hit counter script

Controls; Operating The Parking Brake - Toro 74246 Operator's Manual

60 in turbo force side discharge mower
Table of Contents

Advertisement

Controls

Become familiar with all the controls (Fig. 7 and 8) before
you start the engine and operate the machine.
1
3
3
5
m–6834
Figure 7
1. Motion control lever
2. Parking brake lever
3. Height-of-cut lever
4. Fuel cap (both sides)
1
6
3
5
m–6838
Figure 8
1. Ignition switch
2. Throttle
3. Choke
Using the Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running. Use
these times for scheduling regular maintenance.
8
6
7
4
2
5. Lift assist lever
6. Controls
7. Seat belt
8. Roll bar
4
2
4. Power take off (PTO)
5. Hour meter
6. Gas cap
18
Unlatch the seat and lift it up to view the hour meter
(Fig. 8).

Operating the Parking Brake

Always set the parking brake when you stop the machine
or leave it unattended.
Setting the Parking Brake
1. Move the motion control levers (Fig. 7) out to the
neutral lock position.
2. Pull back and up on the parking brake lever to set the
parking brake (Fig. 9). The parking brake lever should
stay firmly in the engaged position.
Warning
Parking brake may not hold machine parked on a
slope and could cause personal injury or property
damage.
Do not park on slopes unless wheels are chocked
or blocked
Releasing the Parking Brake
1. Push forward and down on the parking brake lever to
release the parking brake (Fig. 9). The parking brake is
disengaged and the lever will rest against the brake
stop.
1
2
Figure 9
1. Parking brake-ON
2. Parking brake-OFF
3
m–4163
3. Brake Stop

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z master z557Z557 z master

Table of Contents