] or [HDMI 2] input terminal DVI Output Terminal HDMI-DVI Conversion Cable (Sold Separately) If noise occurs, move the desktop PC away from this unit. If the video is not displayed, try to reduce the length of the cable or lower the resolution of the video transmitting equipment. -
Page 21: Connecting To The Trigger Terminal
Connecting to the TRIGGER Terminal Screen This Unit To [TRIGGER] Terminal Trigger Input Terminal (Ø3.5) Trigger Cable (Sold Separately) Do not use it to supply power to other devices. Connecting to the audio terminal of another device may cause the device to malfunction or break down. Using beyond the rated value will cause the unit to malfunction. -
Page 22: Viewing Videos
Viewing Videos MEMO Make sure to remove the lens cover. Connect the power cord, and ensure that the “STANDBY/ON” indicator lights up in red. During standby in the “ECO Mode”, the “STANDBY/ON” indicator does not light up even when the power cord is correctly connected. In this case, cancel the standby mode by pressing any button on the remote control unit, or use the A button on the projector unit when you are turning on the power. - Page 23 Turn off the power Remote control: press the B [STANDBY] button Projector unit: press the A button While the “Are you sure you want to turn off?” message is displayed, press the button again. The lamp turns off, and the “STANDBY/ON” indicator switches from a green light to a red blinking light. After the light goes off, the fan will run for about 60 seconds to cool down the lamp (Cool-down mode).
-
Page 24: Adjusting The Projector Screen
Adjusting the Projector Screen Adjusting the Lens According to the Projection Position Press the [LENS CONTROL] button, and use the [JKH I] keys to adjust Focus, Zoom (screen size), and Shift (screen position) Focus Pressing the [LENS CONTROL] or [OK] button each time switches the mode in the following sequence: “Focus”... -
Page 25: Setting Screen Correction
Setting Screen Correction Set Screen Adjust MEMO By selecting the optimal correction mode according to the characteristics of the screen in You can utilize the optional optical sensor and use, corrections can be performed to reproduce dedicated projector calibration software to make finer natural images with balanced colors. -
Page 26: Adjusting The Screen Size (Aspect)
Adjusting the Screen Size (Aspect) The screen size of the projected image can be adjusted optimally according to the original screen size (aspect) that has been input. Press the [MENU] button to display the menu Select “Installation” " “Aspect” in the menu, then select the setting and press [OK] Installation Mode Mode 1 Lens Control... -
Page 27: Viewing 3D Movies
Viewing 3D Movies By using the 3D Glasses (PK-AG1, PK-AG2, or PK-AG3) and 3D Synchro Emitter (PK-EM1 or PK-EM2), both sold separately, you can enjoy 3D video images. For 3D Glasses and 3D Synchro Emitter that are compatible with this unit, please refer to “Optional Accessories”P. -
Page 28: Viewing 3D Movies
Viewing 3D Movies Connect this unit to a 3D-compatible Format Description HDMI device, and turn on the power Auto Automatically determines and to play back the 3D video image sets the format upon receiving 3D For details on how to play back 3D video images, signal. -
Page 29: Selecting An Image Quality According To The Video Type
Selecting an Image Quality According to the Video Type Setting the Picture Mode You can adjust the image quality according to the type of video image you are viewing. Press the [PICTURE MODE] button, use the [JK] keys to select “Picture Mode” and press [OK] You can configure more detailed setting items by pressing the [MENU] button to display the menu, followed by selecting “Picture Adjust”... -
Page 30: Setting The Color Profile
Color space that is suitable for CG animation works. Ideal for animated works with bright colors. Cinema Original JVC cinema-specific color gamut that achieves a balance between increased brightness and color vividness. Color space suitable for HDR content. Film 1 k l Color space that is close to the characteristics of Eastman Kodak Company movie films. -
Page 31: Adjusting To Your Preferred Color (Color Management)
List of selectable “Color Profile” according to “Picture Mode” Picture Mode Color Profile Natural BT.709 BT.2020 k l Video Anime. k l Cinema BT.709 BT.2020 k l Cinema Video HDR10 BT.709 BT.2020 k l Film k l Film 1 Film 2 THX k User 1 to User 6 BT.709... - Page 32 Adjust to the preferred color A Select “Color Selection”, and press the H I keys to Axis Position (Image) Adjustable range when select the color to adjust Red is selected: ± 30° For color adjustment, select the color from the with Red as the center Green Yellow...
-
Page 33: Viewing Hdr Contents
HDR format HDR10 delivers a higher resolution, higher luminance and higher gradation as well as a wider color gamut to reproduce images more realistically in combination with the wide dynamic range. Æ “Original HDR Technology of JVC” (P. 33) Original HDR Technology of JVC This unit is equipped with features for enjoying HDR images in better quality with ease. - Page 34 Auto Tone Mapping Grading varies diversely with the video work, with some content being made brighter and others darker. By using the “Auto Tone Mapping” function, gamma adjustment is performed automatically to achieve the optimal brightness based on the mastering information (Max CLL/Max FALL) contained in the HDR10 content. Also, by configuring the base brightness level in “Mapping Level”, you can enjoy the optimal picture quality according to the screen size and viewing environment.
-
Page 35: Adjusting Movies For Increased Detail And Sharpness (Multiple Pixel Control)
Sharpness (Multiple Pixel Control) The new image-processing algorithm developed by JVC helps to create a natural impression that is sharper at areas in focus, and softer at areas that are not in focus, enabling you to enjoy highly expressive images with a greater sense of depth. -
Page 36: Fine-Tuning The Image Quality
Fine-tuning the Image Quality Adjusting the Output Value of the Projected Image (Gamma) You can adjust the output value of the projected image with respect to the video signal input. Example of gamma adjustment The overall image appear brighter with respect to the original image, making the dark areas more visible. Input Value The photos are for illustrative purposes only. - Page 37 “Gamma” Gamma Description When “Color Profile” is Film 1 Image is close to the characteristics of Eastman Kodak Company set to “Film 1”k l movie films. Film 2 Places more emphasis on the gradation compared to the “Film 1” setting. When “Color Profile”...
-
Page 38: Fine-Tuning To The Preferred Gamma Setting
Fine-tuning to the Preferred Gamma Setting You can perform fine adjustments based on the selected gamma adjustment setting. Press the [GAMMA SETTINGS] button to display the gamma menu You can also perform setting from “Picture Adjust”"“Gamma” in the menu. Adjust to the preferred setting Select the color to be adjusted from “Color Selection”... - Page 39 Selecting the Base Correction Value (Initial Value) for Adjustment Selecting one of the “Custom 1” to “Custom 3” settings in “Gamma” allows you to select the “Correction Value”. Select the base “Correction Value” for adjustment using the H I keys. The selectable correction values vary according to “Picture Mode”.
-
Page 40: Set Auto Tone Mapping
Gamma Adjustment When the gamma curve is a straight line: The brightness and contrast of the video input will be Gamma Curve the same as that of the video output. Bright Area for which the gamma curve is above the straight line (A): Video output appears brighter than the input. - Page 41 Using Tone Mapping for Manual Adjustments “HDR(PQ)” gamma is the PQ curve adopted by HDR10. Fine adjustments can be made according to the screen size and environment although the default settings for viewing with the projector have been adjusted to allow optimum viewing.
-
Page 42: Reducing The After-Image Of Fast-Moving Images (Motion Control)
For users seeking to obtain a gamma curve that is more faithful to the original PQ curve Our projectors have been adjusted to display the projector images on the screen in the optimal quality in the default setting based on the original PQ curve. For users who wish to obtain results more faithful to the original PQ curve, please adjust manually with reference to the values below. - Page 43 Clear Motion Drive (C.M.D.) Optimal interpolation according to the content is made possible with the new high-definition image interpolation technique. For some scenes, interpolation may cause distortion in the image. In this case, set to “Off”. Original Image Interpolation Enabled Intermediate Frame Generation Intermediate Frame Generation Press the [C.M.D.] button, use the [JK] keys to select a...
-
Page 44: Adjustments And Settings In The Menu
Adjustments and Settings in the Menu Pressing the [MENU] button displays the menu. Press the [JKH I] keys to select an item, followed by pressing the [OK] button to confirm the selection. List of Menu Items Picture Adjust Picture Mode ..............................P. 29 9 Lamp Power .............................. - Page 45 Installation Installation Mode .............................. P. 53 Lens Control ..............................P. 24 9 Focus ................................P. 24 9 Zoom ................................P. 24 9 Shift ................................P. 24 9 Image Pattern .............................. P. 54 9 Lock ................................P. 54 9 Lens Center ..............................P. 54 Pixel Adjust ...............................
-
Page 46: Picture Adjust
Continuous use at the “High” setting may cause the lamp to darken faster. Aperture JVC has developed an image analysis algorithm, which analyzes the state of the video image in real time, and controls the aperture dynamically according to the image information. -
Page 47: Color Temp
Color Profile By setting the “Color Profile” (color space information) according to the “Picture Mode”, you can fine-tune the image quality according to the movie you are viewing. Æ “Setting the Color Profile” (P. 30) Color Management Each of the colors is adjustable according to the user’s preference. Æ... - Page 48 List of selectable “Color Temp.” according to “Picture Mode” Picture Mode Color Temp. Film k l Xenon 1 k l Xenon 2 k l Custom 1 to Custom 2 Cinema 5500K 6500K 7500K 9300K Xenon 1 k l Xenon 2 k l High Bright HDR10 Custom 1 to Custom 2...
-
Page 49: Auto Tone Mapping
List of selectable “Correction Value” according to “Picture Mode” Picture Mode Correction Value Film k l Xenon 1 k l Xenon 2 k l Cinema 5500K 6500K 7500K 9300K Xenon 1 k l Xenon 2 k l High Bright Natural 5500K HDR10 6500K... -
Page 50: Mpc/E-Shift K, Mpc Level L M
MPC/e-shift k, MPC Level l m You can enjoy natural, expressive images with a stronger sense of depth. Æ “Adjusting Movies for Increased Detail and Sharpness (Multiple Pixel Control)” (P. 35) 8K e-shift k Switches the display resolution. Setting values: On (8K), Off (4K) Graphic Mode Switches the MPC setting. -
Page 51: Input Signal
Input Signal Input Level For setting the dynamic range (gradation) of the video input. If the image is not displayed properly even after selecting “Auto”, select an appropriate setting. If the dynamic range is not appropriate, the bright areas become overexposed, and the dark areas become underexposed. -
Page 52: Hdr Setting
HDR Setting HDR10 Auto Select For configuring the automatic switching setting of “Picture Mode” when receiving HDR10 packets. Setting Description HDR10 Automatically switches “Picture Mode” to “HDR10” when receiving HDR10 packets. User 1 to User 6 Automatically switches “Picture Mode” to User 1 to User 6 when receiving HDR10 packets. -
Page 53: Installation
Installation Installation Mode Collectively manages the setting values of “Lens Control”, “Pixel Adjust”, “Mask”, “Anamorphic”, “Screen Adjust”, “Installation Style”, “Keystone”, “Pincushion” and “Aspect”. * The lens position may be shifted slightly with respect to the position that was saved. Mode Select For selecting the group to save and retrieve the setting values. -
Page 54: Image Pattern
Lens Control Focus / Zoom / Shift For adjusting the lens according to the projection position Æ “Adjusting the Lens According to the Projection Position” (P. 24) Image Pattern For setting whether to display the lens adjustment pattern. Setting Description Displays external signals, and does not display the lens adjustment pattern. -
Page 55: Pixel Adjust
Pixel Adjust For correcting the phase shifting between each RGB color by adjusting the pixel. Adjust For setting the adjustment feature to On or Off. Adjust Area Setting Description Whole Adjusts the entire image. Zone Enables fine adjustment of each area by dividing the screen evenly into 10 vertical and horizontal zones. - Page 56 Whole Adjust (Pixel) Operation Procedure For making general adjustments to slight color fringing in the horizontal/vertical directions of the video image. A Set “Adjust Area” to “Whole” B Select “Adjust Color” and “Adjust Pattern Color” C Select “Adjust (Pixel)”, and press the [OK] button The Adjustment mode is activated, and the selected adjustment pattern and Adjustment (Pixel) window are displayed.
- Page 57 Whole Adjust (Fine) Operation Procedure For making general adjustments on the misalignment of the entire screen using “Adjust (Pixel)”, followed by making fine adjustments. A Set “Adjust Area” to “Whole” B Select “Adjust Color” and “Adjust Pattern Color” C Select Adjust (Fine), and press the [OK] button The Adjustment mode is activated, and the selected adjustment pattern and Fine window are displayed.
- Page 58 Zone Adjust Operation Procedure For fine-tuning misalignments on a part of the screen after adjusting the overall screen misalignment using “Adjust (Pixel)” and “Adjust (Fine)”. The screen can be divided vertically and horizontally into 10 sections for partial adjustments to be made. A Set “Adjust Area”...
-
Page 59: Mask
Mask For hiding the peripheral area of the image with a mask (black strip). Setting Description Not masked. Hides the ranges specified in “Top”, “Bottom”, “Left” and “Right” by masking (with black strips). Mask: black strip around the periphery “Top” / “Bottom” / “Left” / “Right” For specifying the ranges to hide by masking (with black strips). -
Page 60: Display Setup
Keystone For correcting any keystone distortion that occurs when the projector is installed at an angle with respect to the screen. Vertical setting range: -16 to +16 * Increasing the value changes the aspect slightly. * This function cannot be used if “Pincushion” is set. Pincushion Corrects the geometric distortion that occurs when projecting on a curved screen. -
Page 61: Function
Logo For setting the display of logo during startup to “On” or “Off”. Setting Description Not displayed. Displays the “D-ILA” logo for 5 seconds during startup. Language For setting the display language to “English”, “Deutsch”, “Español”, “Italiano”, “Français”, “Português”, “Nederlands”, “Polski”, “Norsk”, “Русский”, “中文”, “繁體中文”, or “日本語”. -
Page 62: Network
Network For specifying the settings for external control from a PC or smartphone. Setting Description DHCP Client Obtains the IP address automatically from the DHCP server inside the connected network. For configuring the network settings manually. IP Address For configuring the IP address. Subnet Mask For configuring the subnet mask. -
Page 63: Information
High Altitude Mode For setting the high altitude mode to “On” or “Off”. Set to “On” when using the projector at a location of low atmospheric pressure (higher than 900 m (3,000 ft) above sea level). Factory Reset For restoring the settings of this unit to the factory default. However, the following settings will not be reset. Gamma data saved in “Gamma”... -
Page 64: Replacing The Lamp
Replacing the Lamp The lamp is a consumable item. If the image appears dark or the lamp goes out, replace the lamp unit. When the lamp replacement time approaches, the user is notified with a message displayed on the screen and by the indicator. - Page 65 Tighten the screws of the new lamp MEMO unit Usable lamp life Tighten the screws with a t screwdriver. When the lamp is used with “Lamp Power” set to “Low”, the lamp life on this unit is approximately 4500 hours. This is the average usable time and not a guaranteed value.
-
Page 66: Resetting The Lamp Time
Resetting the Lamp Time Reset the lamp time when you have replaced the lamp. Resetting the lamp time using the remote It provides an estimated timing for lamp replacement control Resetting the lamp time from the menu Insert the power plug into the power screen outlet Press the [MENU] button to display... -
Page 67: Maintaining The Cabinet And Remote Control
If the sponge filter is damaged and needs to be replaced or if dirt has entered the unit, please consult the authorized dealer from which this unit is purchased or any nearby JVC servicing center. * Be sure to attach the filter. Using this unit without attaching the filter may cause unexpected malfunction. -
Page 68: Troubleshooting
Troubleshooting Before sending the unit to your authorized dealer for repair, please check the following points. The following symptoms are not malfunctions. You do not need to worry about the following symptoms if there is no abnormality on the screen. A part of the top or front surface of the unit is hot. - Page 69 Video image does not appear Check Action Refer to Is the correct external input selected? Select the correct external input terminal. P. 22 Is the power of the AV device or PC Turn on the power of the AV device or PC and play the P.
- Page 70 Video image looks unnatural Colors are unnatural Check Action Refer to Is the color space of the input signal The color may turn out unnatural when the input signal is P. 51 correctly set? different from that in the projector setting. Set the “Color Space”...
- Page 71 Striped patterns appear on the screen Check Action Refer to Does the fabric of the screen have a Interference fringes may sometimes occur between the — regular pattern? fabric pattern and the pixels. Please consult the authorized dealer. Video images are missing Check Action Refer to...
-
Page 72: When The Following Messages Appear
When the Following Messages Appear... Message Description Action No device is connected to the input Input the video signals. terminal. No Input The input terminal is connected but there is no signal. The video signal input is not supported Input video signals that can be used. Out of Range on this unit. -
Page 73: External Control
External Control It is possible to control this unit by connecting it to a PC using an RS-232C cross cable (D-sub 9-pin). The projector can be controlled by connecting it to a PC through the computer network with a LAN cable for control commands to be sent to the projector. -
Page 74: Command Format
Command Format The command between this unit and the computer consists of “Header”, “Unit ID”, “Command”, “Data” and “End”. Header (1 byte), Unit ID (2 bytes), Command (2 bytes), Data (n bytes), End (1 byte) Header This binary code indicates the start of communication. Binary Code Type Description... -
Page 75: Remote Control Code
Remote Control Code Binary code is sent during communication. The following applies to the case when the remote control code is “A”. In the case of “B”, add “36” to the beginning of the code. Remote Control Button Binary Code Remote Control Button Binary Code Name... -
Page 76: Communications Example
Communications Example This section shows the communication examples of RS-232C. Operating command Type Command Description Connection check PC " This unit: 21 89 01 00 00 0A Connection check This unit " PC: 06 89 01 00 00 0A Power (On) PC "... -
Page 77: Specifications
Specifications Product Name D-ILA Projector Model Name DLA-NX9B, DLA-NX7B, DLA-NX5B Display Panel/Size D-ILA device *1, 2 0.69” 4K D-ILA (4096 x 2160 pixels) x 3 Projection Lens 2.0 x power zoom lens, motorized zoom and focus Light-source Lamp 265 W ultra-high pressure mercury lamp [product no.: PK-L2618U Average lifespan: 4500 hours (“Low”... - Page 78 k has obtained the “THX 4K DISPLAY Certification” determined by THX Ltd. In addition to 2K content, you can also enjoy faithful reproduction of images in a quality as intended by the filmmaker during playback of 4K content. The THX 4K DISPLAY certification is “an indication of high definition and high resolution”, which is granted to products that have cleared more than 400 image quality tests.
- Page 79 Screen Size and Projection Distance Projection Distance (m) Screen Size 17:9 Screen 16:9 Screen 2.35:1 Screen 4:3 Screen Diagonal (Inch) Wide-end Tele-end Wide-end Tele-end Wide-end Tele-end Wide-end Tele-end 1.67 3.43 1.75 3.61 1.86 3.82 2.16 4.44 1.96 4.02 2.06 4.23 2.18 4.47 2.54...
- Page 80 Projection Distance (Inch) Screen Size 17:9 Screen 16:9 Screen 2.35:1 Screen 4:3 Screen Diagonal (Inch) Wide-end Tele-end Wide-end Tele-end Wide-end Tele-end Wide-end Tele-end 65.5 135.1 69.1 142.2 73.1 150.3 85.2 174.7 77.0 158.2 81.1 166.4 85.8 175.8 100.0 204.3 88.5 181.2 93.1 190.6...
- Page 81 l / m Projection Distance (m) Screen size 17:9 Screen 16:9 Screen 2.35:1 Screen 4:3 Screen Diagonal (Inch) Wide End Tele End Wide End Tele End Wide End Tele End Wide End Tele End 1.79 3.66 1.88 3.85 1.99 4.07 2.31 4.73 2.09...
- Page 82 Projection Distance (Inch) Screen Size 17:9 Screen 16:9 Screen 2.35:1 Screen 4:3 Screen Diagonal (Inch) Wide-end Tele-end Wide-end Tele-end Wide-end Tele-end Wide-end Tele-end 70.5 144.1 74.0 151.6 78.3 160.2 90.9 186.2 82.3 168.5 86.6 177.2 91.7 187.4 106.3 217.3 94.5 192.9 99.2 202.8...
- Page 83 Types of Possible Input Signals Video Digital Video Signal 480p 576p 720p 50/60 Hz 1080i 50/60 Hz 1080p 24/25/30/50/60 Hz 2K (2048×1080) 24/25/30/50/60 Hz 4K (3840x2160) 24/25/30/50*/60* Hz 4K (4096x2160) 24/25/30/50*/60* Hz 3D Signal Frame Packing 720p 50/60 Hz 1080p 24 Hz Side-by-side 720p 50/60 Hz 1080p 50/60/24 Hz...
- Page 84 Indicator Display on the Main Unit Meaning of the front panel indicators The indicator is solid. The indicator appears blinking. Operation mode display Displays using the different colors and solid/blinking light of the indicator on the projector unit. “STANDBY/ON” lights up (red) “STANDBY/ON”...
- Page 85 Warning display You can tell the details of a warning from the (repeated) displays of the “WARNING” and “LIGHT” indicators. The “STANDBY/ON” indicator will light up or appear blinking according to the operation mode of the projector unit. (Please refer to ““Operation mode display”P. 84”.) The Warning mode is activated once the message is displayed.
- Page 86 Dimensions (Unit: mm (in)) Top Surface Bottom Surface 337 (13-1/4) 500 (19-3/4) (1-5/8) (1-7/16) Front Rear Surface 98 (3-7/8) 243 (9-19/32) 98 (3-7/8) 329 (12-15/16) 211 (8-5/16) (2-13/16) (2-13/16)
- Page 87 l / m Top Surface Bottom Surface 337 (13-1/4) 500 (19-3/4) (1-5/8) (1-7/16) Front Rear Surface 98 (3-7/8) 243 (9-19/32) 98 (3-7/8) 329 (12-15/16) 211 (8-5/16) (2-13/16) (2-13/16)
-
Page 88: Index
Contrast ............... 50 Controls and Features.......... 10 O Off Timer .............. 61 Optional Accessories..........9 D Dark Level / Bright Level ........38 Original HDR Technology of JVC......33 Dimensions............86 Display Setup Menu..........60 P Partial Adjustment (Zone Adjust).....55, 58 Distortion Correction..........60 Picture Adjust Menu..........46... - Page 89 Types of Possible Input Signals......83 U User Name Edit ............46 V Viewing 3D Movies..........27 Viewing HDR Contents......... 33 Viewing Videos............. 22 W When the Following Messages Appear....72 Whole Adjust (Fine) ........55, 57 Whole Adjust (Pixel) ........55, 56 Z Zoom ..............24 Alphanumeric 3D Format ............
- Page 92 1018KSH-SW-XX © 2018...