Sharp LC-32HI5012E Service Manual page 60

Hide thumbs Also See for LC-32HI5012E:

Table of Contents

8. After program successfully, disconnect the AC plug, put the upgrade file the USB stick and

plug the usb stick in the main board, connect the tool (such as SecureCRT) which you used to

get the log with the tv by the uart debug tool.

9. Set the PC cursor in the window which can show the log information and press the Enter

button of your PC keyboard, do not release the Enter button and connect the AC power, then

you will enter the Mboot of the TV(as the following picture). In the Mboot, you can input

some command to set the tv system.

10. Input "cu" command in the Mboot and press Enter, then the TV will start to upgrade.

6.4.2 For None Secure Chip

1. Connect the Uart debug tool, Disconnect the tool which you used to get log information.

2. Open the MSTV_Tool.exe.

3. Select "Help-> Product Key" and enter Product Key menu, input "prognand" command in the

Product Key menu and press "OK" Button.

4. Select View -> NAND Program (ARM/MIPS) and enter the following Menu. In the Menu, select

the files need as bellow, then press "program" button.

Prepare stage – 1ARM_Munich_Prepare.txt

DRAM script – 2Munich_DDR3_32_MIU0_1_1600_17x17.txt

Tool bin File – 3_tool.bin

Rom Boot Bin File – 4RomBoot.bin

Trigger stage – 5ARM_Munich_Trigger.txt

Table of Contents

Show Quick Links

Table of Contents