First Time Setup
The first time setup screen is displayed only when the TV is turned on for the first time after the power cord
is inserted into a wall outlet and when "Auto power on" (p. 53) is set to "No".
or
Turn the TV On with the POWER button
(TV)
(Remote)
or
Configure your viewing mode
Select your language
Language / Idioma / Langue
Step 1 of 7 / Paso 1 de 7 / Étape 1 de 7
Select your language
Seleccione su idioma
Sélection de la langue
English
Español
Français
OK
Select
Selección
Sélection
Select your country
Country
Step 2 of 7
Select the country where this TV is being used.
U.S.A.
Canada
Other
OK
Select
RETURN
Select your viewing mode
Set viewing mode
Step 3 of 7
Select your viewing environment
Home use
Store Demonstration
OK
Select
RETURN
●
Please confirm your selection (Home Use) before pressing OK button.
■
If you select " Store Demonstration" by mistake in
confirmation screen will be displayed.
You are selecting the store demonstration mode.
Yes
No
If you select "Yes", the picture mode will regularly reset
to "Vivid" and a Picture Refresh message will be displayed on the
screen.
●
Select "No" and return to previous screen
●
If you select "Yes", Screen enters the store demonstration mode.
To display the "Set viewing mode" screen again as shown above and
select "Home Use", do one of the following:
• Press and hold down the front POWER button for at least five seconds.
• Unplug power cord for 30 seconds and plug it again.
Note
●
If you use any other step other than
the EXIT button to quit before completing the settings, the next time you turn
the TV on, "First time setup" will not be automatically displayed.
• The settings up to that point are saved.
• You can start "First time setup". (p. 53)
●
Language, ANT/Cable setup, Input labels, and Clock can also be changed
in the Settings Menu. (p. 53)
select
OK
select
OK
(Be sure to select "Home use")
select
OK
select
OK
then turn the TV off, or if you used
,
15