Table of Contents
Advertisement
3.
USB 2.0 connectors (10-1 pin USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specifications and supports up to
480Mbps connection speed.
H110M-A
H110M-A USB2.0 connector
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
4.
Intel
H110 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~4)
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
H110M-A
H110M-A SATA 6.0Gb/s connectors
When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI].
ASUS H110M-A
USB910
PIN 1
SATA6G_1
SATA6G_2
SATA6G_3
SATA6G_4
1-15
Advertisement
Table of Contents
