Table of Contents
Advertisement
Print Mode
6.3
Setting the CP 521 Parameters in Print Mode
The CP 521 can only be operated in print mode if an initialized memory
submodule has been plugged in. Store the following in the memory submodule:
•
Parameter setting data of the CP 521 in data block (DB) 1
•
Message texts, optionally in DBs 2 to 63 ( 6.4)
The CP 521 requires the following parameter setting data:
•
Parameters for the printer interface (baud rate, type of interface, BUSY
signal, ...)
•
Configuration data for entering message texts (function character, end-of-
text character)
•
Configuration data for the message text printout (output form for date and
time of day, headers and footers, ...)
The CP 521 has default values for all parameters. If you want to use other values,
you must store your parameter setting data in a memory submodule in DB 1. This
parameter setting data is subdivided into seven parameter blocks to simplify
input of parameter data as much as possible.
Note:
DB 1 is only required if the parameter setting data deviates from the default
values.
6-4
CP 521
GWA 4NEB 812 6030-02b
Advertisement
Chapters
Table of Contents
