AEG 111 K - W/D/G Operating Instructions Manual
Electric hob
Hide thumbs
Also See for 111 K - W/D/G:
- Operating instructions manual (16 pages) ,
- Operating instructions manual (18 pages) ,
- Operating instructions manual (16 pages)
Related Manuals for AEG 111 K - W/D/G
Summary of Contents for AEG 111 K - W/D/G
- Page 1 111 K - W/D/G Electric hob Table de cuisson électrique Operating Instructions Notice d’utilisation...
-
Page 2: Important Safety Information
ENGLISH Important Safety Information You MUST read these warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 01635 572700 Installation This hob must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. -
Page 3: Environmental Information
Do not use this hob if it is in contact with water. Do not operate the hob with wet hands. Ensure the control knobs are in the ‘OFF’ position when not in use. When using other electrical appliances, ensure the cable does not come into contact with the hot surfaces of the cooking appliance. -
Page 4: Table Of Contents
Contents Important Safety Information ... 2 Instructions for the User... 6 Description of the Hob ... 6 Operation ...7 Maintenance and Cleaning ... 9 The Hob Top ...9 The Hotplates ... 9 Something Not Working? ... 10 Service and Spare Parts ... 11 Guarantee Conditions ... - Page 5 Guide to Use the instructions The following symbols will be found in the text to guide you throughout the Instructions: Safety Instructions Step by step instructions for an operation Hints and Tips This appliance is manufactured according to the following EEC directives: 73/23 EEC - 90/683 EEC - 93/68 EEC - 89/336 EEC - 90/396 EEC, current edition.
-
Page 6: Instructions For The User
Description of the Hob Front Left Hotplate Front Right Hotplate Operating Pilot Lamp INSTALLATION The hob must be installed according to the instructions supplied. The hob must be installed by qualified personnel to the relevant British Standards. Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown. -
Page 7: Operation
Operation ELECTRIC HOTPLATES To switch on a hotplate, turn the relevant control knob anticlockwise to the required heat setting. The control knob is numbered 1 - 3 0 - OFF 1 - Minimum 3 - Maximum. The hob has four rapid hotplates. The rapid hotplates are indicated by a red dot, and will heat up more quickly than a normal plate. - Page 8 Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite. If the control knobs become difficult to turn, please contact your local AEG Service Centre.
-
Page 9: Maintenance And Cleaning
Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. The Hob Top Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little wasing up liquid has been added. -
Page 10: Something Not Working
Something Not Working? If the hob is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. SYMPTOM The plate does not heat up. The plate is not giving satisfactory results If after all these checks, your hob still does not operate correctly, contact your local AEG Service Force Centre. -
Page 11: Service And Spare Parts
4. The model and the serial number (see rating label on the back of this instruction booklet) 5. Date of purchase CUSTOMER CARE For general enquiries concerning your AEG appliance and for further information on AEG products, contact our Customer Care Department by letter or telephone as follows: Customer Care Department... -
Page 12: Guarantee Conditions
3. Should guarantee repairs be necessary the purchaser must inform the nearest customer service office (manufacturer’s service or authorised agent). AEG reserves the right to stipulate the place of the repair (i.e. the customer’s home, place of installation or AEG workshop). -
Page 13: Engineer Technical Data
Instructions for the Installer Engineer technical data OVERALL DIMENSIONS Width: Depth: Height: Weight: CUT OUT DIMENSIONS Width: Depth: Thickness: SUPPLY CONNECTIONS Electric: 230-240V 50Hz supply. HEATING ELEMENTS RATING Rapid Front Left Hotplate Ø 180 mm. 2090 W Rapid Back Left Hotplate Ø... -
Page 14: Important Safety Requirements
Important safety requirements This hob must be installed in accordance with the IEE Wiring Regulations (Current Edition). Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions. Location This hob has been registered as a "Class Y"... -
Page 15: Installation
Installation IMPORTANT This hob must be installed by qualified personnel to the relevant British Standards. The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this book be ignored. Cut Out Size The dimensions of the cut-out are given in the diagram. -
Page 16: Building Over A Cupboard Or Drawer
Building over a cupboard or drawer If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside of the work surface. It is also recommended to carry out the electrical connection to the hob as shown in diagrams 1 and 2. -
Page 17: Fitting The Hob To The Worktop
Fitting the hob to the worktop Before fitting the hob into the cut out, a sealing gasket supplied with the hob must be fitted to the edge of the cut out. It is essential that no gaps are left in this seal in order to prevent spillage near the hob seeping into the cabinet below. -
Page 18: Electrical Connections
Electrical connections Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations. THIS HOB MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed. -
Page 19: Permanent Connection
Permanent Connection In the case of a permanent connection, it is necessary that you install a double pole switch between the hob and the electricity supply (mains), with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations. -
Page 20: Wiring Diagram
Wiring diagram Ø 180 4 3 2 1 Ø 180 R Ø 145 R 4 3 2 1 4 3 2 1 Ø 145 4 3 2 1 PLATE...