hit counter script
Honeywell COMBISAFE Manual
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Industrial Equipment
  5. COMBISAFE
  6. Manual

Honeywell COMBISAFE Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TEMPORARY EDGE
PROTECTION
SYSTEM DESCRIPTION
SMB System C

Advertisement

Table of Contents
loading

Related Manuals for Honeywell COMBISAFE

Summary of Contents for Honeywell COMBISAFE

  • Page 1 TEMPORARY EDGE PROTECTION SYSTEM DESCRIPTION SMB System C...

  • Page 2: Table Of Contents

    System C CONTENTS Safety instructions Important General Application area Handling products Traceability DATA Safety Post 4140/4145/4150 Safety Post 4141/4146/4151 Steel Mesh Barrier Mk II 3203 Steel Mesh Barrier 1.3 m Mk II 3204 Steel Mesh Barrier Make-Up 2,6 m Mk II 3217 Steel Mesh Barrier Make-Up 1,3 m Mk II 3218 Steel Mesh Barrier LightWeight Class ABC 2,6m 3240 Steel Mesh Barrier LightWeight Class ABC 1,5 m 3241...

  • Page 3: System C

    Toeboard Holder 4110 Steel Mesh Barrier Adjuster 3224 Steel Mesh Barrier Hinge 3225 Checking Inspection Dismantling Packing Steel Mesh Barrier Packing Steel Mesh Barrier Stair Maintenance Safety checks Reconditioning Scrapping Storage © Combisafe International AB UI SMB System C EN 2033...

  • Page 4: Safety Instructions

    Never use damaged or rusty the guardrail must be inspected materials as this can affect safety. by a competent person before being taken into service again. Contact Combisafe in the event WARNING! of uncertainty. Edge protection that is combined interlinked...

  • Page 5: General

    Traceability • arrange suitable and safe access to the workplace. Most Combisafe products are • close off the area below and marked with a batch number for around the assembly site so that inspection and traceability. persons are not injured by falling The batch number consists of a tools or materials.

  • Page 6: Data

    Data SMB System C DATA Safety Post 4140/4145/4150 System SMB System C Weight 1.8 kg/2.1 kg/2.8 kg Surface finish Aluminium Conforms to EN 13374 class A, B, C Spare parts list Item Part no. Information 1131 Cloxy 100536 Plastic Plug Ø...
  • Page 7 4141 ADJUSTABLE POST 1.15m Item Part number 1133 SMB System C Data 100536 10518 100175, ISO 4017 - M12 x 30 10520 Flexi Safety Posts 4141/4146/4151 System SMB System C Weight 3.1 kg/3.4 kg/4.0 kg Surface finish Aluminium Conforms to EN 13374 class A, B, C Safety Post no.

  • Page 8: Steel Mesh Barrier Mk Ii 3203

    Data SMB System C Steel Mesh Barrier Mk II 3203 Registered design System SMB System Weight 19.4 kg Surface finish Powder coated Conforms to EN 13374 class A, B, C 2599 2599 Steel Mesh Barrier 1.3 m Mk II 3204 System SMB System Weight...

  • Page 9: Steel Mesh Barrier Make-Up 2,6 M Mk Ii 3217

    SMB System C Data Steel Mesh Barrier Make-Up 2.6 m Mk II 3217 System SMB System Weight 9.3 kg Surface finish Powder coated Conforms to EN 13374 class A, B 2599 Steel Mesh Barrier Make-Up 1.3 m Mk II 3218 2599 System SMB System...

  • Page 10: Steel Mesh Barrier Lightweight Class Abc 2,6M 3240

    Data SMB System C Steel Mesh Barrier Lightweight Class ABC 2.6m 3240 Registered design System SMB System Weight 14.2 kg Surface finish Powder coated Conforms to EN 13374 class A, B, C 2602 70,5 Steel Mesh Barrier Lightweight Class ABC 1.5 m 3241 Registered design System SMB System...

  • Page 11: Steel Mesh Barrier Lightweight Class Abc 1,7 M 3242

    SMB System C Data Steel Mesh Barrier Lightweight Class ABC 1.8 m 3242 Registered design System SMB System Weight 10 kg Surface finish Powder coated Conforms to EN 13374 class A, B, C 1756 70.5 Steel Mesh Barrier Lightweight Class A 2.6 m 3245 Registered design System SMB System...

  • Page 12: Steel Mesh Barrier Lightweight Class A 1,5 M 3246

    Data SMB System C Steel Mesh Barrier Lightweight Class A 1.5 m 3246 Registered design System SMB System Weight 7.8 kg Surface finish Powder coated Conforms to EN 13374 class A 1474 211.5 70.5 Steel Mesh Barrier Lightweight Class A 2.0 m 3247 Registered design System SMB System...

  • Page 13: Steel Mesh Barrier Lightweight Class A 0,9 M 3248

    SMB System C Data Steel Mesh Barrier Lightweight Class A 0.9 m 3248 Registered design System SMB System Weight 5.7 kg Surface finish Powder coated Conforms to EN 13374 class A 70.5 Steel Mesh Barrier Lightweight Class A 0.5 m 3249 Registered design System SMB System...

  • Page 14: Steel Mesh Barrier Lightweight Make-Up 2,6 M 3260

    Data SMB System C Steel Mesh Barrier Lightweight Make-Up 2.6 m 3260 Registered design System SMB System Weight 7 kg Surface finish Powder coated Conforms to EN 13374 class A, B 2602 70.5 Steel Mesh Barrier Lightweight Make-Up 1.5 m 3261 Registered design System SMB System...

  • Page 15: Steel Mesh Debris Barrier Lightweight 2,6 M 3266

    SMB System C Data Steel Mesh Debris Barrier Lightweight 2.6 m 3266 Registered design System SMB System Weight 11.7 kg Surface finish Powder coated Conforms to EN 13374 class A, B 2602 70,5 Steel Mesh Debris Barrier Lightweight 1.5 m 3267 Registered design System SMB System...

  • Page 16: Barrier Clip 3220

    Data SMB System C Barrier Clip 3220 For Steel Mesh Barrier and Steel Mesh Barrier Make-Up System SMB System C Weight 0.1 kg Surface finish Hot-dip galvanized Steel Mesh Barrier Stair 3226 Registered design System SMB System Weight 14.1 kg Surface finish Powder coated Designed for staircase slopes of 30°...

  • Page 17: Steel Mesh Barrier Holder 3222

    SMB System C Data Steel Mesh Barrier Holder 3222 System SMB System C Weight 1.3 kg Surface finish Powder coated Spare parts list Item Part no. Information 15020 100175 Steel Mesh Barrier Adjuster 3224 System SMB System Weight 2.6 kg Hexagon head screw 100175, ISO 4017 - M12 x 30 8.8-BZP...

  • Page 18: Steel Mesh Barrier Hinge 3225

    Data SMB System C Steel Mesh Barrier Hinge 3225 Registered design System SMB System S Weight 0.7 kg Surface finish Electro galvanized Item Part no. Information 10534 10536 100206 100126 100090 Surface Treatment Technical Directives Author Creation Date Revised by Revised Date Checked by Checked Date...

  • Page 19: Combistrap 100335

    SMB System C Data Combistrap 100335 System SMB System Length 400 mm...

  • Page 20: Selection And Dimensioning

    Data SMB System C Handling Selection and dimensioning Classification Temporary edge protection is specified in EN 13374 into three different classes, depending on the application and the likely load. • Class A refers to a static load cor- responding to a person leaning against/holding the edge protection or walking/stumbling against the protection.

  • Page 21: Distance Between Safety Posts

    SMB System C Data Distance between Safety Posts Timber guardrails • Timber guardrails may only be used on class A edge protection. • The recommended Timber guardrails quality is at least C24. Max. c/c spacing between Safety Posts • 2.4 m for timber guardrails of 45x95 •...

  • Page 22: Design Of Temporary Edge Protection

    Data SMB System C Design of temporary edge protection EN 13374 sets the following requirements for Classes A, B, and C, edge protection: • Edge protection must be at least 1.0 m high, measured perpendicular to the working sur- face. •...
  • Page 23 100 mm in one direction. Corners The attachments are designed to resist loads in one primary direction. For this reason, Combisafe always recommends the use of two Safety Posts in the corners, one in each direction. Overhang The maximum permitted overreach of the SMB or FRB is ¼...
  • Page 24 Data SMB System C WARNING! Should you increase the effective area of the edge protection, for example by using scaffold sheeting or plywood, the load at a given wind strength will increase. Never make changes without first checking that the permitted wind velocity pressure is not exceeded.
  • Page 25 SMB System C Handling • The Safety Post can be set lower by removing of pin 100122 and removing Cloxy and push- ing the post down. • When using Cast-In Sleeves, the length of the Sleeve must be set so that the Safety Post or the Safety Post Extender is inserted at least 100 mm into the concrete.
  • Page 26 Handling SMB System C VIEW 1140 POST SYSTEM S ( 1 : 10 ) ISOMETRIC VIEW ( 1 : 10 ) VIEW C/C SYSTEM S ( 1 : 10 ) 2. Set the Steel Mesh Barrier Holder VIEW 1102 POST SYST at a suitable height.
  • Page 27 SMB System C Handling 5. Fit the Steel Mesh Barrier on the Steel Mesh Barrier Holder by hooking the mesh in the top hook on the Steel Mesh Barrier Holder and the middle horizontal rod on the Steel Mesh Barrier over the lower hook on the Steel Mesh Barrier Holder.
  • Page 28 Handling SMB System C Important Steel Mesh Barriers must be secured to the Steel Mesh Barrier Holders when installing for Class B requirements. This is achieved using the Combistrap, 100335. For class C minimum overreach need to be two meshes.
  • Page 29 SMB System C Handling Safety post without holder 1. Set the Steel Mesh Barrier on to the Safety Post by positioning the cranked top section of the Steel Mesh Barrier over the top of the Safety Post. 2. Plan the overlap. If one or more of the Steel Mesh Barriers will need to be removed, for example to permit delivery of materials, these...
  • Page 30 Handling SMB System C Steel Mesh Barrier Make-Up 3217 & 3218 & 3260 & 3261 1. Set the Steel Mesh Barrier Make-Up over the Safety Post by hooking the cranked top section of the Steel Mesh Barrier over the top of the Safety Post. 2.
  • Page 31 SMB System C Handling Barrier Clip 3220 & Combistrap 100335 • For extra stability the Barrier Clip 3220 or Combistrap 100335 is available and can be used together with Steel Mesh Barrier and the Steel Mesh Barrier Make-Up. This is normally an advantage when strong winds can occur.
  • Page 32 Handling SMB System C 4. Check that the Barrier Clip is locked. 5. Check that all Barrier Clips are correctly located. Combistrap 100335 can be used the same way as Barrier Clip. Scaffold tubes WARNING! Scaffold tubes may only be installed by a competent person. 1.
  • Page 33 SMB System C Handling 3. Place the scaffold tubes in the fittings.
  • Page 34 Handling SMB System C ToeBoard Holder 4110 > 150 1. Place the toeboard against the attachment or Safety Post on the inside of the edge protection. [mm] NOTE Remember that the toeboard must be at least 150 mm high. 2. Thread the Toeboard Holder onto the Safety Post and down over the toeboard ensuring the Toeboard Holder locks the toeboard onto the attachment or Safety...
  • Page 35 SMB System C Handling Steel Mesh Barrier Adjuster 3224 Lifting 1. Position the Steel Mesh Barrier Adjuster on the Safety Post. Insert the locking pin in an appropriate hole to give a good ergonomical working height for the lever. 2. Hook the hook into the eye on the Steel Mesh Barrier Holder and tighten the strap so that the lever points downwards in a suitable position to...
  • Page 36 Handling SMB System C 4. When the Steel Mesh Barrier is raised, tighten the screw on the Steel Mesh Barrier Holder again, still with one hand on the lever. Tighten the screw to minimum 50 Nm. 5. Continue to lift the Steel Mesh Barriers in sequence, starting at one end and moving on to the next section.
  • Page 37 SMB System C Handling Steel Mesh Barrier Hinge 3225 1. Fit the Steel Mesh Barrier Hinge at the top of a Steel Mesh Barrier, as high as possible. Loosen the bolt and turn the clasp 90 degrees and push it through the opening in the mesh.
  • Page 38 Steel Mesh Barrier Stair at its ends. The connection of the mesh in a corner can in some situations replace a Safety Post so that only one Safety Post is needed in the corner, check with Combisafe under which circumstances this is allowed.
  • Page 39 SMB System C Handling Checking Inspection The installer should continuously Damage report check the edge protection during Edge protection, example assembly. through damage missing A final inspection must be made sections, must be reported at once once assembly is finished, prior to to the site manager for immediate hand over, as follows: action.
  • Page 40 The Barrier Box, 9530, is suitable to pack the Steel Mesh Barrier. Don´t stack beyond this Always read the instruction manual before use - Combisafe accepts no point liability for items that has been altered Only use the Barrier Box for its intended purpose.
  • Page 41 SMB System C Handling Lifting by crane Use suitable 4-legged lifting chain with permissible loadability (SWL) above 1020 kg Max chain spread angle 60°. Lifting with forks The box can be lifted from all sides with forks. When lifting from short side, make sure that the barriers aren’t in the way.
  • Page 42 • Crack free and notch free welds • Deformation • Corrosion • Damage • Wearing • Visible Combisafe marking plate and ID number • Deformed or damaged lifting eyes • No sharp edges If in doubt, consult Combisafe!
  • Page 43 SMB System C Handling VIEW SMB STAIR PACKING ( 1 :10 ) Packing Steel Mesh Barrier VIEW SMB STAIR PACKING ( 1 :10 ) A ( 1 : 10 ) Stair STRAP A ( 1 : 10 ) STRAP The Multibox, 9540, with two sawn wooden boards is suitable to pack the Strap 100335 Strap 100335...
  • Page 44 Check that: • no parts are cut or joined. There are some exceptions. Check with Combisafe in the event of • no parts are bent to excess or in any other way deformed. uncertainty.
  • Page 45 COMBISAFE International Ltd Safety Centre, Cheaney Drive, Grange Park Northampton UK-NN4 5FB Tel.: +44 (0)160 4 660600, Fax: +44 (0)160 4 662960 info@Combisafe.com, www.Combisafe.com...

Table of Contents