Table of Contents
Advertisement
Display
en
}
£
ð
õ
ó
'§"
•©£
--------
22
Remote Start
Energy manager
Empty the condensa-
tion container
~ Page 31
Base unit
Automatic heat
exchanger rinse
Basic appliance care
programme
CoolDown
lights up: Remote start function is activated.
~ Page 25
Lit: appliance is connected to the smart energy system
(Energy manager) (not available in every country)
Empty the condensation container and then rein-
■
sert it.~ Page 31
Then press Start/ A Pause .
Clean the filter in the condensation container.
■
If the optional drain hose* is installed, make sure
■
that the drain hose:
– Is correctly connected. ~ Page 42
– Is not kinked or bent.
– Is not blocked or clogged, e.g. by deposits.
Run the intensive appliance care programme.
■
Check that no debris has found its way into the base
■
unit. Open the maintenance flap and remove any
debris.
Cleaning the base unit ~ Page 45
The heat exchanger is being cleaned automatically. Do
not pull out the condensation container or cancel the
programme while this is displayed.
Not a fault. After a certain period, the appliance will
automatically recommend that you run the basic appli-
ance care programme. Run the basic appliance care
programme. ~ Page 51
The appliance can reach high temperatures when dry-
ing. The CoolDown process reduces the temperature to
prevent damage to the laundry when you:
Pause the programme
■
Cancel the programme
■
Switch off the appliance via the app
■
The CoolDown process does not start until 30 seconds
after pausing/cancelling the programme or switching
off the appliance via the app. You can continue to oper-
ate the appliance during the CoolDown process.
Notes
The drum continues to rotate during the CoolDown
■
process, even if you have paused the programme.
Do not change the programme during the
■
CoolDown process.
Temperature regulation can take up to 10 minutes.
■
Advertisement
Table of Contents
