Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Barco R9002260
Summary of Contents for Barco R9002260
- Page 1 DATA 808s SP R9002260 R9002269 OWNER'S MANUAL...
- Page 2 BARCO PROJECTION SYSTEMS DATA 808s SP R9002260 R9002269 OWNER'S MANUAL Date : Art. No. : Revision : 010799 R5976053...
- Page 3 Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visite Barco at the web : http://www.barco.com Printed in Belgium...
- Page 4 Table of contents TABLE OF CONTENTS...
- Page 5 Table of contents...
-
Page 6: Safety Instructions
Safety Instructions SAFETY INSTRUCTIONS Before operating this equipment please read this manual thoroughly, and retain it for future reference. Installation and preliminary adjustments should be performed by qualified BARCO personnel or by author- ized BARCO service dealers. - Page 7 The exclusion zone must be not less than 10 cm (4”) for BARCO Retro Projectors and not less than 40 cm (16”) for all other BARCO projectors. Do not cover the projector with any material while the projector is in operation.
-
Page 8: Location And Function Of Controls
Location and Functions of Control LOCATION AND FUNCTION OF CONTROLS REAR PANEL TERMINOLOGY PO RT 2 TrrÃv†‡ hyyh‡ v‚ Ãv†‡…ˆp‡v‚†Ãi r s‚…rÃp‚ rp‡v tÇ‚Çurƈƒƒy’ Uuv † à qr‰ v prÃp‚€ƒ yv r † Ãv‡uÃh …‡ à $ s ‡urÃA88à … ˆyr†Ã ÃPƒ r …h‡v‚ Ãv†Ã†ˆiw r p‡Ã‡‚ W‚v…Ãy h‡... -
Page 9: Control Panel Terminology
Location and Functions of Control CONTROL PANEL TERMINOLOGY... - Page 10 Location and Functions of Control (;,7 (17(5 67%< 3$86( 7(;7 )5((= +(/3 3+$6( 6+$531(66 7,17 &2/25 %5,*+71(66 &2175$67 32 a...
- Page 11 Location and Functions of Control...
- Page 12 Connections CONNECTIONS PORT 2 U uv †Ã qr‰v pr à p ‚ € ƒ y vr† à v‡ u à h …‡Ã $  s T rrà v †‡ hy y h‡ v ‚ à v †‡ … ˆp ‡ v ‚ †Ã irs ‚ …rà p ‚ rp‡ v tà ‡‚à ‡ urà †ˆƒ ƒy ’ ‡ur Ã...
- Page 13 Connections PROJECTOR WARM UP A FULL WHITE PATTERN WILL BE GENERATED FOR 20 MINUTES; FOR INMEDIATE USE OF THE PROJECTOR, PRESS <EXIT>; WARNING : SKIPPING THIS PROCEDURE CAN REDUCE THE INITIAL PICTURE QUALITY OF THE PROJECTED IMAGE; THIS OPTION CAN BE DISABLED IN THE SERVICE MENU Warning : skipping this warm up procedure can reduce the initial picture quality of the...
- Page 14 Connections PORT 2 Uuv †Ã qr‰ v p r à p ‚€ƒy v r† à v ‡uà ƒh… ‡Ã $ à ‚ s T rrà v †‡hyyh ‡v‚ à v † ‡…ˆp‡ v‚ †Ã i rs ‚… rà p‚ rp‡ v tÇ ‚à ‡ u rƈƒ ƒy ’ ‡...
- Page 15 Connections PORT 2 Uu v†Ã q r‰v p r Ãp ‚€ƒ yv r† à v ‡uà ƒh … ‡ à $ à ‚ s T rrà v †‡hyyh ‡v‚ à v † ‡…ˆp ‡v‚ †Ã irs ‚… rà p‚ rp‡ v tÇ ‚à ‡u rƈƒ ƒy ’ ‡ur ÃA8 8 Ã...
- Page 16 Connections PORT 2 Uuv †Ã qr‰ v p r à p ‚€ƒy v r† à v ‡uà ƒh… ‡Ã $ à ‚ s T rrà v †‡hyyh ‡v‚ à v † ‡…ˆp‡ v‚ †Ã i rs ‚… rà p‚ rp‡ v tÇ ‚à ‡ u rƈƒ ƒy ’ ‡...
-
Page 17: Peripheral Equipment
Connections PORT 2 Uu v†Ã q r‰v p r Ãp ‚€ƒ yv r† à v ‡uà ƒh … ‡ à $ à ‚ s T rrà v †‡hyyh ‡v‚ à v † ‡…ˆp ‡v‚ †Ã irs ‚… rà p‚ rp‡ v tÇ ‚à ‡u rƈƒ ƒy ’ ‡ur ÃA8 8 Ã... - Page 18 Controlling CONTROLLING : Do not display a stationary image with full brightness and contrast for longer than 20 min., otherwise you risk damage to the CRT's. 310a.DRW...
- Page 19 Controlling PORT 2 T r rÃv † ‡h y yh ‡v‚ Ãv†‡ …ˆp‡ v‚ † Ãir s ‚ … rà p‚ r p‡v t Ç ‚ Ç urÆ ˆ ƒ ƒy’ U uv† Ãqr ‰ vp rÃp ‚ € ƒ y vr † Ãv ‡uà h … ‡ à $Ã...
- Page 20 Controlling WARNING INPUT NOT AVAILABLE Comp. Video S-Video /Comp. Video* 4 or 5 Component video WARNING RGB with Tri level sync SOURCE NOT AVAILABLE Component video with Tri-level sync BRIGHTNESS...
- Page 21 Controlling...
-
Page 22: Start Up Of The Adjustment Mode
Start Up of the Adjustment Mode START UP OF THE ADJUSTMENT MODE ADJUSTMENT MODE é ê WARNING RISK OF ELECTRICAL SHOCK NO USER ADJUSTABLE PARTS INSIDE... - Page 23 Start Up of the Adjustment Mode...
-
Page 24: Random Access Adjustment Mode
Random Access Adjustment Mode RANDOM ACCESS ADJUSTMENT MODE é ê ADJUSTMENT MODE... - Page 25 Random Access Adjustment Mode...
- Page 26 Random Access Adjustment Mode é ê INTERNAL # PATTERN é ê...
-
Page 27: Color Balance
Random Access Adjustment Mode RANDOM ACCESS ADJUSTMENT MODE é ê PICTURE TUNING Color Balance PICTURE TUNING COLOR BALANCE COLOR BALANCE é ê è ç é ê é ê è ç é ê... -
Page 28: Sync Fast/Slow Adjustment
Random Access Adjustment Mode Sync Fast/Slow Adjustment PICTURE TUNING é ê SYNC : FAST Peaking é ê PICTURE TUNING PEAKING PEAKING Clamp Tuning é ê PICTURE TUNING CLAMP TUNING : normal... -
Page 29: Port 2 : Video Or S-Video
Random Access Adjustment Mode Port 2 : Video or S-Video é ê PICTURE TUNING PORT2 : S-VIDEO Line Doubler/Multiplier (option) PICTURE TUNING LINE DOUBLER : ON RANDOM ACCESS ADJUSTMENT MODE COLOR SELECT COLOR SELECT... - Page 30 Random Access Adjustment Mode RANDOM ACCESS ADJUSTMENT MODE FOCUSING FOCUSING Focusing color select. Midpoint focusing FOCUSING GREEN Top image focusing GREEN FOCUSING Bottom image focusing Left image focusing Right image focusing Blue on source...
- Page 31 Random Access Adjustment Mode é ê RANDOM ACCESS ADJUSTMENT MODE GEOMETRY GEOMETRY GEOMETRY é ê H PHASE >< H PHASE >< H PHASE >< H PHASE...
- Page 32 Random Access Adjustment Mode Raster Shift Adjustment GEOMETRY RASTER SHIFT forbidden area projected raster Warning crt faceplate border phosphor border correct raster position wrong raster position...
- Page 33 Random Access Adjustment Mode GEOMETRY LEFT-RIGHT (E-W) LEFT-RIGHT é ê é ê Corrects for curvature of the vertical lines in the middle of the image. LEFT-RIGHT Corrects the tilting of the vertical lines in the middle of the image. Corrects for curvature of the vertical lines on the right side Corrects the keystone geometry correction of the vert.
-
Page 34: Seagull Correction
Random Access Adjustment Mode Seagull correction GEOMETRY LEFT-RIGHT (E-W) é ê è ç LEFT-RIGHT SEAGULL CORRECTION GEOMETRY LEFT SIDE CORRECTION LEFT SIDE CORRECTION é ê LEFT SIDE CORRECTION é ê... - Page 35 Random Access Adjustment Mode GEOMETRY TOP-BOTTOM (N-S) é ê TOP-BOTTOM (N-S) é ê Corrects for curvature of the horizontal lines in the middle of the image. Corrects the tilting of the horizontal lines in the middle of the image. TOP-BOTTOM Corrects for curvature of the horizontal lines on the upper side Corrects the keystone geometry correction of the hor.
- Page 36 Random Access Adjustment Mode Seagull Correction GEOMETRY TOP-BOTTOM (N-S) é ê é ê TOP-BOTTOM (N-S) SEAGULL CORRECTION é ê GEOMETRY H SIZE è ç H SIZE...
- Page 37 Random Access Adjustment Mode GEOMETRY é ê V LINEARITY V LINEARITY GEOMETRY V SIZE V SIZE Ideal Ideal Image too Image Image too Image Tall Hight Short Hight...
- Page 38 Random Access Adjustment Mode GEOMETRY BLANKING BLANKING Adjustment of the blanking on the of the image BLANKING Adjustment of the blanking on the bottom of the image Adjustment of the blanking on the left side Adjustment of the blanking on the right side...
-
Page 39: Coarse Convergence Adjustment
Random Access Adjustment Mode RANDOM ACCESS ADJUSTMENT MODE CONVERGENCE CONVERGENCE Coarse Convergence Adjustment. CONVERGENCE RED ON GREEN COARSE CONVERGENCE COARSE CONVERGENCE HORIZONTAL SIDES... -
Page 40: Fine Convergence Adjustment
Random Access Adjustment Mode COARSE CONVERGENCE VERTICAL CORNERS CONVERGENCE Fine Convergence Adjustment. CONVERGENCE CONVERGE ADJUSTMENT green image red image... -
Page 41: Service Mode
Service Mode SERVICE MODE ADJUSTMENT MODE SERVICE ê SERVICE MODE é SERVICE MODE... - Page 42 Service Mode SERVICE MODE IDENTIFICATION SERVICE MODE COPY A BLOCK COPY MODE COPY BLOCK...
-
Page 43: Deleting Block By Block
Service Mode Deleting block by block SERVICE MODE DELETE A BLOCK é ê DELETE MODE DELETE BLOCK Deletion of all blocks SERVICE MODE DELETE ALL BLOCKS DELETE BLOCK... - Page 44 Service Mode SERVICE MODE è ç CHANGE PASSWORD PASSWORD CHANGE PASSWORD SERVICE MODE CHANGE LANGUAGE é ê é ê LANGUAGE SERVICE MODE RUN TIME RUN TIME 105 h...
- Page 45 Service Mode SERVICE MODE SET TO MIDPOSITION SET TO MIDPOSITION SERVICE MODE é ê UNDO MIDPOSITION SERVICE MODE CONVERGENCE MID CONVERGENCE MID SERVICE MODE é ê UNDO CONVERGENCE MID...
- Page 46 Service Mode Spot shapes before dynamic astigmatism correction Diagonal Spot shapes astigmatism correction after dynamic (use the astigmatism correction arrow key) Axial astigmatism correction (use the arrow key) SERVICE MODE DYNAMIC ASTIGMATISM DYNAMIC ASTIGMATISM DYNAMIC ASTIGMATISM é ê è ç...
- Page 47 Service Mode SERVICE MODE G2 ADJUSTMENT 'G2 adjustment should be performed by BARCO personnel, or BARCO authorized dealers'. SAFETY NOTICE RISK OF ELECTRICAL SHOCK SERVICE MODE GAMMA CORRECTIONS 'The Gamma Corrections are factory adjusted using an ACTAS colour analyser !
- Page 48 Service Mode é ê SERVICE MODE PROJECTOR WARM UP PROJECTOR WARM UP SERVICE MODE é ê CRT DRIVE MODE é ê CRT DRIVE MODE WARNING PERMANENT BOOST MODE IN USE !
-
Page 49: Messages, Warnings And Failure Codes
Messages, warnings and failure codes MESSAGES, WARNINGS AND FAILURE CODES... - Page 50 Messages, warnings and failure codes...
- Page 51 Options OPTIONS shield conductor...
- Page 52 Options...
- Page 53 Adjustment Blocks and Source Numbers 90-99 ADJUSTMENT BLOCKS AND SOURCE NUMBERS 90 - 99...